Automech exhausts

ksethuram · 12th July 2006, 12:43

My friend had a mufler in his corsa , while servicing he was advised not to have it as it will reduce the vehicles pickup. Is it true???

~ H O N D A ~ · 16th July 2006, 00:39

Quote:

Originally Posted by viper

Hi,

If its only sound you are looking at then the answer is yes only a muffler change will do.

Viper

Hey Viper
do you deal in mufflers....

Im planning to visit you maybe on monday for the water leakage problem

manveet · 1st August 2006, 23:45

Hi all,

I have a 1.5 OHC and want to go in for a free-flow exhaust with headers ..

Please give me contacts of people in Delhi that do a good job. Also, I would appreciate a break up of the cost?

If someone could give me first hand info that would be icing on the cake.

Looking forward to your help guys ..

Manveet

vikram_d · 12th September 2006, 16:53

Has anybody fitted automech exhausts to a swift and if yes what is their opinion? Would like to go for a FF for my swift. Kindly advice.

Vikram

team dragstar · 12th September 2006, 18:15

automech exaust is for sound and show only. why dont you contact viper performance.. he is excellent.. good clean work ... cost effective... as the power gains are concerned

elf · 12th September 2006, 19:18

@vikram_d: I'd like to second what team_dragstar says... Just installed my free-flow on my Lancer from ViperPerformance & am really happy.
http://www.team-bhp.com/forum/vbpicg...?do=view&g=281)

Gave him a damn tough brief - want no sound / vibration in the cabin upto 3000RPM, & post that, want only a little bit of sound on the outside, with no resonance in the cabin whatsoever.

He's also said that I should use the car after installation & figure out exactly the kind of tuning that I wanted for 7-10 days, & that he'd rectify any issues I had, if existent.

So far, it's been about 6 days & am really happy, (Note that I'm a pain in the butt type of customer!)

As regards the other exhaust 'specialist' often mentioned on this forum, I've heard enough negative remarks about their material quality & fabrication. However, am not taking names as I don't want to slander anyone without firsthand experience.

My advice - stick with Viper. PM me or him for details.

speedzak · 12th September 2006, 20:48

Quote:

Originally Posted by vikram_d

Has anybody fitted automech exhausts to a swift and if yes what is their opinion? Would like to go for a FF for my swift. Kindly advice.

Vikram

As you're in Bangalore, Contact Psycho and get his take on this!
He is by far the best you can get in South!

harmon_bro · 12th September 2006, 21:11

Quote:

Originally Posted by vikram_d

Has anybody fitted automech exhausts to a swift and if yes what is their opinion? Would like to go for a FF for my swift. Kindly advice.

Vikram

Hi Vikram,
I got a FFE system installed on my Lancer last week. Custom made here in Chennai.

Check out the video of the car in action.

http://www.youtube.com/watch?v=fQnFg1W0A1w

vikram_d · 14th September 2006, 10:32

I have PM'ed psycho. But no reply as yet. Will wait and see. I already have all the raw materials i need to make a Free flow in SS. All i need is the expertise. What are people's opinion about Fazil of FRK Racing in Bangalore. I heard from a few people that he is also very good.

Vikram

angad777 · 14th September 2006, 21:49

Got my Custom made free flow exhaust installed on my Ikon 1.3 Flair a few days back. You cant believe the change in the experience of my josh Machine.

The power delivery has become instant and like a SBK the pikup doest wait a second, the more i accelerate the instant the acceleration.

And oh my god the SOUND!!!!! I opted for the Medium sound for my exhaust and to my pleasure its Very exact the way i wanted it to be.

here's a sound sample:

http://www.speedyshare.com/647339188.html

Rudra Sen · 14th September 2006, 21:58

Note from the support team: Thread merged.

heavy_foot · 15th September 2006, 06:21

hey just downloaded that audio clip...nice growl ..can you post a picture of end can/muffler.

angad777 · 16th September 2006, 10:28

More pics:

http://flickr.com/photos/myikon

grvanand · 16th September 2006, 13:02

Guys i called one Mr. [FONT=Arial]Abdul Khalick in Bangalore and he quoted me Rs. 10,500/ for full exhaust system for my 1998 Carb Zen. Please give me your thoughts on this and share your experiences if anyone have installed it recently on a carb Zen. [/FONT]

vikram_d · 16th September 2006, 14:52

Quote:

Originally Posted by grvanand

Guys i called one Mr. [FONT=Arial]Abdul Khalick in Bangalore and he quoted me Rs. 10,500/ for full exhaust system for my 1998 Carb Zen. Please give me your thoughts on this and share your experiences if anyone have installed it recently on a carb Zen. [/FONT]

I spoke to Abdul Khallick also for my Swift and here is what happened. He first told me that it is readily available and then on the day the delivery was supposed to come thru he told me that there was some problem and would take anothr 10 days. That reminds I still have to go get my advance refunded from him.

Cheers..

12th July 2006, 12:43	#226
ksethuram BHPian Join Date: Feb 2006 Location: Chennai , London (now) Posts: 233 Thanked: Once	My friend had a mufler in his corsa , while servicing he was advised not to have it as it will reduce the vehicles pickup. Is it true???
	() Thanks

1st August 2006, 23:45	#228
manveet Senior - BHPian Join Date: Jul 2006 Location: New Delhi Posts: 1,094 Thanked: 732 Times View My Garage	Hi all, I have a 1.5 OHC and want to go in for a free-flow exhaust with headers .. Please give me contacts of people in Delhi that do a good job. Also, I would appreciate a break up of the cost? If someone could give me first hand info that would be icing on the cake. Looking forward to your help guys .. Manveet
	() Thanks

12th September 2006, 16:53	#229
vikram_d Senior - BHPian Join Date: Jul 2006 Location: Bangalore Posts: 2,427 Thanked: 1,185 Times	Has anybody fitted automech exhausts to a swift and if yes what is their opinion? Would like to go for a FF for my swift. Kindly advice. Vikram
	() Thanks

12th September 2006, 18:15	#230
team dragstar BHPian Join Date: May 2006 Location: mumbai Posts: 80 Thanked: 0 Times View My Garage	automech exaust is for sound and show only. why dont you contact viper performance.. he is excellent.. good clean work ... cost effective... as the power gains are concerned
	() Thanks

12th September 2006, 19:18	#231
elf BANNED Join Date: Jan 2005 Location: Bombay Posts: 1,039 Thanked: 13 Times View My Garage	@vikram_d: I'd like to second what team_dragstar says... Just installed my free-flow on my Lancer from ViperPerformance & am really happy. http://www.team-bhp.com/forum/vbpicg...?do=view&g=281) Gave him a damn tough brief - want no sound / vibration in the cabin upto 3000RPM, & post that, want only a little bit of sound on the outside, with no resonance in the cabin whatsoever. He's also said that I should use the car after installation & figure out exactly the kind of tuning that I wanted for 7-10 days, & that he'd rectify any issues I had, if existent. So far, it's been about 6 days & am really happy, (Note that I'm a pain in the butt type of customer!) As regards the other exhaust 'specialist' often mentioned on this forum, I've heard enough negative remarks about their material quality & fabrication. However, am not taking names as I don't want to slander anyone without firsthand experience. My advice - stick with Viper. PM me or him for details.
	() Thanks

14th September 2006, 10:32	#234
vikram_d Senior - BHPian Join Date: Jul 2006 Location: Bangalore Posts: 2,427 Thanked: 1,185 Times	I have PM'ed psycho. But no reply as yet. Will wait and see. I already have all the raw materials i need to make a Free flow in SS. All i need is the expertise. What are people's opinion about Fazil of FRK Racing in Bangalore. I heard from a few people that he is also very good. Vikram
	() Thanks

14th September 2006, 21:49	#235
angad777 Newbie Join Date: May 2006 Location: Gurgaon Posts: 15 Thanked: 0 Times	My free flow for Ikon 1.3 from Viper Performance Got my Custom made free flow exhaust installed on my Ikon 1.3 Flair a few days back. You cant believe the change in the experience of my josh Machine. The power delivery has become instant and like a SBK the pikup doest wait a second, the more i accelerate the instant the acceleration. And oh my god the SOUND!!!!! I opted for the Medium sound for my exhaust and to my pleasure its Very exact the way i wanted it to be. here's a sound sample: http://www.speedyshare.com/647339188.html
	() Thanks

14th September 2006, 21:58	#236
Rudra Sen Team-BHP Support Join Date: Apr 2004 Location: Bangalore Posts: 11,590 Thanked: 6,531 Times View My Garage	Note from the support team: Thread merged.
	() Thanks

15th September 2006, 06:21	#237
heavy_foot Senior - BHPian Join Date: Jun 2004 Location: Navi Mumbai Posts: 1,048 Thanked: 163 Times	hey just downloaded that audio clip...nice growl ..can you post a picture of end can/muffler.
	() Thanks

16th September 2006, 10:28	#238
angad777 Newbie Join Date: May 2006 Location: Gurgaon Posts: 15 Thanked: 0 Times	The Muffler and Exhaust Pics More pics: http://flickr.com/photos/myikon
	() Thanks

16th September 2006, 13:02	#239
grvanand BHPian Join Date: Jul 2006 Location: Bangalore Posts: 211 Thanked: 0 Times	Guys i called one Mr. [FONT=Arial]Abdul Khalick in Bangalore and he quoted me Rs. 10,500/ for full exhaust system for my 1998 Carb Zen. Please give me your thoughts on this and share your experiences if anyone have installed it recently on a carb Zen. [/FONT]
	() Thanks