Swift K-series dyno run. Only 55 BHP?

pranavt · 7th January 2011, 15:12

Why is there no graph, no spreadsheet, absolutely nothing?

Ricky_63 · 7th January 2011, 21:16

Swift 1.3 does about 65 Whp. After the turbo it is in the range of about 120 Whp. What say ?? So one can imagine what a Turbo Swift runs like !! Tsk tsk

Someone said it costing a bomb to TC a Swift. You are so damn right. Priorities my friend - it is all about whether or not you wanna dole out $$$$$ on a measly Swift !!

Cheers

kailashnj · 7th January 2011, 22:33

Its normal for car to loose anything between 15% to 20% on the wheel but the figure that you are quoting is too high. This brings some questions in my mind

1. How many runs did you do on the Dyno
2. If more than one run then is 55 the best figure or the worst
3. Where are the Dyno graphs as that will help understand many things

hope to see the dyno graphs soon

crazydiablo · 8th January 2011, 18:14

Its correct on the RRR dyno. I believe this has been discussed on the multiple dyno runs posts here.

Sankar · 15th January 2011, 17:30

Quote:

Originally Posted by Sankar

Do update us after you get headers installed, eagerly awaiting the results.
Would love to see the 55BHP graph along with the after headers graph. Please post them.

prasanna_gem, are there any updates to update this thread. I read on the swift exhaust header thread that the RRP upgrade on your car was completed. Did you get the car dynoed after the mods and could you share the results here?

prasanna_gem · 17th February 2011, 00:55

Everyone has been asking for the Dyno details, here you go .
I am not really good at interpreting it.
Also it became complex with output mention in (At Wheels)

7th January 2011, 15:12	#16
pranavt Senior - BHPian Join Date: May 2008 Location: Mumbai Posts: 1,682 Thanked: 641 Times View My Garage	Re: Swift K-series dyno run. Only 55 BHP? Why is there no graph, no spreadsheet, absolutely nothing?
	() Thanks

7th January 2011, 21:16	#17
Ricky_63 Senior - BHPian Join Date: Dec 2006 Location: Gurgaon Posts: 3,885 Thanked: 518 Times View My Garage	Re: Swift K-series dyno run. Only 55 BHP? Swift 1.3 does about 65 Whp. After the turbo it is in the range of about 120 Whp. What say ?? So one can imagine what a Turbo Swift runs like !! Tsk tsk Someone said it costing a bomb to TC a Swift. You are so damn right. Priorities my friend - it is all about whether or not you wanna dole out $$$$$ on a measly Swift !! Cheers
	() Thanks

7th January 2011, 22:33	#18
kailashnj BHPian Join Date: Oct 2006 Location: Mumbai Posts: 958 Thanked: 375 Times	Re: Swift K-series dyno run. Only 55 BHP? Its normal for car to loose anything between 15% to 20% on the wheel but the figure that you are quoting is too high. This brings some questions in my mind 1. How many runs did you do on the Dyno 2. If more than one run then is 55 the best figure or the worst 3. Where are the Dyno graphs as that will help understand many things hope to see the dyno graphs soon
	() Thanks

8th January 2011, 18:14	#19
crazydiablo BHPian Join Date: May 2004 Location: Bangalore/San Francisco Posts: 854 Thanked: 24 Times View My Garage	Re: Swift K-series dyno run. Only 55 BHP? Its correct on the RRR dyno. I believe this has been discussed on the multiple dyno runs posts here.
	() Thanks

17th February 2011, 00:55	#21
prasanna_gem BHPian Join Date: Mar 2008 Location: Hyderabad Posts: 26 Thanked: Once	Re: Swift K-series dyno run. Only 55 BHP? Everyone has been asking for the Dyno details, here you go . I am not really good at interpreting it. Also it became complex with output mention in (At Wheels) Attached Thumbnails
	(1) Thanks