[ram_hyundai]

a good set of alloys and a FFE would do the trick,avoid vinyl jobs as it may look cheap at times and body kits for wagon r makes it more boxy.you can add on a performance filter like the green cotton too.that would be sufficient for a neat job.if you are keen then the grill can be changed to a meshed one.
ram

[jerish666]

If you get a nice body kits then it will be fine like Ram said if it is not good then car looks more boxy.You can go for Green cotton Wind.

[youngbloodz]

what basic performance mods can be done to a wagonR? have anyone done it?plz post the pics if possible.

[omatunto]

I will have to change the set of tyres that have done more than 50000kms now on my wagonR. I am planning to go for the tubeless this time. Can you folks suggest or give me the specs for this? I am looking at more broader tyres this time for looks. Sorry for the short notice. I need this info before I go to the dealer this Saturday after noon.

[rjstyles69]

Originally Posted by omatunto

I will have to change the set of tyres that have done more than 50000kms now on my wagonR. I am planning to go for the tubeless this time. Can you folks suggest or give me the specs for this? I am looking at more broader tyres this time for looks. Sorry for the short notice. I need this info before I go to the dealer this Saturday after noon.

PM fellow member shajufx for details and maybe you can check his gallery here .
Are you looking at only upgrading the tyres and retain the stock rims or alloys + tyres ?

[nikibusa]

Good to see you here Santosh. Well as far as Wagon-R mods are concerned i think there were pics of a Black Widebody TC floating in some thread. Mods can you have them here please. Also Santosh can you do a small favour of uploading some good pics of your decent ICE install. I am sure members would like it, so will it be of good help in this thread.

[omatunto]

Originally Posted by rjstyles69

PM fellow member shajufx for details and maybe you can check his gallery here .
Are you looking at only upgrading the tyres and retain the stock rims or alloys + tyres ?

Hey RJStyle69, Thanks for the update. I am not going for the alloys. I guess the "Bridgestone potenza GIII, 165/60 R13" looks good. Any idea how much this costs? Also please let me know the alloys cost?

[mridul]

Originally Posted by dinoo82

Hello Friends,
I own a Palio Stile and the BHP is just 57. It almost cries when I want to Pull it in the highways. Overtaking is a bit issue as well.
Can K N filtes increase the BHP of the car. I can compromise on the milegae a bit. Please guys help me with the reliabilithy of K N filters.

The best you can do is go in for FFE with headers which should give u a good bump in power with balanced back pressure..An Air Filter would only give better breathing and if the volume of air is high the ECM balances the fuel ratio too...K & N filters are reliable and works well..Get a Universal Filter job done with intake piping in mild steel or Aluminium ( Though its expensive)...After installation of the Air Filter disconnect the battery supply & connect it again so that the ECM programs & adjusts to the new installations.. as u would be running high revs due to FFE, use Synthetic which would take care of the engine...The problem with STILE is a small engine in a heavy body. Anyway good luck with your mods

[badboyscad]

@ zubair_razack: please post some good quality daylight pics(front, back, side and diagonal view) of your ride..

[badboyscad]

how about getting a bodykit(bumpers and skirts) similar to that of the Chevrolet MV:

[badboyscad]

here, i've photoshopped the chevy MV's front bumper grille and skirt on "shajufx"'s wagon-r:

[badboyscad]

added MV's headlamps to the wagon-r, now:

[badboyscad]

Or, you can even consider the bodykit on the "Wagon-R RR":

[badboyscad]

some more of wagon-r RR:

[Akshay1234]

good stuff badboys.. wagon r-rr