[vnabhi]

Originally Posted by Vid6639

Thought of trying the CF wrap on that area. The guy who does the wraps did an absolute mind blowing job. One single piece with no multiple pieces anywhere. Here's how it looks before the number plate went on:


This a must do for Figo owners who have the plastic fading and becoming whitish issues.

Looks cool. Though my Figo is still black where it should be, I'd like to give this a shot. I did have challenges with my Fiesta after it was around 2 years old, with the black portions of the ORVM fading, as also the dashboard, not to mention the honeycomb radiator grill.

How much did it cost you overall? And is this available at 3M?

[rajni]

Originally Posted by arun_josie

Also, it was a kind of mini team-bhp meet there, met the mods Vid6639(Figo) and n_aditya(New Ritz ZDI), nkrishnap(Fiat Linea) and his friend, Nelson (Punto) and finally the Red Rocket(Yes he is not yet done with the Red-Black theme ). There were couple of tbhp stickered Vernas as well.

Great! Team-BHP is really making an impact anywhere in the car industry. After I became a Team-BHP'ian I noticed this anywhere I go in Bangalore. When you mention you are BHP'ian the treatment is different. With many of the new generation shop owners themselves being BHP'ians it's warmer than ever. I also try to educate guys doing business outside BLR circle and not aware of Team-BHP yet whenever I get a chance to interact with them.

Well, friends can someone also show some work done on the interior especially on the leather?

[autocrat]

My Linea looked like it just came out of a mud bath. Guys at 3M did a splendid job to bring back the look and freshness...

[nkrishnap]

^^ Superb transformation from a muddy car to a gleaming one. I have covered up the car for this week to keep it for atleast a week.

[autocrat]

Originally Posted by nkrishnap

I have covered up the car for this week to keep it for atleast a week.

No such option for me sir.. Biking to office has been banned - only mode of transport now is Linea...

[speed kills]

My 1.6 turns two next week. Thanks to 3M nobody believes me

[starter]

Originally Posted by speed kills

My 1.6 turns two next week. Thanks to 3M nobody believes me

Hey speed kills,
Your polo looks great! It indeed is difficult to beleive that it is 2 years old.
Just one question, though off-topic; Did you replace your head lamps with the one that comes on the new polo? If not, where did you get this done?
Cheers,
Deepak

[speed kills]

Originally Posted by starter

Just one question, though off-topic; Did you replace your head lamps with the one that comes on the new polo? If not, where did you get this done?

Hi Deepak! My headlamps were imported close to a year back from Germany.
However, you could get you're hands on a similar set from the VW dealer. It retails at 7k.

[khan_sultan]

Got the 3M carpets for the front seats of the Prado and some 3M carbon fiber on the rear door top.




Also got the front nudge guard letters and lines done in carbon fiber. Looks cool. The person did an amazing job. Took a long time but totally worth it.

[devil_klm]

Had been to 3M HSR yesterday to get PPF for my Swifty. This become a mandatory for me as i am taking back my car to kerala for few months and will be driven by our driver there. Again the 3M guys did a good job in that. Happy to see Karthik and Autocart over there and to spent some time

[500ContyCruiser]

Got detailing done yesterday on my car. Met Siddu sir and motomaverick.

Thanks Siddu sir for giving personal touch on my car. Felt good being there.

[motomaverick]

Originally Posted by 500ContyCruiser

Got detailing done yesterday on my car. Met Siddu sir and motomaverick.

Thanks Siddu sir for giving personal touch on my car. Felt good being there.

Good to meet up with you as well and speak a little about Ladakh. So where are the pictures of the CF & PPF treatment?

[Fabiaous]

Got the RE-70 Sunfilms back on the side windows done. As always good job done by Siddu and folks , also installed 3M carbon fiber film on B pillars.
I can see visible difference now in heat rejection by 3M film on the sides compared to Garware sun film on wind shield.
Good to see Floor mats available in 3 colours to choose from from the earlier grey mats which I got last year.

[D'Artagnan]

Originally Posted by Fabiaous

Got the RE-70 Sunfilms back on the side windows done. As always good job done by Siddu and folks , also installed 3M carbon fiber film on B pillars.
I can see visible difference now in heat rejection by 3M film on the sides compared to Garware sun film on wind shield.
Good to see Floor mats available in 3 colours to choose from from the earlier grey mats which I got last year.

Could you tell me how much it cost you for fitting the sunfilm? I had it done for my innova (cr-70) it cost me a whopping 17k at 3M showroom next to M.S Ramiah hospital. I have it covered under a five year warranty of bubbles and peel proof. I have a feeling I was overcharged.

[Vid6639]

Originally Posted by captain_slow

Could you tell me how much it cost you for fitting the sunfilm? I had it done for my innova (cr-70) it cost me a whopping 17k at 3M showroom next to M.S Ramiah hospital. I have it covered under a five year warranty of bubbles and peel proof. I have a feeling I was overcharged.

Rates are fixed based on car sizes. Was yours done only on side or both sides and front?

17K for only sides is the right price.