modified ikon by n1enginnering..

mclaren1885 · 5th August 2005, 14:02

here is an info of the car modded by n
1engineering..along with pics..

Fork IKON 1.6L Petrol Rocam Engine

Duration: 5 months

Work Carried out by N1 Racing

• Complete body kit – bumpers, spoiler, hood, running board, fenders

• High Lift Cam from PIPER – BP270

• Head polishing, porting and facing

• Free flow 4x2x2 exhaust system from Magnaflow

• MSD ignition system

• Denso Iridium spark plugs

• KNN air filter – EXTREME series

• FSE Power boost Valve

• N1 Racing Short shift Gear Lever

• Mr. Gasket Open exhausts system

• MOMO pedals and steering wheel

• Sun Automobile voltage stabilizer

• NOS 05130 kit (+75bhp)

• APC Racing Seats

• N1 Racing wing spoiler

• AutoTecknic LED Bulbs

• KYB Coil over Gas Suspension

OUTPUT (tested on GTECH)
STOCK NOW
POWER 91bhp POWER 100bhp +75 with NOS
TOP SPEED 190 kmph TOP SPEED 200 kmph
0-100 13 seconds 0-100 11 seconds

mclaren1885 · 5th August 2005, 14:16

here are the pics
URL=http://img149.imageshack.us/my.php?image=car13ei.jpg]

[/url]

islero · 5th August 2005, 14:18

Looks fantastic, if a little loud with all that silver and bright blue. I want one!!

mclaren1885 · 5th August 2005, 14:22

all tht work and just 10bhp increase in power xcludin the nos tht is..and top speed increase only by 10kmph..is tht all u can get out of a ikon after doing all these mods..looks like something is wrong with the fig..bcoz how can there be so less increase in power and top speed after porting,free flow,k&n filter,irridium spark plugs etc..must have costed tht guy a bomb...is it worth payin tht much for such a slight increase..he could have fitted nos alone without any engine mods and still have arrived tht top speed..pls comment...

turbo_lover · 5th August 2005, 16:01

Quote:

N1 Racing Short shift Gear Lever

- you mean a short throw ?

Quote:

• Free flow 4x2x2 exhaust system from Magnaflow

Quote:

•Mr. Gasket Open exhausts system

you mean the Headers ? how can one car have 2 different exhaust systems ?

and whats with those stupid gauges ??
the car has 2 speedo meters ? the main one is in MPH ?haha
the seperate fuel gauge which reads under 40 litres and the cars original fuel gauge reads almost empty ? *** ???
we should have this car on the Ricer Boy website ..

skirting and the bumperwork is good ...hood sucks.

@mclaren - dude you have pics of the engine bay ?

Gordon · 5th August 2005, 16:13

Have some pictures of this car when it didn't have the rear spoiler and front grille. The number plate was previously in the front vent of the front bumper, its now shifted about the vent. A little more stickers here and there have been added.

Whose car is it anyways, mclaren1885?
Where is n1enginnering located?? Never heard of it.

mclaren1885 · 5th August 2005, 16:26

no idea guys and dont have the engine bay pics..found this on their website www.n1engineering.com... they are supposed to be performance stockists but have no idea where they are located..check out their site if u want..ya seriously all those tachs and meters really have spoiled the look of the dash..and guys wht about the performance fig..chk those out...after all those mods hardly any differrence..

turbo_lover · 5th August 2005, 16:33

we did have the ikons pics on the site...

hey,
was the amby on the site the same one at the Speed run this year?
both the Ikon and the Amby seem to have the same set of mods ..
amby - 0-100 is in 13 secs ! thats crazy though man ...
the carb amby was 82 bhp as stock ?

what is this "SHORT SHIFT GEAR LEVER" man ?
- short throw shifter on a close ratio gearbox ?

mclaren1885 · 5th August 2005, 16:48

ya thts correct they have modded an amby too..next in their mods is a 1.3L zen atleast thts wht i heard..check out the short shift gear level in this pic..thts wht they are talking about just a short gear lever(correct me if im wrong).

turbo_lover · 5th August 2005, 16:54

Looks uncomfortable to me man ..
the gear lever should be as close to the steering wheel as possible to increase reaction time and reduce chances of mis-shifts...
i think that way - the lancer has a well placed gear lever ,perfect height and distance for me ..

iceman91 · 5th August 2005, 16:58

lots of things do not add up dude and have been pointed out earlier in a thread about this car.......those mods appear a waste of money if giving only 9bhp boost....can get 9bhp difference in thta car for less than 15k

mclaren1885 · 5th August 2005, 17:01

me too thought the same turbo...hope ur in a state of panic and the last thing u wud want to do is keep an eye on the happenings on the road and on the other hand try to locate this ultra short gear lever as its not tht short conventionally..wat if u cant find it in the sniff of time...whhhhhaaaaaaacckkkkk..seriously wudnt recommend this mod on any car...

Gordon · 5th August 2005, 17:47

Registered Office Address:
62, Dadar Silver Beach, Plot 1159/60,
Off Cadell Road, Jhambekar Marg,
Dadar west, Mumbai 400028.
INDIA

Contact Numbers (Mumbai):
Anant Pithawalla (0091) 9821221791
Mustafa Kachwalla (0091) 9819704494
Siddharth Patil (0091) 9892118532

Other Contact Details:
Technical queries - tech@n1engineering.com
Sales Related queries - sales@n1engineering.com
For bulk/wholesale orders - corporate@n1engineering.com
General/Website related queries - info@N1engineering.com

ananthkamath · 5th August 2005, 17:55

Quote:

Originally Posted by turbo_lover

hey,
was the amby on the site the same one at the Speed run this year?

I think it was - He dragged with a Octavia RS and even kept up with it until half-track...

gkrishn · 5th August 2005, 18:00

Both seat occupy every inch of space available from pillar to pillar. Looks like it kind of got stuffed into that place. And it will leave no elbow room when shifting the gear...crazy people.

5th August 2005, 14:02	#1
mclaren1885 BANNED Join Date: Jul 2005 Location: Bangalore (the city of modded cars) !! Posts: 4,820 Thanked: 45 Times View My Garage Infractions: 0/1 (10)	modified ikon by n1enginnering.. here is an info of the car modded by n 1engineering..along with pics.. Fork IKON 1.6L Petrol Rocam Engine Duration: 5 months Work Carried out by N1 Racing • Complete body kit – bumpers, spoiler, hood, running board, fenders • High Lift Cam from PIPER – BP270 • Head polishing, porting and facing • Free flow 4x2x2 exhaust system from Magnaflow • MSD ignition system • Denso Iridium spark plugs • KNN air filter – EXTREME series • FSE Power boost Valve • N1 Racing Short shift Gear Lever • Mr. Gasket Open exhausts system • MOMO pedals and steering wheel • Sun Automobile voltage stabilizer • NOS 05130 kit (+75bhp) • APC Racing Seats • N1 Racing wing spoiler • AutoTecknic LED Bulbs • KYB Coil over Gas Suspension OUTPUT (tested on GTECH) STOCK NOW POWER 91bhp POWER 100bhp +75 with NOS TOP SPEED 190 kmph TOP SPEED 200 kmph 0-100 13 seconds 0-100 11 seconds
	() Thanks

5th August 2005, 14:16	#2
mclaren1885 BANNED Join Date: Jul 2005 Location: Bangalore (the city of modded cars) !! Posts: 4,820 Thanked: 45 Times View My Garage Infractions: 0/1 (10)	here are the pics URL=http://img149.imageshack.us/my.php?image=car13ei.jpg][/url]
	() Thanks

5th August 2005, 14:18	#3
islero Senior - BHPian Join Date: Dec 2004 Location: Chennai Posts: 1,574 Thanked: 13 Times View My Garage	Looks fantastic, if a little loud with all that silver and bright blue. I want one!!
	() Thanks

5th August 2005, 14:22	#4
mclaren1885 BANNED Join Date: Jul 2005 Location: Bangalore (the city of modded cars) !! Posts: 4,820 Thanked: 45 Times View My Garage Infractions: 0/1 (10)	all tht work and just 10bhp increase in power xcludin the nos tht is..and top speed increase only by 10kmph..is tht all u can get out of a ikon after doing all these mods..looks like something is wrong with the fig..bcoz how can there be so less increase in power and top speed after porting,free flow,k&n filter,irridium spark plugs etc..must have costed tht guy a bomb...is it worth payin tht much for such a slight increase..he could have fitted nos alone without any engine mods and still have arrived tht top speed..pls comment...
	() Thanks

5th August 2005, 16:13	#6
Gordon Senior - BHPian Join Date: Feb 2004 Location: Mumbai Posts: 2,546 Thanked: 483 Times View My Garage	Have some pictures of this car when it didn't have the rear spoiler and front grille. The number plate was previously in the front vent of the front bumper, its now shifted about the vent. A little more stickers here and there have been added. Whose car is it anyways, mclaren1885? Where is n1enginnering located?? Never heard of it. Last edited by Gordon : 5th August 2005 at 16:17.
	() Thanks

5th August 2005, 16:26	#7
mclaren1885 BANNED Join Date: Jul 2005 Location: Bangalore (the city of modded cars) !! Posts: 4,820 Thanked: 45 Times View My Garage Infractions: 0/1 (10)	no idea guys and dont have the engine bay pics..found this on their website www.n1engineering.com... they are supposed to be performance stockists but have no idea where they are located..check out their site if u want..ya seriously all those tachs and meters really have spoiled the look of the dash..and guys wht about the performance fig..chk those out...after all those mods hardly any differrence..
	() Thanks

5th August 2005, 16:33	#8
turbo_lover Senior - BHPian Join Date: Dec 2004 Location: Toronto Posts: 1,377 Thanked: 9 Times	we did have the ikons pics on the site... hey, was the amby on the site the same one at the Speed run this year? both the Ikon and the Amby seem to have the same set of mods .. amby - 0-100 is in 13 secs ! thats crazy though man ... the carb amby was 82 bhp as stock ? what is this "SHORT SHIFT GEAR LEVER" man ? - short throw shifter on a close ratio gearbox ?
	() Thanks

5th August 2005, 16:48	#9
mclaren1885 BANNED Join Date: Jul 2005 Location: Bangalore (the city of modded cars) !! Posts: 4,820 Thanked: 45 Times View My Garage Infractions: 0/1 (10)	ya thts correct they have modded an amby too..next in their mods is a 1.3L zen atleast thts wht i heard..check out the short shift gear level in this pic..thts wht they are talking about just a short gear lever(correct me if im wrong).
	() Thanks

5th August 2005, 16:54	#10
turbo_lover Senior - BHPian Join Date: Dec 2004 Location: Toronto Posts: 1,377 Thanked: 9 Times	Looks uncomfortable to me man .. the gear lever should be as close to the steering wheel as possible to increase reaction time and reduce chances of mis-shifts... i think that way - the lancer has a well placed gear lever ,perfect height and distance for me ..
	() Thanks

5th August 2005, 16:58	#11
iceman91 Senior - BHPian Join Date: Nov 2004 Location: melbourne/banga Posts: 1,961 Thanked: 34 Times View My Garage	lots of things do not add up dude and have been pointed out earlier in a thread about this car.......those mods appear a waste of money if giving only 9bhp boost....can get 9bhp difference in thta car for less than 15k
	() Thanks

5th August 2005, 17:01	#12
mclaren1885 BANNED Join Date: Jul 2005 Location: Bangalore (the city of modded cars) !! Posts: 4,820 Thanked: 45 Times View My Garage Infractions: 0/1 (10)	me too thought the same turbo...hope ur in a state of panic and the last thing u wud want to do is keep an eye on the happenings on the road and on the other hand try to locate this ultra short gear lever as its not tht short conventionally..wat if u cant find it in the sniff of time...whhhhhaaaaaaacckkkkk..seriously wudnt recommend this mod on any car...
	() Thanks

5th August 2005, 17:47	#13
Gordon Senior - BHPian Join Date: Feb 2004 Location: Mumbai Posts: 2,546 Thanked: 483 Times View My Garage	Registered Office Address: 62, Dadar Silver Beach, Plot 1159/60, Off Cadell Road, Jhambekar Marg, Dadar west, Mumbai 400028. INDIA Contact Numbers (Mumbai): Anant Pithawalla (0091) 9821221791 Mustafa Kachwalla (0091) 9819704494 Siddharth Patil (0091) 9892118532 Other Contact Details: Technical queries - tech@n1engineering.com Sales Related queries - sales@n1engineering.com For bulk/wholesale orders - corporate@n1engineering.com General/Website related queries - info@N1engineering.com
	() Thanks

5th August 2005, 18:00	#15
gkrishn BHPian Join Date: Aug 2004 Location: Bangalore Posts: 626 Thanked: 93 Times View My Garage	Both seat occupy every inch of space available from pillar to pillar. Looks like it kind of got stuffed into that place. And it will leave no elbow room when shifting the gear...crazy people.
	() Thanks