4x2x1 Headers with a Custom End Can

IronWolf · 20th May 2008, 01:06

Finally got Headers done for my Baleno. Its a 4x2x1 done at SAG by Psycho and Vasu Anna. (adding a pic of Vasu anna's TC Zen

Dont ask me when it "kicks in". All I know is its free flowing and the humm is addictive.

Its exactly what I wanted. Quiet till about 2250 rpm and quite loud after that.

End can is also as I dreamed it to be (looks and sound wise).

Have been doing this quite often off late :
Hold throttle 30-40% till rpms reach about 3500, then floor it to the redline. Damm feel like going for a spin now.

Thanks again Psycho!

manikjeet · 20th May 2008, 01:17

Bro how much did it cost and how long did it take to install

IronWolf · 20th May 2008, 01:29

It took 3 days to install. Pricing depends on the materials used. Have PMed you.

v1p3r · 20th May 2008, 02:31

Lookin' good, Danny boy! Nice pics of the end can, in all its solitary glory.

How about some pics of the headers and exhaust on the car? Did you opt for the chrome ones? Will we be privileged to see the car this Sunday?

swift8847 · 20th May 2008, 04:30

Hey congrats. Great setup.

Please post the exhaust note. Would love to hear it. And could you PM me the total cost of the setup with the installation.

ramie2400 · 20th May 2008, 11:25

congrats Ironwolf,the endcan looks soo cool man,please post a Sound-clip of your car and some pics also with the end-can installed cheers drive safe

rjstyles69 · 20th May 2008, 12:18

Congrats Danny boy. So addictive is the word eh

? Drive safe and post an audio clip of the exhaust note.

n_aditya · 20th May 2008, 12:59

Congrats on the performance exhaust IW. Have you got the headers chrome plated? Awesome looking end can. Have fun.

Shan2nu · 20th May 2008, 13:54

Quote:

Have you got the headers chrome plated?

Even i want to get my headers chrome painted. Will any chrome paint do, or is there a special mixture that needs to be used to withstand the extreme heat?

Shan2nu

Psycho · 20th May 2008, 14:14

Quote:

Originally Posted by Shan2nu

Even i want to get my headers chrome painted. Will any chrome paint do, or is there a special mixture that needs to be used to withstand the extreme heat?

Shan2nu

Hey Shan2nu he said chrome plated not painted.

Shan2nu · 20th May 2008, 15:05

Quote:

Hey Shan2nu he said chrome plated not painted.

Oh ok, but what chrome plating method is usually used or will anything do?

Shan2nu

IronWolf · 20th May 2008, 19:33

Guys all costing queries I feel should go to Psycho as it would depend on the job you are looking at and the car as well.

I don't want to mislead with the price I paid. All I can say is its VFM

Quote:

Originally Posted by swift8847

Hey congrats. Great setup.

Please post the exhaust note. Would love to hear it. And could you PM me the total cost of the setup with the installation.

I will put up some vids / or sound clips over the weekend.

Quote:

Originally Posted by v1p3r

Lookin' good, Danny boy! Nice pics of the end can, in all its solitary glory.

How about some pics of the headers and exhaust on the car? Did you opt for the chrome ones? Will we be privileged to see the car this Sunday?

Thanks V1p3r.. wont be coming for the drive this time. Will try to take some pics this Saturday.

Quote:

Originally Posted by rjstyles69

Congrats Danny boy. So addictive is the word eh

? Drive safe and post an audio clip of the exhaust note.

"Addicted to that Rush" - Mr Big

Quote:

Originally Posted by n_aditya

Congrats on the performance exhaust IW. Have you got the headers chrome plated? Awesome looking end can. Have fun.

Not plated the headers for cost factors and have the stock heat shield modded and covering the headers.

NOS Power · 20th May 2008, 21:18

great job dude. could you confirm the price of that setup?

PatienceWins · 20th May 2008, 22:26

Congrats friend. The end can looks great. I am waiting for my warranty period to be over.

saravanan2603 · 21st May 2008, 15:31

Dear BHPians,

I have a Swift LXi, for which I would like to change the mufflers alone, like the one similar to Ironwolf's, I just wanna change the sound to a rocking noise. On the other hand not interested in headers/free flows etc to increase performance as I dont wanna compromise on my FE.

Can somebody tell me a reliable place where I can get this job done in Chennai. Also pls. let me know what would be the approx cost for this kinda job.

20th May 2008, 01:06	#1
IronWolf Senior - BHPian Join Date: Jun 2007 Location: Benga-loo-ru Posts: 1,569 Thanked: 45 Times View My Garage	4x2x1 Headers with a Custom End Can Finally got Headers done for my Baleno. Its a 4x2x1 done at SAG by Psycho and Vasu Anna. (adding a pic of Vasu anna's TC Zen Dont ask me when it "kicks in". All I know is its free flowing and the humm is addictive. Its exactly what I wanted. Quiet till about 2250 rpm and quite loud after that. End can is also as I dreamed it to be (looks and sound wise). Have been doing this quite often off late : Hold throttle 30-40% till rpms reach about 3500, then floor it to the redline. Damm feel like going for a spin now. Thanks again Psycho! Attached Thumbnails
	(1) Thanks

20th May 2008, 01:17	#2
manikjeet Senior - BHPian Join Date: Sep 2006 Location: chandigarh Posts: 1,618 Thanked: 295 Times View My Garage	Bro how much did it cost and how long did it take to install
	() Thanks

20th May 2008, 01:29	#3
IronWolf Senior - BHPian Join Date: Jun 2007 Location: Benga-loo-ru Posts: 1,569 Thanked: 45 Times View My Garage	It took 3 days to install. Pricing depends on the materials used. Have PMed you.
	() Thanks

20th May 2008, 02:31	#4
v1p3r Senior - BHPian Join Date: Feb 2005 Location: BLR / DXB / LON Posts: 5,334 Thanked: 6,896 Times View My Garage	Lookin' good, Danny boy! Nice pics of the end can, in all its solitary glory. How about some pics of the headers and exhaust on the car? Did you opt for the chrome ones? Will we be privileged to see the car this Sunday?
	() Thanks

20th May 2008, 04:30	#5
swift8847 BHPian Join Date: Aug 2007 Location: Bangalore/Houston Posts: 324 Thanked: 2 Times	Hey congrats. Great setup. Please post the exhaust note. Would love to hear it. And could you PM me the total cost of the setup with the installation.
	() Thanks

20th May 2008, 11:25	#6
ramie2400 Senior - BHPian Join Date: Nov 2006 Location: Mumbai Posts: 1,903 Thanked: 66 Times View My Garage	congrats Ironwolf,the endcan looks soo cool man,please post a Sound-clip of your car and some pics also with the end-can installed cheers drive safe
	() Thanks

20th May 2008, 12:18	#7
rjstyles69 Senior - BHPian Join Date: Sep 2006 Location: Bengalooru.. Posts: 4,343 Thanked: 842 Times View My Garage	Congrats Danny boy. So addictive is the word eh ? Drive safe and post an audio clip of the exhaust note.
	() Thanks

20th May 2008, 12:59	#8
n_aditya Senior - BHPian Join Date: Oct 2005 Location: Namma Bengaluru Posts: 5,348 Thanked: 3,684 Times View My Garage	Congrats on the performance exhaust IW. Have you got the headers chrome plated? Awesome looking end can. Have fun.
	() Thanks

20th May 2008, 21:18	#13
NOS Power BHPian Join Date: Jun 2004 Location: Kolkata Posts: 404 Thanked: 79 Times View My Garage	great job dude. could you confirm the price of that setup?
	() Thanks

20th May 2008, 22:26	#14
PatienceWins Senior - BHPian Join Date: May 2007 Location: Bangalore Posts: 2,416 Thanked: 807 Times View My Garage	Congrats friend. The end can looks great. I am waiting for my warranty period to be over.
	() Thanks

21st May 2008, 15:31	#15
saravanan2603 Newbie Join Date: Dec 2007 Location: Chennai Posts: 5 Thanked: 0 Times	Dear BHPians, I have a Swift LXi, for which I would like to change the mufflers alone, like the one similar to Ironwolf's, I just wanna change the sound to a rocking noise. On the other hand not interested in headers/free flows etc to increase performance as I dont wanna compromise on my FE. Can somebody tell me a reliable place where I can get this job done in Chennai. Also pls. let me know what would be the approx cost for this kinda job.
	() Thanks