[Mi10]

Sorry for the poor quality pics - Shot from my mobile without enough lighting

[Mi10]

Not much of them..still

[Mi10]

Here you go... Hertz ECX 165

[Mi10]

The Amps:
For Front stage - RF PoWer T400-2
For Rear fill - RF PuNch P300-2
For Mono - RF PriMe R500-1

Didnt take Install Pics of Sub - Just had one final one

[Mi10]

Not having too many pics when the actual FG was made,

[Mi10]

The Actual Mounting and Finishing of FG

[Sn1p3r]

beautiful, very neat install.

Now its time to pump up the volume

How do we hear the sound, maybe you can record the sound in lossless format FLAC or Apple lossless and upload it on yousend it or Tbhp, not sure.

Love the hardwork and the final results. All the best!

[donarun]

Originally Posted by Mi10

Tunning is really confusing - Especially the TA part (and that manual is C-R-A-P). I ll have to check with fellow Bhpians in this regard. I hope we meet sometime this weekend.

Though X693 is a good HU, but many mention in their reviews that the manual is not upto the mark ... but seriously is the manual that crap ?

Great pictures, install looks neat. Waiting for the cost split up.

[Mi10]

I wanted to publish the cleaned up pics first - but it ll have to wait for this weekend, So thought of giving out the Cost details

All figures rounded off, in INR
Cost of Equipments:
HeadUnit (X693) - 8,000
Front Components (ESK 163L) - 14,000
Rear Fills (ECX 165) - 4,000
Amplifier for Components (T400-2) - 12,000
Amplifier for Coaxials (P300-2) - 10,500
Amplifier for Subwoofer (R500-1) - 7500
Amp Kit (RFK-4D) - 6000
Subwoofer (12" GZRW - XDAL) - 15000
Enclosure (1.15 cu.ft) - 1000
Installation - 7000
Damping of Boot(Wurtz) - 3000
Total - 88,000 (only)

HU, Amps, Amp Kits from US
Rest of Equipments from India

Still Damping of Doors left..

[panky12345]

congrats on that neat install!

[SPARKled]

Congrats so finally I hope you have got that dream system that you have always wanted.

Just a few question:
1) Does the FG enclosure for the mid range and tweets reduce the Field of View as I see it is protruding quite a bit inside the cabin. Also it is very very visible to any one outside so I guess you need to beef up your car security.
2) Why have you amplified the rear co axials. They are as it very sensitive and could have easily been driven by the HU. Now that they are amplified dont you run the risk of drowning out your front components especially in a small car like the i10?

[Mi10]

Originally Posted by SPARKled

Congrats so finally I hope you have got that dream system that you have always wanted.

Just a few question:
1) Does the FG enclosure for the mid range and tweets reduce the Field of View as I see it is protruding quite a bit inside the cabin. Also it is very very visible to any one outside so I guess you need to beef up your car security.
2) Why have you amplified the rear co axials. They are as it very sensitive and could have easily been driven by the HU. Now that they are amplified dont you run the risk of drowning out your front components especially in a small car like the i10?

Thanks buddy,
1) Not by any margin that you can't drive around safe. ya security system is now bit kaput - need to get it done
2) My front components give almost twice the rated power of the rear fills, kinda compensates for it. (Also, there always exists a 'fader' option) I ll have rear passengers quite a few times and i dont want them to hear only the kick (b)ass

[frankmehta]

Super install. I have seen the pictures in this thread more than three times already since morning. Love the pillars. And great choice of equipment! Cheers!

[Gill]

Good A-pillar build up!Credit to the installer!Spare wheel access will be problem cause of amp rack, won't it be?
I10 has a better trunk for ICE then swift!

[Sound_Affects]

Congrats on a wonderful install, very neat indeed



Regards,
Jasveen