Presenting My 2005 NGCS MM550 BEAST.

Desmosedici · 16th November 2010, 20:04

Sudarshan, feels like that is Ravi's jeep only as it has Allans workshop name - Sara Extreme 4x4 on its side and Ravi had also mentioned that he had got some work done from Allan

. So before Ravi could post the latest avatar, you have done it.

Sudarshan · 16th November 2010, 20:16

Quote:

Originally Posted by Desmosedici

Sudarshan, feels like that is Ravi's jeep only as it has Allans workshop name - Sara Extreme 4x4 on its side and Ravi had also mentioned that he had got some work done from Allan

. So before Ravi could post the latest avatar, you have done it.

Na baba how can it be his ? & how can I blow his cover like that ? I swear !

BTW the guy on the steering seemed a fat guy , has Ravi gained weight lately ?

Besides taking Panga with a EXO member ( have you seen that ?) can cost me dearly , so no way I could do that , sorry

Sudarshan

Tejas@perioimpl · 16th November 2010, 21:13

Quote:

Originally Posted by Sudarshan

Hi Ravi, recently I saw a Jeep with a similar looking set of wheels , though it was parked ,I was at the opposite side of the road & couldnt stop .

The guy seemed to be having a little relaxed nap , so I thought it would be inappropriate to disturb him.

btw a very Cute looking Jeep that was , convert yours like that .It will look awosome.

You seem to be suffering from a short term memory loss considering the fact that you offroaded with ravi just a couple of days ago and clicked the said pic in lonavala.

Quote:

Originally Posted by Sudarshan

Besides taking Panga with a EXO member ( have you seen that ?) can cost me dearly , so no way I could do that , sorry

Sudarshan

True. Consider this as your first and last warning!

4x4 cruiser · 20th November 2010, 14:17

Sudarshan, That was not at all fair, you the party pooper

. Please take the warning by TEJAS seriously.

Finally after endless visits at ALLAN's office, I made him to manage time for my Jeep and start with my most important requirement, i.e., to open the jeep fully and put a 6 point roll cage and Snorkel. I and Dad were
always inclined towards open jeep, though its got many disadvantages but still thats the way we love it.

These are some of the pictures after the Jeep was partially opened.

Presenting My 2005 NGCS MM550 BEAST.-img_0109.jpg

Presenting My 2005 NGCS MM550 BEAST.-img_0115.jpg

Presenting My 2005 NGCS MM550 BEAST.-img_0249.jpg

Now the major question was whether to keep the B pillar or to remove it. We could have gone for the rollcage with the B pillar but somehow i was not liking the design, hence took a decision to take out the B pillar as
well. Now as seen in the pics above the rear seats are green colour and have back rest too but with my roll cage design either we had to remove the back rest and cut the seats or no seats at all. So to heck with back rest and seats, lets go for flat seats in the back.

This is how the jeep was without B Pillar.

Presenting My 2005 NGCS MM550 BEAST.-img00087201011091420.jpg

Presenting My 2005 NGCS MM550 BEAST.-img00088201011091420.jpg

Presenting My 2005 NGCS MM550 BEAST.-img00089201011091421.jpg

Unfortunately, I was not able to click any more WIP pics. Though after waiting for almost 20 days (which seemed to be a year), the jeep was finally ready for Delivery. I was excited like a Kid and felt it was almost
a new car i am going to take delivery of. I was suppose to reach at ALLANS place around 1700 hrs and this wasone of the longest day, I beleive, the watch somehow never wanted to show 1700 hrs in it.

Once we saw the jeep, their were no words to express our happiness, it was transformed completely in to a true BEAST. The best job, i had ever seen. The roll cage designed by ALLAN has Killing looks and is equally great as far as safety is concerned. My heartiest thanks to ALLAN.

So without furthet ado, here is my BEAST, the 2005 NGCS MM 550.

Presenting My 2005 NGCS MM550 BEAST.-dsc03228.jpg

Presenting My 2005 NGCS MM550 BEAST.-dsc03227.jpg

Presenting My 2005 NGCS MM550 BEAST.-dsc03230.jpg

Presenting My 2005 NGCS MM550 BEAST.-dsc03238.jpg

Presenting My 2005 NGCS MM550 BEAST.-dscn0893.jpg

Click image for larger version

Name: DSCN0893.jpg
Views: 549
Size: 271.3 KB
ID: 456730

Presenting My 2005 NGCS MM550 BEAST.-dscn0906.jpg

Presenting My 2005 NGCS MM550 BEAST.-img_0118.jpg

Presenting My 2005 NGCS MM550 BEAST.-img00093201011101700.jpg

Presenting My 2005 NGCS MM550 BEAST.-img00094201011101701.jpg

jeepster · 20th November 2010, 14:22

finally official pictures of the beast.

are there any other chances made apart from roll cage & snorkel?

BTW allan must have WIP pictures, right?

4x4addict · 20th November 2010, 14:59

That's an awsome transformation of your stock 550.

malgudi · 20th November 2010, 15:35

Nice looking jeep.

So any plans for modifications?

Sudarshan · 20th November 2010, 15:50

Quote:

Originally Posted by 4x4 cruiser

Sudarshan, That was not at all fair, you the party pooper

.

Aahh you hurt me

, but I couldnt help
, but dont you think that you being unfair with us, by not posting the pics early ? ( here ar bhp )

YOU ARE LATE HERE

Remember we follow FB also

Anyways next time you see me , the axe is all yours

BTW great pics of a nice Jeep

Sudarshan

MileCruncher · 20th November 2010, 16:48

Firstly congrats on buying the NGCS MM550 and what a transformation.

BTW have you changed the GB or drive train as well or is it stock?

ArunV · 20th November 2010, 17:08

The new forms looks great. Is this the normal height of the jeep. or an extra leaf or shackle lift is done?

Which is this color? Can we get this color for a new registration?

fazalaliadil · 20th November 2010, 18:47

4X4Cruiser,
Thats an awesome job done on your Jeep.
Undoubtedly one of the best on the forum.
Looks are clean and propionate without the B pillar, the roll cage has come out very good. Superb paint job and shade too. Now, under the hood too please.
If you need grilles for the front indicators (on fender) PM me.
Regards,

MileCruncher · 20th November 2010, 19:26

BTW 4X4Cruiser I see the fender indicator behind the wheel well only on the Driver's side.

Planning to get it on the other side too I hope else you'll have do "Aagey Se RIGHT" only

BolBolero · 21st November 2010, 18:59

Awesome job on the jeep buddy. Once again Exteremepower has done wonders.

@Ravi, looks even more killer in the flesh!

4x4 cruiser · 24th November 2010, 18:41

Quote:

Originally Posted by Sudarshan

Aahh you hurt me

, but I couldnt help
, but dont you think that you being unfair with us, by not posting the pics early ? ( here ar bhp )

YOU ARE LATE HERE

Remember we follow FB also

Anyways next time you see me , the axe is all yours

BTW great pics of a nice Jeep

Sudarshan

FB is simple, no details required but TBHP without details means nothing anyways I shall put the AXE to good use this time

, I am tied up with work and thats why constant delay in my posts.

Quote:

Originally Posted by MileCruncher

Firstly congrats on buying the NGCS MM550 and what a transformation.

BTW have you changed the GB or drive train as well or is it stock?

Thank you, no everything else is Stock.

Quote:

Originally Posted by ArunV

The new forms looks great. Is this the normal height of the jeep. or an extra leaf or shackle lift is done?

Which is this color? Can we get this color for a new registration?

Thnak You Arun, No extra leaf, everything is stock , though it always looks bigger then other Jeeps.

Quote:

Originally Posted by fazalaliadil

4X4Cruiser,
Thats an awesome job done on your Jeep.
Undoubtedly one of the best on the forum.
Looks are clean and propionate without the B pillar, the roll cage has come out very good. Superb paint job and shade too. Now, under the hood too please.
If you need grilles for the front indicators (on fender) PM me.
Regards,

Thank you sir, I shall send you a p.m, if anything is required.

Quote:

Originally Posted by MileCruncher

BTW 4X4Cruiser I see the fender indicator behind the wheel well only on the Driver's side.

Planning to get it on the other side too I hope else you'll have do "Aagey Se RIGHT" only

Searching for the other indicator or else you suggestion

Quote:

Originally Posted by BolBolero

Awesome job on the jeep buddy. Once again Exteremepower has done wonders.

@Ravi, looks even more killer in the flesh!

Thank you Gautam.

sreejeshmp · 24th November 2010, 20:29

WoW Wow Handsome Extreme Jeep congratulations no more words to say.

I almost changed my mind to take a 4x4 Safari but this jeep makes me to think again and go for the thar.

- sreejesh

16th November 2010, 20:04	#16
Desmosedici Senior - BHPian Join Date: Nov 2009 Location: White Village Posts: 1,484 Thanked: 586 Times View My Garage	Sudarshan, feels like that is Ravi's jeep only as it has Allans workshop name - Sara Extreme 4x4 on its side and Ravi had also mentioned that he had got some work done from Allan . So before Ravi could post the latest avatar, you have done it.
	() Thanks

20th November 2010, 14:17	#19
4x4 cruiser BHPian Join Date: Jul 2010 Location: Navi Mumbai Posts: 119 Thanked: 7 Times	Sudarshan, That was not at all fair, you the party pooper. Please take the warning by TEJAS seriously. Finally after endless visits at ALLAN's office, I made him to manage time for my Jeep and start with my most important requirement, i.e., to open the jeep fully and put a 6 point roll cage and Snorkel. I and Dad were always inclined towards open jeep, though its got many disadvantages but still thats the way we love it. These are some of the pictures after the Jeep was partially opened. Now the major question was whether to keep the B pillar or to remove it. We could have gone for the rollcage with the B pillar but somehow i was not liking the design, hence took a decision to take out the B pillar as well. Now as seen in the pics above the rear seats are green colour and have back rest too but with my roll cage design either we had to remove the back rest and cut the seats or no seats at all. So to heck with back rest and seats, lets go for flat seats in the back. This is how the jeep was without B Pillar. Unfortunately, I was not able to click any more WIP pics. Though after waiting for almost 20 days (which seemed to be a year), the jeep was finally ready for Delivery. I was excited like a Kid and felt it was almost a new car i am going to take delivery of. I was suppose to reach at ALLANS place around 1700 hrs and this wasone of the longest day, I beleive, the watch somehow never wanted to show 1700 hrs in it. Once we saw the jeep, their were no words to express our happiness, it was transformed completely in to a true BEAST. The best job, i had ever seen. The roll cage designed by ALLAN has Killing looks and is equally great as far as safety is concerned. My heartiest thanks to ALLAN. So without furthet ado, here is my BEAST, the 2005 NGCS MM 550. Attached Thumbnails
	(1) Thanks

20th November 2010, 14:22	#20
jeepster Senior - BHPian Join Date: Oct 2008 Location: MH24 aka LATUR Posts: 1,694 Thanked: 1,927 Times View My Garage	finally official pictures of the beast. are there any other chances made apart from roll cage & snorkel? BTW allan must have WIP pictures, right? Last edited by jeepster : 20th November 2010 at 14:29.
	() Thanks

20th November 2010, 14:59	#21
4x4addict Distinguished - BHPian Join Date: Nov 2007 Location: Chennai Posts: 4,483 Thanked: 4,531 Times View My Garage Infractions: 0/1 (5)	That's an awsome transformation of your stock 550.
	() Thanks

20th November 2010, 15:35	#22
malgudi BHPian Join Date: Apr 2006 Location: Mumbai Posts: 355 Thanked: 183 Times View My Garage	Nice looking jeep. So any plans for modifications?
	() Thanks

20th November 2010, 16:48	#24
MileCruncher Senior - BHPian Join Date: Jan 2009 Location: MH01 Posts: 4,235 Thanked: 592 Times View My Garage	Firstly congrats on buying the NGCS MM550 and what a transformation. BTW have you changed the GB or drive train as well or is it stock?
	() Thanks

20th November 2010, 17:08	#25
ArunV BHPian Join Date: Feb 2009 Location: Kochi, Bangalore Posts: 203 Thanked: 81 Times	The new forms looks great. Is this the normal height of the jeep. or an extra leaf or shackle lift is done? Which is this color? Can we get this color for a new registration? Last edited by ArunV : 20th November 2010 at 17:19. Reason: Edit:
	() Thanks

20th November 2010, 18:47	#26
fazalaliadil Senior - BHPian Join Date: Oct 2008 Location: Hyderabad Posts: 2,022 Thanked: 672 Times View My Garage	4X4Cruiser, Thats an awesome job done on your Jeep. Undoubtedly one of the best on the forum. Looks are clean and propionate without the B pillar, the roll cage has come out very good. Superb paint job and shade too. Now, under the hood too please. If you need grilles for the front indicators (on fender) PM me. Regards, Last edited by fazalaliadil : 20th November 2010 at 18:51.
	() Thanks

20th November 2010, 19:26	#27
MileCruncher Senior - BHPian Join Date: Jan 2009 Location: MH01 Posts: 4,235 Thanked: 592 Times View My Garage	BTW 4X4Cruiser I see the fender indicator behind the wheel well only on the Driver's side. Planning to get it on the other side too I hope else you'll have do "Aagey Se RIGHT" only
	() Thanks

21st November 2010, 18:59	#28
BolBolero BHPian Join Date: Nov 2008 Location: Mumbai Posts: 369 Thanked: 271 Times	Awesome job on the jeep buddy. Once again Exteremepower has done wonders. @Ravi, looks even more killer in the flesh!
	() Thanks

24th November 2010, 20:29	#30
sreejeshmp BHPian Join Date: May 2007 Location: Areekode Posts: 651 Thanked: 821 Times	WoW Wow Handsome Extreme Jeep congratulations no more words to say. I almost changed my mind to take a 4x4 Safari but this jeep makes me to think again and go for the thar. - sreejesh
	() Thanks