[motorheadinc]

Welcome jaskirat,
Nice Intro and the Fiat just rocks man,

Do keep us updated with the UNO job.

I would suggest you to create a separate thread dedicated to the UNO project.

Trust me it would benefit a lot from the experience of the gurus on this forum.

You will have a refined job with least mistakes...

[Jaskirat]

Dear Guys,

Thanks for the very warm welcome. It feels great to be part of this forum, and to have an opportunity of sharing my views with each one of you.

1. Fiat Uno Upgrade: The project is scheduled to start sometimes in September 2008 when the Uno reaches me from Bangalore. I shall keep updating the forum on the progress.

2. Ford Fiesta Wheel Upsizing: I have ordered a set of MOMO Corse Silver Alloys in size 6.5Jx15" with an offset of 38mm for the Fiesta. I intend shodding her with Michelin Pilot Preceda 2 in size 195/50/R15. The odometer error is 1.2% which is well within the acceptable limits. I shall post some pictures when the lady is ready. She is also getting a K&N Induction Kit.

Comments and suggestions on the above are always welcome.

Best regards

Jaskirat Singh Nagra

[motorheadinc]

Well the speedometer error can be corrected using some basic technique
PM me if you are interested.

BTW why are you sourcing the UNO from Bangy???
AFAIK the second hand cars are the most expensive in Bangy and add to that the cost of getting it to Chandigarh.

[Jaskirat]

Originally Posted by motorheadinc

Well the speedometer error can be corrected using some basic technique
PM me if you are interested.

BTW why are you sourcing the UNO from Bangy???
AFAIK the second hand cars are the most expensive in Bangy and add to that the cost of getting it to Chandigarh.

Hi motorheadinc,

The Fiat Uno is my car that was sent to Bangalore to my sister who is there. It was acting as a school bus for my nephews. They have now got a new car so that Uno can be sent back. Incidently, the Uno is registered in Chandigarh.