Team-BHP (https://www.team-bhp.com/forum/)

-   In-Car Entertainment (https://www.team-bhp.com/forum/car-entertainment/)

-   -   Audio setup for Wagon R Vxi (https://www.team-bhp.com/forum/car-entertainment/12909-audio-setup-wagon-r-vxi-3.html)

Hi ,

With the help of Sam :) , I have been able to get in touch with the newly-appointed distributor for JBL in W. Bengal. The distributor told me to go for

1) GTO427 for front.
2) GTO937 for rear speakers.

Would this be better than 426e + 936e?

Thanks. Awaiting responses urgently!!!

Johy

Definitely YES !! They are the advance models based on 426 and 936 respectively. You can check JBL's website for the latest models.

http://www.jbl.com/car/products/defa...&Region=EUROPE

Hi Sourav and everyone,

Got them JBL GTO 7 series ordered and the stuff should be here in a couple of days. Now here I am almost decided on the Pioneer 5750 or 6850 and have been reading through the forums over and over again -- and I get struck by this...do I really need them fancy lights on the Head Unit? Or should I go for a drab-looking, decent-sounding Blaupunkt?

Any Blaupunkt models to look up in the 7 to 8.5 K range? In general, do they sound better than Pioneers? It would be hard for me to "try out before you buy." Where I live, it would be difficult to get one decent model-- unless one orders the stuff.

Thanks.

Blau units used to coem with Merc. I think they are better than Pios and moreover you haev warranty and service by Mico or so.

What prices were quoted for the Pios?

No, you don't. I like that attitude man. Listen to the HUs and buy the one you like.

Well as I *still* wait for my speakers to arrive, I have not found much headaway with the Pios. Only one vendor sells Pios and he has only the following:

1. 5750 with B&W - Rs 10250/-
2. 5850 without B&W - Rs 8400/-
3. 6850 is not available :mad:

Wow, thats cool. In Bombay's car audio markets, sometimes even the paan-wala in the market stocks a piece of Pioneer or two.

:p

Here are the pictures of my ICE Setup and The Wooden Box to hold the Co-Axial Rear Speakers.

That's a very lousy way to connect the speaker wire to the box by just drilling a couple of holes on the side of the box. Get a proper terminal cup screwed to the side of the box to connect the speaker cables.

WHts tht! Coz you wanted to remove speakers you sacrificed for local connectors??? Find a good solution. Dont use taht connectors as they are for electrical work and can be more resistive.

Aint me right guys?

oh, I like the jbl cubicle sub ;)

Yes I too realize the same this now. But I am not getting about the terminal cup you are talking about. Can you please provide the photo or weblink for this terminal type ? I need to understand how it works.

Yes, I agree. These type of connectors will offer more resistance to the signal to the speakers. I will change it soon. Please suggest me a better option for connecting the wires so that I can still detach speakers whenever requried. I would like to do this work myself, back into engineering day ;) !!

And that "Jbl Cubicle Sub" is actually a Paper Towel Pack and was a freebee to me by my Audio Installer (Preetham @ Sound Factor, BLR).

Hi Sourav,

Thanks a million for those pictures!

Hi B&T,

I would like to see a picture of those connectors too!

Johy

[img=http://img135.imageshack.us/img135/9743/terminalcup5dc.th.jpg]

The above cup is an example. MX makes such connectors locally and can be found at electronics stores.

i ahve similar but rectangular shaped terminal plug fitted on to my subw box.I got it from Gunbir for 500/rs,really worth the money.

http://i41.photobucket.com/albums/e2...3/172f656a.jpg

Hi friends,

I finally received (with heaps of help from Sam :Cheering: ) the GTO 7 series speakers yesterday. Here are the pictures.. I have decided on the Pioneer 5850. Just a basic install...in boxes like Sourav has suggested.

Here are the pictures of the JBL GTO937 and GTO437 .









...sorry poor pictures...best I could with the SE K700i


Johy