Hi,
This is the setup in my new swiftVxi-2007
DEH-P6950IB Features- Pure blue dot-matrix OEL (Organic EL) display
- MOSFET 50W x 4
- MP3 / WMA playback
- iPod® direct control
- USB adapter ready
- WAV file playback
- BMX (Bitmetric Equalizer)
- EEQ
- 5-mode preset equalizer
- 2-mode custom preset equalizer
- 7-band digital graphic equalizer
- Bass Boost
- 2-way crossover: HPF / LPF
- 3-mode selectable loudness
- Rotary Commander
- Direct Sub Drive
- 3 RCA pre-outs (front+rear+subwoofer)
- Spectrum analyzer
- Multi-language display (English / Spanish / Portuguese)
- Remote Controller
- AUX-in (rear)
- Flap face
TS-C130R Component Speaker[front door's]
More Images
5¼" REV Component Speaker Package with 180 Watts Max. Power
- Kevlar Brand Fiber Composite Cone Woofer
- 1" Lightweight Soft Dome Tweeter
- Butyl Rubber Surround
The TS-C130R 5-1/4" REV component speaker package features Kevlar® fiber composite cone woofers for exceptional sound quality, wave guides for optimal sound dispersion, 1" soft dome tweeters, and hot yellow cones.
The TS-C130R includes an outboard crossover network, handles 180 watts max. music power, and delivers a frequency response of 35Hz to 32kHz. A projected pole yoke evenly distributes magnetic force for lower distortion, and our Voice Coil Cooling System (VCCS) reduces heat so you can play louder, longer
TS-E6996 co axial's Features- 360W MAX.
- 3-Way Speaker
- 6" x 9" (16 x 24cm) woofer / 43mm midrange / 12mm tweeter
- KEVLAR® Brand Fiber/Pulp Composite cone woofer
- Projected Pole Yoke Design
- Butyl rubber sound for smoother response
TS-SW1241D Premier® 12" Shallow-Mount Subwoofer
Mounted in custom made box
More Images High Res
Premier® 12" Shallow-Mount Subwoofer with 1400 Watts Max. Power
- 350 Watts Nominal Power
- Unique Design with just 3-1/4" Mounting Depth
- Small Enclosure Use (0.5 ~ 1.0 Cubic Feet)
Our newest line of subwoofers are designed to provide wider installation options for a broad range of vehicles. These "Shallow-Mount" Subwoofers feature multiple patent-pending features to deliver the big bass performance of a full-size subwoofer, but in a compact design that can be installed either behind or under seats depending on the type of vehicle. The mounting depth is just 3-1/4" - less than half a typical subwoofer in this class.
This 12" shallow subwoofer handles 1400 watts max., 350 watts nominal power, and delivers deep bass with top-notch sound quality thanks to features like Pioneer's extremely strong and lightweight IMPP Composite Double Cone Woofer, the patent-pending M-shaped Surround, and more.
One of the new patent-pending features is called the "Air Suspension Control System". This design locks in air between the main cone and drive cone, ensuring smoother and more precise movement of the cones, for superior linearity. The locked-in air behaves like a spring, so there's no need for a traditional spider structure. The drive cone also deflects air pressure inside the enclosure, which further contributes to the remarkable bass of the small package.
GM-D510M Mono Class D Power Amplifier
More Images
1000 Watts Maximum Power Mono Class D Power Amplifier
- 500 Watts Continuous Power
- Class-D Amplifier
- PWM Regulated MOSFET Power Supply
All-Powerful: The explosive GM-D510M Class D amplifier delivers massive power with less heat—and less distortion—than a conventional amp. Its pulse width modulation (PWM) circuit efficiently outputs only the lower frequencies, perfect for powering that monster sub. And all this power—a thunderous 1000 watts (max) into 2 ohms, or 600 into 4—comes in a small chassis, saving space for your install. The GM-D510M includes a MOSFET output section, screw-type speaker terminals, and oversized power/ground terminals.
2-Ohm Mono Stable
The GM-7200M is built to efficiently handle low-impedance loads, down to 2 ohms. That's perfect for a pair of 4-Ohm Woofers like the Pioneer TS-W306C's, or running a Dual Voice Sub like the TS-W306DVC. And it doesn't just “handle” them: it continually monitors and adjusts the power supply voltage rails, for continuous, clean output.
Variable Crossover (40 ~ 240Hz, -24dB/Octave)
For added flexibility, the variable crossover lets you set the levels at which higher-frequency signals will be filtered out, so that the remaining lower-frequency signals get sent to your sub(s). Where they belong. This optimizes your system's efficiency and delivers the best possible sound quality. This step-up feature is a really useful tool for fine-tuning your system.
Thinking to provide 2 channel amp for rear spk's.
Requesting audio guru's to reply on the setup
Thnx in advance...