[romyeo4u]

Originally Posted by clipto333

hi,

nice install. thanks for the pics

No probs , I have even more pics .

Originally Posted by clipto333

you didn't tell us(sam,hydra) what size the enclosure is and if it is build according to jbl's recommendations. the enclosure specs should be in the manual :-)

MY bad, I didn't notice much , they had enclosures for the 4-12 sub and they fitted it, and i was getting late to the office , I didn't notice those things asked them to get it done accordingly , and i spent whole day over there and saddest thing was after that I had to go to office in the evening.

Would it be possible to judge it , if i take the pics and upload it?

Originally Posted by clipto333

About the fader thing, i only listen to my comps in the front. it is according to what you prefer. some like the sound coming from all the sides.

cheers

clip

Got you , when fader was 0 , the Bass was 4 it was all BOOM BOOM no lyrics , it sounded like a bass tube, then as per Navin increased the fader to front and decreased the Bass to 1 its clean , Air Supply's songs were like crystal clear.

[low_bass_makker]

Originally Posted by romyeo4u

No probs , I have even more pics .

good then why wait post them asap....

[romyeo4u]

WIRING


Amp





BOX

[navin]

Originally Posted by romyeo4u

BOX

all those speakers for one car?

[Sam Kapasi]

No certainly not obviously he's taken a picture of the shelf. lol. He can't have put 4 pairs of 937 and 6 sets of 607 in his santro.

[low_bass_makker]

Originally Posted by navin

all those speakers for one car?

Navin Ji is in good mood again...must have returned from any party I think....lol

ok in the picture there are 2 607 component kits 6 pair of 937 6x9...that is total of 8 pair of speakers I they go inside in one car what will be the result

[romyeo4u]

wish someone donated me money to build such a beast !!!

[Sam Kapasi]

Actually LBM, in that picture, there are 4 pairs of GTO937, 2 sets of GTO607C, 1 pair of GTO8627 (ford size), 1 pair of GTO637 and 1 pair CS3196.

[romyeo4u]

Sam !!!! Monster Doll

[rocksterraghu]

Originally Posted by low_bass_makker

Even if he is using the HU amp to run the 6x9 the fader function will work then also....

I know that, but I was trying to find out the reason for the imbalance

[low_bass_makker]

Originally Posted by rocksterraghu

I know that, but I was trying to find out the reason for the imbalance

It might be happining because the HU preout might be connected to the rear RCA and the rear speaker must also be connected to the rear channel ...thats why no fader function is work......

[navin]

Originally Posted by Sam Kapasi

Actually LBM, in that picture, there are 4 pairs of GTO937, 2 sets of GTO607C, 1 pair of GTO8627 (ford size), 1 pair of GTO637 and 1 pair CS3196.

and a pair of 507, 2 pairs of 427....and why was that pic taken in 2004? camera date was not corrected after the new camera battery was installed??

hey I have seen a car with 4 Pio 4-5 way 6x9 in the rear shelf, 4 pio 6" coax (one for each door), and 4 TS20 (A-B pillars) mated to 2 12" Pio subs in the boot all driven by 3 944s and a huige 3.0uf cap thrown in as well. All the wiring was from BOSS. Funnily there was no alternator whine and if you heard the system from across the road it was resonably clear. I did not dare enter that "dragon".

The user (I know they guy) was very happy. Since he bought all the PIO stuff from my installer she was happy too. After that expereince I dont recommend ICE products. My name for that install was "Bheja Fry".

[low_bass_makker]

Originally Posted by navin

hey I have seen a car with 4 Pio 4-5 way 6x9 in the rear shelf, 4 pio 6" coax (one for each door), and 4 TS20 (A-B pillars) mated to 2 12" Pio subs in the boot all driven by 3 944s and a huige 3.0uf cap thrown in as well. All the wiring was from BOSS. Funnily there was no alternator whine and if you heard the system from across the road it was resonably clear. I did not dare enter that "dragon".

The user (I know they guy) was very happy. Since he bought all the PIO stuff from my installer she was happy too. After that expereince I dont recommend ICE products. My name for that install was "Bheja Fry".

thanks god atlest he is powering them with 3 amps....and that to 944 atleast he knows how much power is required...I have a install in which there was 6x9 and a sub and a ts-20 all driven from a single and the mighty sony 222...and the owner was enjoying the distortion....lol

dragon and bheja fry....nice name....

[navin]

Originally Posted by low_bass_makker

dragon and bheja fry....nice name....

I think your car (atleast the rear seat) should be called "Master of Bark". It is not a deregatory name. There is a song called "Master of Sparks" by ZZ Top and that is my inspiration.

"In the back of jimmys mack
Stood a round steel cage
Welded into shape by slim,
Made out of sucker gauge"

[low_bass_makker]

Originally Posted by navin

I think your car (atleast the rear seat) should be called "Master of Bark". It is not a deregatory name. There is a song called "Master of Sparks" by ZZ Top and that is my inspiration.

"In the back of jimmys mack
Stood a round steel cage
Welded into shape by slim,
Made out of sucker gauge"

it is the group with long beard and I have there popular song "legs" on hot tracks which used to come on DD when I was in school...