[clipto333]

Originally Posted by s0uljah

Looking nice there Clipto333!!!

How you enjoying the sound of those ESK's? What sort of music do you enjoy particularly??

hi souljah,

the esk's are great. me really enjoying the sq. i listen to all types of music from ghazals to psychedelic trance. the sub is underpowered rightnow but i think its enough for me for the time being.

mobike - Nice pics clips and congratulations on the installation.

Whats the price of Hertz comps and the Hertz subwoofer ( It's 15inch, 300watts rms?)

hi,

thanks man. the comps are for around 9300/- and sub for 11700/- just a guess. gunman will confirm the prices.

the sub is es380 15" i think its around 700w rms if im not wrong. again gunman will confirm.

cheers

rishabh

[low_bass_makker]

Originally Posted by clipto333

the sub is es380 15" i think its around 700w rms if im not wrong.

sir your sub is 450 watts rms .....



HERTZ - Special Car Stereo

[clipto333]

Originally Posted by low_bass_makker

sir your sub is 450 watts rms .....



HERTZ - Special Car Stereo

hi lbm,

oops, i wasnt sure i mixed up badly. phaji suggest an amp for this boofer. lol

thanks
rishabh

[navin]

Originally Posted by clipto333

phaji suggest an amp for this boofer. lol

You got a budget! Think 300 W rms. The cheapest amp for this sub is the JBL 301.1 at 12-14K, then you could get Audison, Alpine, and if you have the stomach Tru Tech or Steg.

[low_bass_makker]

Originally Posted by navin

You got a budget! Think 300 W rms. The cheapest amp for this sub is the JBL 301.1 at 12-14K, then you could get Audison, Alpine, and if you have the stomach Tru Tech or Steg.

hmmm steg.....they few amp which are 0.25 ohms stable .....Sir they make some nice amp...they also have a A-class also....

about clip you can get JBL 301.1 but it is 200 watts rms at 4 ohms as your sub is a SVC....you can get a 601.1 it will give 424 watts at 4 ohms....and you can look for pioneer D510 monoblock it gives 300 watts at 4 ohms....

JBL Car & Marine Audio

JBL Car & Marine Audio

anyways which one you are using now.....

[navin]

Originally Posted by low_bass_makker

about clip you can get JBL 301.1 but it is 200 watts rms at 4 ohms....and you can look for pioneer D510 monoblock it gives 300 watts at 4 ohms.........

The D510 is a good amp. i forgot about that. I'm told it costs about 10K WITHOUT Bill or Warranty. The JBL amps are with B&W and so are the Audisons, Steg, Tru Techs, etc..I have seen Alpine amps with and without B&W and I recommend getting the B&W.

[clipto333]

Originally Posted by navin

You got a budget! Think 300 W rms. The cheapest amp for this sub is the JBL 301.1 at 12-14K, then you could get Audison, Alpine, and if you have the stomach Tru Tech or Steg.

hi navin,

how much do the tru tech amps cost...ive never had a listen. would love to own one but dont have the stomach. :-)

im thinking of an alpine amp. dont know the price though.

thanks
clip. (you all call me clip now)

Originally Posted by low_bass_makker

about clip you can get JBL 301.1 but it is 200 watts rms at 4 ohms as your sub is a SVC....you can get a 601.1 it will give 424 watts at 4 ohms....and you can look for pioneer D510 monoblock it gives 300 watts at 4 ohms....


anyways which one you are using now.....

hi lbm,

im using a pio 944. it would be better i stick on this as the 301.1 gives less power. 601.1 is out of my budet. and i somehow dont like jbl. no offence to anyone.

what about alpine. how much did you sell your mrd 1005 for. dont mind second hand. what amps are you using lb.

thanks
clip

[Bass&Trouble]

Originally Posted by clipto333

hi navin,

how much do the tru tech amps cost...ive never had a listen. would love to own one but dont have the stomach. :-)

im thinking of an alpine amp. dont know the price though.

thanks
clip. (you all call me clip now)




hi lbm,

im using a pio 944. it would be better i stick on this as the 301.1 gives less power. 601.1 is out of my budet. and i somehow dont like jbl. no offence to anyone.

what about alpine. how much did you sell your mrd 1005 for. dont mind second hand

I know a couple of people who want to sell off used Alpine monoblock amps. If you're interested, I could find out whether they are still available, price etc.

[low_bass_makker]

Originally Posted by clipto333

im using a pio 944. it would be better i stick on this as the 301.1 gives less power. 601.1 is out of my budet. and i somehow dont like jbl. no offence to anyone.

what about alpine. how much did you sell your mrd 1005 for. dont mind second hand. what amps are you using lb

i would suggest to keep 944 for the while and get a new one a bit later when you have he moolah to spare....

The mrd1005 would be a over kill for your application it gives out 700 x 2 at 4 ohms....and 1000 at 2 ohms.....it will be better that you get another sub and connect them in parllel to give each of them 500 and make them happy....

Right now I am using Steg K-Series....check out this thread for more info about my setup.....

http://www.team-bhp.com/forum/ask-gu...er-system.html

[navin]

the 944 was not a bad amp. keep it and save up for the 601.1 or a 1005 (if LBM can find one) it will be a significant upgrade.

tru tech's cost a lot I assume the local prices would exceed 1L.

[low_bass_makker]

Originally Posted by navin

the 944 was not a bad amp. keep it and save up for the 601.1 or a 1005 (if LBM can find one) it will be a significant upgrade.

tru tech's cost a lot I assume the local prices would exceed 1L.

the tru 2 ch T-2.100 which I think is the most basic series of tru would cost you approx a little less than 40k...if the prices are not updated....it will give you 400 rms in bridge mode.....

[clipto333]

Originally Posted by low_bass_makker

i would suggest to keep 944 for the while and get a new one a bit later when you have he moolah to spare....

The mrd1005 would be a over kill for your application it gives out 700 x 2 at 4 ohms....and 1000 at 2 ohms.....it will be better that you get another sub and connect them in parllel to give each of them 500 and make them happy....

Right now I am using Steg K-Series....check out this thread for more info about my setup.....

http://www.team-bhp.com/forum/ask-gu...er-system.html

hi,

can a 944 deliver 500w rms x 2 ? didnt know that. can you or anyone post the specification for 944. my hard disk is not with me rightnow.

nice looking amps there lbm. cannot comment as i dont know how they sound.(no offence) would love to hear them. when's the delhi meet. do you come to punjab often?

bhai jalandhar mein meet karado...lol kidding

1 more thing, did you see the install pics of my ice? can you or anyone tell me what damping mats are used?

thanks
clip

[hydrashok]

Originally Posted by clipto333

... can you or anyone tell me what damping mats are used?

Those look like the new AZ Audiocomp Fonomats. That colour & texture is kind of like a signature.

[low_bass_makker]

Originally Posted by clipto333

hi,

can a 944 deliver 500w rms x 2 ? didnt know that. can you or anyone post the specification for 944. my hard disk is not with me rightnow.

nice looking amps there lbm. cannot comment as i dont know how they sound.(no offence) would love to hear them. when's the delhi meet. do you come to punjab often?

bhai jalandhar mein meet karado...lol kidding

1 more thing, did you see the install pics of my ice? can you or anyone tell me what damping mats are used?

thanks
clip

the spec of 944 are here....




it does not make 500 x 2 but 250 x 2 in bridged mode....total of 500 watts...

Sure I would love that you audition my car...there is a meet thread going on in the meet section hope to see you here in delhi as our cheap guest.....

The install of your car is done at Driven`s ......I think he is the best person to comment on this.....BTW were you not there when the install was done....

[clipto333]

Originally Posted by hydrashok

Those look like the new AZ Audiocomp Fonomats. That colour & texture is kind of like a signature.

what is the price for this damping mats? it was in a roll.
i was told that it was dynamat.

thanks

clip