willys cj3a, restored in Hyderabad

adnan_1212 · 2nd December 2010, 15:41

hello, jeepers, i am a new member of Team Bhp. Recently restored a wilys cj3a except for the engine which is from MandM classic. The 4x4 is active and most of the parts are original. I fully agreed with senior jeepers who have been saying that restoring a willys will not only burn a hole in your pocket but also the job has to be taken at the cost of relations especially WIFE

.

adnan_1212 · 2nd December 2010, 16:55

my jeep in action. will upload few more showing the condition in which i purchased.

MileCruncher · 2nd December 2010, 17:23

Good CJ you got there.

Please post more pictures as well as let us know about the restoration.

Shubz · 2nd December 2010, 19:33

Beautiful is not the word for it! Good to see a Jeep topic after days of looking at Gypsy topics!

Great job Adnan. Please post your restoration story along with pics.

Long live the Jeep!

Adding: The experts can advise about the glove compartment and the data plate location. Not sure if that is how it was born with.

Thankz
Shubz

chanu · 3rd December 2010, 07:19

Hi Adnan, nice to see another neat Hyderabadi jeep adding up this nice forum. Your jeep is orginal and done up simple and clean, nice off roading pictures. Please do let us know this fellas restoration story and before and after pictures.

I completely agree to you my friend restoring a jeep will not only burn a hole in your pocket but will also burn the fingers inside .. he he!! I have burnt mine recently in the name of Cj2A

apart from this miss fire from the close ones though it vanished off once they saw the out come (finished product).

Enjoy flying as on road you drive......off road you fly.

adnan_1212 · 3rd December 2010, 17:05

@Shubz: Thanx for the appreciation. Subject to correction i dont think so till late 60s or 70s any model of the willys was produced with a glove box. That glove box is an addition as per Indian comforts. Had i been the first owner i would never had touched the dash board, but the dash data plate is supposed to be where the glove box is so i got it fixed on the it.

adnan_1212 · 3rd December 2010, 17:31

The restoration process as requested.

Shubz · 3rd December 2010, 19:25

Even the late 60's models did not come with a glove compartment (again subject to corrections by the experts). Except for that eye sore of a glove compartment, Immaculate Jeep you got there! Congrats!

2nd December 2010, 15:41	#1
adnan_1212 BHPian Join Date: Aug 2010 Location: Hyderabad Posts: 83 Thanked: 35 Times	willys cj3a, restored in Hyderabad hello, jeepers, i am a new member of Team Bhp. Recently restored a wilys cj3a except for the engine which is from MandM classic. The 4x4 is active and most of the parts are original. I fully agreed with senior jeepers who have been saying that restoring a willys will not only burn a hole in your pocket but also the job has to be taken at the cost of relations especially WIFE. Attached Thumbnails
	() Thanks

2nd December 2010, 16:55	#2
adnan_1212 BHPian Join Date: Aug 2010 Location: Hyderabad Posts: 83 Thanked: 35 Times	my jeep in action. will upload few more showing the condition in which i purchased. Attached Thumbnails
	() Thanks

2nd December 2010, 17:23	#3
MileCruncher Senior - BHPian Join Date: Jan 2009 Location: MH01 Posts: 4,235 Thanked: 592 Times View My Garage	Good CJ you got there. Please post more pictures as well as let us know about the restoration.
	() Thanks

2nd December 2010, 19:33	#4
Shubz Senior - BHPian Join Date: Sep 2010 Location: Bangalore Posts: 1,905 Thanked: 1,149 Times	wow.. Beautiful is not the word for it! Good to see a Jeep topic after days of looking at Gypsy topics! Great job Adnan. Please post your restoration story along with pics. Long live the Jeep! Adding: The experts can advise about the glove compartment and the data plate location. Not sure if that is how it was born with. Thankz Shubz
	() Thanks

3rd December 2010, 07:19	#5
chanu Senior - BHPian Join Date: Feb 2009 Location: APX to AP 29 Posts: 1,483 Thanked: 150 Times View My Garage	Hi Adnan, nice to see another neat Hyderabadi jeep adding up this nice forum. Your jeep is orginal and done up simple and clean, nice off roading pictures. Please do let us know this fellas restoration story and before and after pictures. I completely agree to you my friend restoring a jeep will not only burn a hole in your pocket but will also burn the fingers inside .. he he!! I have burnt mine recently in the name of Cj2A apart from this miss fire from the close ones though it vanished off once they saw the out come (finished product). Enjoy flying as on road you drive......off road you fly.
	() Thanks

3rd December 2010, 17:05	#6
adnan_1212 BHPian Join Date: Aug 2010 Location: Hyderabad Posts: 83 Thanked: 35 Times	@Shubz: Thanx for the appreciation. Subject to correction i dont think so till late 60s or 70s any model of the willys was produced with a glove box. That glove box is an addition as per Indian comforts. Had i been the first owner i would never had touched the dash board, but the dash data plate is supposed to be where the glove box is so i got it fixed on the it.
	() Thanks

3rd December 2010, 17:31	#7
adnan_1212 BHPian Join Date: Aug 2010 Location: Hyderabad Posts: 83 Thanked: 35 Times	The restoration process as requested. Attached Thumbnails
	() Thanks

3rd December 2010, 19:25	#8
Shubz Senior - BHPian Join Date: Sep 2010 Location: Bangalore Posts: 1,905 Thanked: 1,149 Times	Even the late 60's models did not come with a glove compartment (again subject to corrections by the experts). Except for that eye sore of a glove compartment, Immaculate Jeep you got there! Congrats!
	() Thanks