Pioneer DEH-P6850 Trouble

bhavit46 · 29th August 2007, 16:24

Hi! I have installed Pioneer DEH-P6850 headunit in my Palio S10 around a year back. It looked awesome with its blue display and motorised panel and was working fine.
But last night it started working abnormally. Even when i touched it, it switched off by itself and restarted by itself and that happened a number of times. The HU worked perfectly if you use the remote control. If i have to change from tuner to compact disc, then the HU goes blank (No lights on the display) and suddenly after 5 seconds it restarts again.
What according to you should be the problem? Should i get the HU cleaned with an electronic cleaner? Kindly help me....

panky12345 · 29th August 2007, 18:18

"reset" it and you'll be fine.

saurabhkum · 29th August 2007, 20:47

Just remove tha detachable pannel, check if the connectors at the back of pannel and in the front of the unit and then fit the pannel back. This happens mainly due to detachable pannel not fitted properly.
Hope this solves your problem .
Saurabh

Jaggu · 29th August 2007, 23:29

saurabh has a point, check contacts as well as see if the points are clean, also if any one of the contacts are broken or bent

29th August 2007, 16:24	#1
bhavit46 BHPian Join Date: Mar 2006 Location: Ahmedabad Posts: 66 Thanked: 18 Times	Pioneer DEH-P6850 Trouble Hi! I have installed Pioneer DEH-P6850 headunit in my Palio S10 around a year back. It looked awesome with its blue display and motorised panel and was working fine. But last night it started working abnormally. Even when i touched it, it switched off by itself and restarted by itself and that happened a number of times. The HU worked perfectly if you use the remote control. If i have to change from tuner to compact disc, then the HU goes blank (No lights on the display) and suddenly after 5 seconds it restarts again. What according to you should be the problem? Should i get the HU cleaned with an electronic cleaner? Kindly help me....
	() Thanks

29th August 2007, 18:18	#2
panky12345 Senior - BHPian Join Date: Mar 2006 Location: New Delhi Posts: 2,697 Thanked: 171 Times	"reset" it and you'll be fine.
	() Thanks

29th August 2007, 20:47	#3
saurabhkum BHPian Join Date: May 2007 Location: Mumbai Posts: 479 Thanked: 115 Times	Just remove tha detachable pannel, check if the connectors at the back of pannel and in the front of the unit and then fit the pannel back. This happens mainly due to detachable pannel not fitted properly. Hope this solves your problem . Saurabh
	() Thanks

29th August 2007, 23:29	#4
Jaggu Team-BHP Support Join Date: May 2004 Location: Bangalore Posts: 20,215 Thanked: 15,907 Times	saurabh has a point, check contacts as well as see if the points are clean, also if any one of the contacts are broken or bent
	() Thanks