Team-BHP
(
https://www.team-bhp.com/forum/)
can you try pulling the -VE directly from battery ?
also it would be very helpful if you post more details about 7" Touchscreen from AMSIMPEX
cost
model
how to get it shipped
Quote:
Originally Posted by ghpk
(Post 1470870)
can you try pulling the -VE directly from battery ?
also it would be very helpful if you post more details about 7" Touchscreen from AMSIMPEX
cost
model
how to get it shipped |
I will try that also( - Ve from Bty) but how will it help??? Not sure.
The touch screen costed 11000/-+4% Tax.
They ship all over India, though mine I collected personally as I was passing through Mumbai.
Here is the settings in BIOS that I had configured.
After power Failure - Stay off
Wake On LAN from S5 - Stay Off
ACPI Suspend State - S3 State
Wake System from S5 - Disabled.
I have spoken to Sheldon from iRide he has agreed to repair/replace my PSU. Hopefully this will sort put my freaky carputer. He is really a helpful guy.Sending the PSU back to him this weekend.
Quote:
Originally Posted by techfreak
(Post 1478294)
I have spoken to Sheldon from iRide he has agreed to repair/replace my PSU. Hopefully this will sort put my freaky carputer. He is really a helpful guy.Sending the PSU back to him this weekend. |
Great!! . that's the best thing i like about iride. local service and support is good.
just imagine if you have ordered it from mp3car or mini-itx. :(
techfreak. any updates on PSU ?
Quote:
Originally Posted by nisarg86
(Post 1485019)
techfreak. any updates on PSU ? |
Yups, have sent the PSU to iRide, they are sending a LB 160D, hope things will be fine.
I am planning to put a OBD sensor in my carputer.
Has anyone any knowledge of what OBD module will work on my model???
323 or 327.......?????????
Have you solved the power supply issue. how is the sunlight readability of this particular touch screen?
Today I recd the new power supply from iRide a LB 160 D, No it has not solved the power supply issue, its exactly the same.
So its the motherboard which is at fault & not the power supply.
Shall be spending some time tomorrow to figure out whats wrong.
But must appreciate iRide for changing my power supply even though it was not faulty.
@techfreak. Did you try the BIOS settings ? Otherwise Get the Giagbyte as suggested by Gigy. Intel's Atom mobo are buggy.
I am using Intel GCLF2 board with 160W PSU and absolutely no issues with standby and wakeup.
Another small setback, the guy whom I ordered for a Gigabyt GA GC 230D has backed out saying the model is not avbl. Perforce I have ordered a Intel GCLF2 from
Panache.com after reading sdh's reply, hope it works or else another 5 grands down the drain!
Thought the good note is that apart from automatic start the system is working flawlessly GPS, music etc.
Expected to receive the motherboard in few days time, shall be updating next after the installation of new MB.
Any help how to transfer the bluesoleil activation after I change the MB. I am chaging from a Intel GCLF to Intel GCLF2 MB, do I have to reinstll everything???
Though I think as the chipset is same I dont have to!!!!????
Any experience on above issues, plenlighten.
Quote:
Originally Posted by sdh
(Post 1500927)
I am using Intel GCLF2 board with 160W PSU and absolutely no issues with standby and wakeup. |
I think I will hav to order for the same as th Gigabyte GA GC 230 is not avbl here in Nasik
All times are GMT +5.5. The time now is 08:11. | |