Carbon Fibre Sheets / Self Adhesive Sheets / Stickers

rajismine · 9th August 2010, 16:56

check post no 122 and 123 on this page. Davis is the guy in Hyderabad from MAuto who supplies these

Rajeev

S2!!! · 8th December 2012, 16:00

The Lamborghini Gallardo Superleggera is the sole reason why I have fallen in love with carbon fibre treatment to different parts of a car. Since a long time I tried to source parts for my humble hatchback but the costing did not seem to be in accordance with my willingness to spend. Hence, did a few calls and ended up with the result as seen below. Mind you this is not a vinyl treatment. Will post the interior pics of the centre console later along with the cf spoiler that I will add soon.

Pancham · 8th December 2012, 16:18

Quote:

Originally Posted by S2!!!

. Mind you this is not a vinyl treatment.

You mean this is the real stuff, that is, real carbon fiber?

Can you share the details please?

S2!!! · 28th June 2013, 00:28

Quote:

Originally Posted by Pancham

You mean this is the real stuff, that is, real carbon fiber?

Can you share the details please?

Really sorry for the extremely late reply but I always thought that I had updated this thread for some reason. This is a water based cubic printing technique. Actually a friend is in the coating industry and just for kicks I asked him to experiment carbon fibre printing on a few parts of my car and we were extremely satisfied with the result we achieved.

Unlike vinyl this is a permanent process i.e. once the part is dipped/ worked upon, it can only go back to a stock form if it is repainted.

To give you a glimpse of the entire process please check out this video I found on youtube.

http://www.youtube.com/watch?v=2vSbeKZu1Vw

BraveArc · 3rd July 2013, 09:17

Guys I'm planning on putting the Indian tri-colour onto my family's Evoque. Just wanted to know if it looks good.
Edited the below image on MS paint to get a fair idea but I'm still undecided.
Please share your views.

Twinn · 3rd July 2013, 10:56

Quote:

Originally Posted by BraveArc

Guys I'm planning on putting the Indian tri-colour onto my family's Evoque. Just wanted to know if it looks good.
Edited the below image on MS paint to get a fair idea but I'm still undecided.
Please share your views.

Hey it really looks cool man!!! Do go for it, but make sure you get the right colors, and a bit more aligned with the lines of the body

Tazzy Boy · 3rd July 2013, 12:20

Quote:

Originally Posted by S2!!!

Really sorry for the extremely late reply but I always thought that I had updated this thread for some reason. This is a water based cubic printing technique. Actually a friend is in the coating industry and just for kicks I asked him to experiment carbon fibre printing on a few parts of my car and we were extremely satisfied with the result we achieved.

Unlike vinyl this is a permanent process i.e. once the part is dipped/ worked upon, it can only go back to a stock form if it is repainted.

To give you a glimpse of the entire process please check out this video I found on Youtube.

http://www.Youtube.com/watch?v=2vSbeKZu1Vw

Could you let me where to get this done ?

SRK · 3rd July 2013, 16:43

Quote:

Originally Posted by S2!!!

Really sorry for the extremely late reply but I always thought that I had updated this thread for some reason. This is a water based cubic printing technique. Actually a friend is in the coating industry and just for kicks I asked him to experiment carbon fibre printing on a few parts of my car and we were extremely satisfied with the result we achieved.

Unlike vinyl this is a permanent process i.e. once the part is dipped/ worked upon, it can only go back to a stock form if it is repainted.

To give you a glimpse of the entire process please check out this video I found on Youtube.

http://www.Youtube.com/watch?v=2vSbeKZu1Vw

Hey S2,
Could you pm your friend's contact details.
Interested in this hydro dipping stuff.

S2!!! · 4th July 2013, 00:24

Got it done from a friend who currently does not undertake job work as he is primarily into OEMs but is starting a division for taking up independent job work soon and shall let you know the details then.

S2!!! · 4th July 2013, 22:52

Attaching 2 more (low quality) pictures of the cf work done inside the car along with the remaining bits.

Satshan · 5th July 2013, 09:49

That looks really nice! How much did it cost you for the exterior and interior changes?

moodswings · 27th July 2013, 15:22

Re: Pics: Carbon Fiber Seat - How it was handmade for FSAE
Hi,
I am in the process of starting a Cf and CFRP products and automotive parts manufacturing unit in gurgaon. We have been doing sampling for over 3 weeks now and have been doing it using different resin systems. The coming week we will be starting to make parts by Resin infusion. Till now we have used wet layup and Vacuum bagging. Our goal is to be up and running commercially by 25 th of September. As, of now anyone who is offering to make custom automotive parts in india are way too expensive as there is no one to regulate costs, no real competition. If anyone has questions get in touch with me. We will also be offering starter kits with guides. Also, we plan to release a self help video every fortnight for education. Guys please let me know if you have any suggestions or questions etc. I will post some pics of my Magnum which has some CF parts. We are also, in talks with a few major players of raw CF in India who weave. However, in India there are only 3 weaves available which are twill, plain and Satin and some so, we are also getting some other weaves from US which just look spectacular. Watch this space or if the moderators want to put this as a new thread please let me know. As we are starting up the first lot of parts will be on request.

Regards.
__________________
Only Vintage Cars
Last edited by moodswings : 27th July 2013 at 00:09. Reason: More info

HarneetBarmy · 6th September 2013, 23:39

Hi Moodswings,
Kindly share your contact details i would like to discuss a few things.
Cheers
Harneet

Dee_aRe_Cee · 17th November 2013, 12:07

does anyone know where I could buy a small quantity of CF to test? would like to test before trying to make a mold for a bigger part.

HarneetBarmy · 24th November 2013, 12:48

Quote:

Originally Posted by Dee_aRe_Cee

does anyone know where I could buy a small quantity of CF to test? would like to test before trying to make a mold for a bigger part.

Hey Dee, I recently took help from Moodswings, Aka Preet Singh ji. He made two carbon fiber center console for my Merc Dashboard. He is very helpful person & would strongly recomend getting it done by him. Making something by yourself would not give you finishing. It would be better to get it made by an expert. You can send him an msg.

Cheers
Harneet

9th August 2010, 16:56	#136
rajismine BHPian Join Date: Sep 2006 Location: Hyderabad Posts: 539 Thanked: 280 Times View My Garage	check post no 122 and 123 on this page. Davis is the guy in Hyderabad from MAuto who supplies these Rajeev
	() Thanks

8th December 2012, 16:00	#137
S2!!! Senior - BHPian Join Date: Mar 2008 Location: Mumbai Posts: 1,918 Thanked: 10,064 Times	Re: PICS : Carbon fibre (vinyl sticker) bonnet for the Ford Figo and Wagon R The Lamborghini Gallardo Superleggera is the sole reason why I have fallen in love with carbon fibre treatment to different parts of a car. Since a long time I tried to source parts for my humble hatchback but the costing did not seem to be in accordance with my willingness to spend. Hence, did a few calls and ended up with the result as seen below. Mind you this is not a vinyl treatment. Will post the interior pics of the centre console later along with the cf spoiler that I will add soon. Attached Thumbnails Last edited by S2!!! : 8th December 2012 at 16:02.
	(3) Thanks

3rd July 2013, 09:17	#140
BraveArc BHPian Join Date: Jun 2013 Location: Sydney Posts: 190 Thanked: 558 Times View My Garage	Re: Carbon Fibre Sheets / Self Adhesive Sheets / Stickers Guys I'm planning on putting the Indian tri-colour onto my family's Evoque. Just wanted to know if it looks good. Edited the below image on MS paint to get a fair idea but I'm still undecided. Please share your views. Attached Thumbnails
	() Thanks

4th July 2013, 00:24	#144
S2!!! Senior - BHPian Join Date: Mar 2008 Location: Mumbai Posts: 1,918 Thanked: 10,064 Times	Got it done from a friend who currently does not undertake job work as he is primarily into OEMs but is starting a division for taking up independent job work soon and shall let you know the details then. Last edited by Rehaan : 31st October 2014 at 15:58.
	(1) Thanks

4th July 2013, 22:52	#145
S2!!! Senior - BHPian Join Date: Mar 2008 Location: Mumbai Posts: 1,918 Thanked: 10,064 Times	Re: Carbon Fibre Sheets / Self Adhesive Sheets / Stickers Attaching 2 more (low quality) pictures of the cf work done inside the car along with the remaining bits. Attached Thumbnails
	(2) Thanks

5th July 2013, 09:49	#146
Satshan BHPian Join Date: May 2013 Location: Pune Posts: 185 Thanked: 300 Times	Re: Carbon Fibre Sheets / Self Adhesive Sheets / Stickers That looks really nice! How much did it cost you for the exterior and interior changes?
	() Thanks

27th July 2013, 15:22	#147
moodswings BHPian Join Date: Aug 2005 Location: Gurgaon Posts: 205 Thanked: 10 Times	Re: Carbon Fibre Sheets / Self Adhesive Sheets / Stickers Re: Pics: Carbon Fiber Seat - How it was handmade for FSAE Hi, I am in the process of starting a Cf and CFRP products and automotive parts manufacturing unit in gurgaon. We have been doing sampling for over 3 weeks now and have been doing it using different resin systems. The coming week we will be starting to make parts by Resin infusion. Till now we have used wet layup and Vacuum bagging. Our goal is to be up and running commercially by 25 th of September. As, of now anyone who is offering to make custom automotive parts in india are way too expensive as there is no one to regulate costs, no real competition. If anyone has questions get in touch with me. We will also be offering starter kits with guides. Also, we plan to release a self help video every fortnight for education. Guys please let me know if you have any suggestions or questions etc. I will post some pics of my Magnum which has some CF parts. We are also, in talks with a few major players of raw CF in India who weave. However, in India there are only 3 weaves available which are twill, plain and Satin and some so, we are also getting some other weaves from US which just look spectacular. Watch this space or if the moderators want to put this as a new thread please let me know. As we are starting up the first lot of parts will be on request. Regards. __________________ Only Vintage Cars Last edited by moodswings : 27th July 2013 at 00:09. Reason: More info
	(2) Thanks

6th September 2013, 23:39	#148
HarneetBarmy BHPian Join Date: Feb 2010 Location: New Delhi\Gurga Posts: 68 Thanked: 12 Times View My Garage	Re: Carbon Fibre Sheets / Self Adhesive Sheets / Stickers Hi Moodswings, Kindly share your contact details i would like to discuss a few things. Cheers Harneet
	() Thanks

17th November 2013, 12:07	#149
Dee_aRe_Cee BHPian Join Date: Apr 2013 Location: Goa Posts: 137 Thanked: 340 Times	Re: Carbon Fibre Sheets / Self Adhesive Sheets / Stickers does anyone know where I could buy a small quantity of CF to test? would like to test before trying to make a mold for a bigger part.
	() Thanks