Audiobahn Amplifier

ggoyal_83 · 12th October 2009, 02:44

How good is Audiobahn as a quality brand?

I found a used Audiobahn amp wih following specs:

Audiobahn A2X400HQ 2-Channel High Current Amplifier

Stable down to 1 ohm in bridged mode to drive subwoofers with a blistering 1600 W rms. Detailed Specs are as follows.

Output Power at 12.5V:
2 x 200W @ 4 ohm
2 x 400W @ 2 ohm
2 x 600W @ 1 ohm
1 x 400W @ 4 ohm bridged
1 x 800W @ 2 ohm bridged
1 x 1600W @ 1 ohm bridged
Freq. Response: 10Hz ∼ 40kHz (±1dB)
S/N Ratio: >100dB
Fuse: 4 x 30A
Dimensions: 15.8" x 11.9" x 3.4" (40.1cm x 30.3cm x 8.7cm)

It is in perfect working condition. Ideal for driving components with high power or for very powerful sub.

Being sold for 18K. is it a good deal?
Currently, I am using Hertz Energy compos and ID sub...with Alpine MRV-F340 4-channel amp.

Reason for upgrading amp: To obtain better sound quality.

s0uljah · 12th October 2009, 02:48

Bass... there will be some trouble in this thread!

That is a hell of an amp if your going to be driving the woofers to deliver a final load of 1 ohm but in your case you would be running the comps and sub.

navin · 12th October 2009, 10:30

Bass and Trouble is not associated with Audiobahn and has has not been associated for a long long time.

panky12345 · 12th October 2009, 11:11

Quote:

Originally Posted by navin

Bass and Trouble is not associated with Audiobahn and has has not been associated for a long long time.

He's asking beacuse B&T has put this amplifier for sale in the classifieds.

As regards audiobahn, its an overrated crap.. i've used audiobahn 4 channel 3004T claiming 300 W RMS at 4 ohms. Trust me, sony 222 was louder than that.

I dont know about this specific high end amp.. but seriously feel that you have better options.

12th October 2009, 02:44	#1
ggoyal_83 BHPian Join Date: Aug 2006 Location: Noida Posts: 29 Thanked: 0 Times	Audiobahn Amplifier How good is Audiobahn as a quality brand? I found a used Audiobahn amp wih following specs: Audiobahn A2X400HQ 2-Channel High Current Amplifier Stable down to 1 ohm in bridged mode to drive subwoofers with a blistering 1600 W rms. Detailed Specs are as follows. Output Power at 12.5V: 2 x 200W @ 4 ohm 2 x 400W @ 2 ohm 2 x 600W @ 1 ohm 1 x 400W @ 4 ohm bridged 1 x 800W @ 2 ohm bridged 1 x 1600W @ 1 ohm bridged Freq. Response: 10Hz ∼ 40kHz (±1dB) S/N Ratio: >100dB Fuse: 4 x 30A Dimensions: 15.8" x 11.9" x 3.4" (40.1cm x 30.3cm x 8.7cm) It is in perfect working condition. Ideal for driving components with high power or for very powerful sub. Being sold for 18K. is it a good deal? Currently, I am using Hertz Energy compos and ID sub...with Alpine MRV-F340 4-channel amp. Reason for upgrading amp: To obtain better sound quality.
	() Thanks

12th October 2009, 02:48	#2
s0uljah Senior - BHPian Join Date: Feb 2006 Location: BLR Posts: 2,222 Thanked: 26 Times View My Garage	Bass... there will be some trouble in this thread! That is a hell of an amp if your going to be driving the woofers to deliver a final load of 1 ohm but in your case you would be running the comps and sub.
	() Thanks

12th October 2009, 10:30	#3
navin Team-BHP Support Join Date: Mar 2004 Location: Mumbai Posts: 25,198 Thanked: 9,300 Times	Bass and Trouble is not associated with Audiobahn and has has not been associated for a long long time.
	() Thanks