1.5 Lakhs Budget for ICE in Cr-V EDIT: Now installed Pics on page 4

navin · 19th August 2007, 09:54

Quote:

Originally Posted by Mumbaiya

Who's the dealer for Audison in Mumbai? Also for Hertz?

PM Gunbir.

Autophile · 19th August 2007, 10:21

Quote:

Originally Posted by low_bass_makker

I would prefer the High end Focals and Audison combo better....

Have you heard one ?

low_bass_makker · 17th September 2007, 12:11

Hmm Ajay Bhai any update on the setup, you were telling me few days ago. Something 3 way 8 inch front.

DerAlte · 17th September 2007, 13:52

Quote:

Originally Posted by low_bass_makker

Hmm Ajay Bhai any update on the setup, you were telling me few days ago. Something 3 way 8 inch front.

Illusion? or some other brand?

Mumbaiya · 17th September 2007, 14:00

Hi Guys,
I have nearly completed my Install. All thanks to Ajay for recommending a fabulous setup.

My Budget has gone way beyond but I totally love it. Pictures have been clicked by B&T so he will upload them for you.

The install is not yet complete in terms of the Processor & the Head Unit. Currently I am using a Head Unit from my older car that is the Alpine IVA-W200.
I am receiving the IVA-202R today in the Evening.

The Install goes as follows:-

Illusion Audio Carbon Series ND 8.1 x 2 (Front & Rear)
Illusion Audio Carbon Series ND 5 (Front)
Steg QM 75.4x Amp (Front)
Steg QM 75.2x Amp (Rear)
Steg K2|01 Amp (Sub)
Ground Zero GZRW 12XD-AL (Sub in a Sealed Enclosure)
AIV Green Power & Ground Cables
Supra RCA Interconnects
Noise Kill Sound Deadening

As far as the other installs includes :-

Alpine IVA-W202R Headunit
Alpine KCE-415i iPod Video Interface
Alpine KCE-300BT Bluetooth Interface
Alpine PXE-H650 Processor (Yet To Come)
Alpine HCE-C200 F & R Camera System (Yet To Come)

The Install is extremely discreet in terms of looks. Tried to hide everything. The Boot only consists of the Subwoofer and the all the Amps are under the 2 Front Seats.

Once again I would like to thank Ajay (B&T) for this fabulous install. Also I would like to thank all of you for helping me out.

Thanking you,
Crazy Mumbaiya

moralfibre · 17th September 2007, 14:03

Congrats Mumbaiya, when can we hear it? It is I think the first time someone tried an Illusion 3-way using Steg XO's. I am dying to hear this. When do we get a demo sir?

Mugen_Power · 17th September 2007, 14:05

Quote:

Originally Posted by Mumbaiya

Thanking you,
Crazy Mumbaiya

You are really crazy.

@B&T, Do post pics sir..

Mumbaiya · 17th September 2007, 14:07

Well I will only demo the vehicle after the Alpine Processor is here which I am trying to get within a weeks time. The Alpine Head Unit does not have inbuilt Crossover Settings therefore the Front Speakers are acting like a Full Range Setup. More details can only be given by B&T as he can explain it properly.

payam · 17th September 2007, 14:13

congrat mumbaiya,mindblowing set up.i can imagin how it sounds dude.
Once again another nice job from ajay,big cheer to you man.

moralfibre · 17th September 2007, 14:22

I am more interested to know how to wire such a setup? Ajay can we know please?

vikram18 · 17th September 2007, 14:24

WHOA! That sounds BIG!!! Demo is certainly called for

hydrashok · 17th September 2007, 14:37

Sounds gooooood! Waiting for pics

Bass&Trouble · 17th September 2007, 14:53

Quote:

Originally Posted by Mumbaiya

I am receiving the IVA-202R today in the Evening.

That's great news. Hope the processor follows soon.

Quote:

Originally Posted by Mumbaiya

Once again I would like to thank Ajay (B&T) for this fabulous install. Also I would like to thank all of you for helping me out.

I should thank you for managing with a partly, remotely co-ordinated install, and managing with the very little amount of time I could dedicate to overseeing it. But it has turned out really well. Full marks to Starline for the installation, considering it was their absolute first time!

The list of equipment has been provided by Mumbaiya; the hook up is as described-

Two channels of the QM75.4X drive the front 8" midbasses while the other two power the 5.25s and the tweets. The Illusion Audio first order passive crossover is utilised for the 5.25 and the 1" Low Fs tweeter while the 8" hands over to the 5.25" at 450 Hz, actively by use of Steg Audio Quality X-over Modules (AQXM Modules).

Another 2 channel Steg QM75.2X drives the rear 8" Illusion Audio Carbon component set.

The Steg K Competition Series 2.01 drives the Ground Zero GZRW12XD-AL dual 4 ohms 500 W rms subwoofer in bridged mode.

I have received PMs for the WIP pics and pics of the individual equipment, I'll post them shortly. Just have the pics of the system just after installation.

The Illusion Audio speakers had their U-pots painted in beige to match the door panel color. Likewise for the grills. Mumbaiya wanted to keep everything looking as stock as possible.

Front Doors:

Rear Doors:

Current Head Unit:

Sub:

Amps: (No thats not Michael Jackson kickin it

)

The car was completely stripped and damped, flooring et al. There is not a whisper from the doors, even with all four 8" drivers playing without any high-pass. The parcel tray also comes down completely over the subwoofer enclosure without any rattles etc with the sub playing at full tilt. While it sounds excellent right now, time alignment with the processor and high-pass for all 8s will make for a world of improvement.

moralfibre · 17th September 2007, 15:02

Post edited with resized pictures

moralfibre · 17th September 2007, 15:48

Great pictures Ajay. I am still confused as to how such a system is wired. I mean do you use the existing XO's that come with the 8.1 and add the 5.25" driver over the amplifier or how? What do those modules do?

Looks like a stealth install to me. Great job.

17th September 2007, 12:11	#48
low_bass_makker Senior - BHPian Join Date: Mar 2006 Location: Faridabad Posts: 6,815 Thanked: 305 Times View My Garage	Hmm Ajay Bhai any update on the setup, you were telling me few days ago. Something 3 way 8 inch front.
	() Thanks

17th September 2007, 14:00	#50
Mumbaiya BHPian Join Date: Jan 2005 Location: Mumbai Posts: 105 Thanked: 0 Times	Hi Guys, I have nearly completed my Install. All thanks to Ajay for recommending a fabulous setup. My Budget has gone way beyond but I totally love it. Pictures have been clicked by B&T so he will upload them for you. The install is not yet complete in terms of the Processor & the Head Unit. Currently I am using a Head Unit from my older car that is the Alpine IVA-W200. I am receiving the IVA-202R today in the Evening. The Install goes as follows:- Illusion Audio Carbon Series ND 8.1 x 2 (Front & Rear) Illusion Audio Carbon Series ND 5 (Front) Steg QM 75.4x Amp (Front) Steg QM 75.2x Amp (Rear) Steg K2\|01 Amp (Sub) Ground Zero GZRW 12XD-AL (Sub in a Sealed Enclosure) AIV Green Power & Ground Cables Supra RCA Interconnects Noise Kill Sound Deadening As far as the other installs includes :- Alpine IVA-W202R Headunit Alpine KCE-415i iPod Video Interface Alpine KCE-300BT Bluetooth Interface Alpine PXE-H650 Processor (Yet To Come) Alpine HCE-C200 F & R Camera System (Yet To Come) The Install is extremely discreet in terms of looks. Tried to hide everything. The Boot only consists of the Subwoofer and the all the Amps are under the 2 Front Seats. Once again I would like to thank Ajay (B&T) for this fabulous install. Also I would like to thank all of you for helping me out. Thanking you, Crazy Mumbaiya
	() Thanks

17th September 2007, 14:03	#51
moralfibre Team-BHP Support Join Date: Dec 2004 Location: MH-12 Posts: 8,449 Thanked: 13,967 Times	Congrats Mumbaiya, when can we hear it? It is I think the first time someone tried an Illusion 3-way using Steg XO's. I am dying to hear this. When do we get a demo sir? Last edited by moralfibre : 17th September 2007 at 14:05.
	() Thanks

17th September 2007, 14:07	#53
Mumbaiya BHPian Join Date: Jan 2005 Location: Mumbai Posts: 105 Thanked: 0 Times	Well I will only demo the vehicle after the Alpine Processor is here which I am trying to get within a weeks time. The Alpine Head Unit does not have inbuilt Crossover Settings therefore the Front Speakers are acting like a Full Range Setup. More details can only be given by B&T as he can explain it properly.
	() Thanks

17th September 2007, 14:13	#54
payam BHPian Join Date: Oct 2006 Location: pune Posts: 924 Thanked: 2 Times View My Garage	congrat mumbaiya,mindblowing set up.i can imagin how it sounds dude. Once again another nice job from ajay,big cheer to you man.
	() Thanks

17th September 2007, 14:22	#55
moralfibre Team-BHP Support Join Date: Dec 2004 Location: MH-12 Posts: 8,449 Thanked: 13,967 Times	I am more interested to know how to wire such a setup? Ajay can we know please?
	() Thanks

17th September 2007, 14:24	#56
vikram18 BHPian Join Date: May 2007 Location: pune Posts: 607 Thanked: 27 Times View My Garage	WHOA! That sounds BIG!!! Demo is certainly called for
	() Thanks

17th September 2007, 14:37	#57
hydrashok Senior - BHPian Join Date: Aug 2006 Location: In my Office Posts: 2,528 Thanked: 17 Times View My Garage	Sounds gooooood! Waiting for pics
	() Thanks

17th September 2007, 15:02	#59
moralfibre Team-BHP Support Join Date: Dec 2004 Location: MH-12 Posts: 8,449 Thanked: 13,967 Times	Post edited with resized pictures Last edited by moralfibre : 17th September 2007 at 15:14.
	() Thanks

17th September 2007, 15:48	#60
moralfibre Team-BHP Support Join Date: Dec 2004 Location: MH-12 Posts: 8,449 Thanked: 13,967 Times	Great pictures Ajay. I am still confused as to how such a system is wired. I mean do you use the existing XO's that come with the 8.1 and add the 5.25" driver over the amplifier or how? What do those modules do? Looks like a stealth install to me. Great job.
	() Thanks