Kawasaki Eliminator

luv_bikelover · 18th March 2006, 22:53

i own an eliminator and i wanna modify it its a cruiser ,so tell me what mods i should go for, tell me performance mods also

,and tell me which kinda helmet i should buy,tell the name n helmet type,r and is it that to get eliminator parts nowadays in the showrooms is a big long deal comments needed to make my eliminator live its a purple colour one!!!!!!!what effect has avenger done on the owners of eliminator .

does it really matters be it an avenger or the eliminator

v12 · 18th March 2006, 23:11

The introduction of the Avenger at a lower price has definitely affected the resale value of the Eliminator. And of course it does matter whether its an Eliminator or an Avenger. The Eliminator had a Kawasaki engine whereas the Avenger has a Pulsar engine. The Eliminator has much better quality than the Avenger.

Regarding modifications to make it look like an actual cruiser, you could try saddlebags, windshield, a wider handlebar (RD handlebar), front fork-bags.

jakesride · 4th May 2006, 13:07

hey guys ,
dont see any posts about avengers or eliminators anymore . . . or im a looking in the wrong place . . someone guide me through please . .
anyways . . .hope everybody is doing good . . .
im plannin to do a " little" moddin to my ride . . with the no of avengers gettin road space these days , wanna stay ahead !
was gonna do a lil body stickering , wanna put in a windshield , get a higher handlebar and stuff like that . . any of you got any good ideas, let me know please . .
will post later
jake

zulfikar · 5th May 2006, 14:40

just wanted to know
after Avenger is been interduced in the markit...
whats the resail value for Eliminators...
i am thinking of selling my RX135 and buy one eleminator...

nosfreak · 5th May 2006, 21:51

Eliminator, i still perfer this rather than Avenger, U can try puttin some saddle bags, a smaller handle bar , whtever costemics u wanna do.
For performance

Fit a K&N air Filter, Jet up the bike, drop a teeth ot two in the rear sprocket for top end.

Try Porting it, in means shaving the head, nigger valves.... A perfromance exhaust, most probaly a proton should do. BRW :- how old is ur bike?

zulfikar · 31st December 2006, 21:54

Hi Guys,
i Bought a Eliminator last evening.
its a 2002 Model done 20K in Black Colour...with Fancy Number...
i am happy with it...
wanted to get it serviced....
I live in Bangalore (BTM)...
wanted to know were i can get it serviced...
should i take it to Bajaj Service Center or some other place...
Please let me know were to take it...
planning to give it on Wed or thursday coming week...

PS: Also Please let me know if K&N is avelable for Eliminator.
if yes were i can get it and howmuch will it bee...

Nikhilb2008 · 31st December 2006, 22:09

Quote:

Originally Posted by zulfikar

Hi Guys,
i Bought a Eliminator last evening.
its a 2002 Model done 20K in Black Colour...with Fancy Number...
i am happy with it...
wanted to get it serviced....
I live in Bangalore (BTM)...
wanted to know were i can get it serviced...
should i take it to Bajaj Service Center or some other place...
Please let me know were to take it...
planning to give it on Wed or thursday coming week...

PS: Also Please let me know if K&N is avelable for Eliminator.
if yes were i can get it and howmuch will it bee...

I would suggest the nearest Castrol Bike Zone. Very professional service. I loved it.

jkdas · 31st December 2006, 22:45

zulfikar; congrats on your buy. we ought to meet one day.
there's a new castrol centre near jc road

zulfikar · 1st January 2007, 01:08

thanks guys,
any one near BTM like Kormangalla or jaya nagar...

zulfikar · 1st January 2007, 01:11

Jkdas we can meet when ever ur free...
i work from 11 - 8PM weekdays so weekends should not be any issues...

zulfikar · 2nd January 2007, 17:05

guys any Castrol Bike Zone near BTM< Kormangala.

gr8guzzler · 2nd January 2007, 21:41

Zulfi...here's a list of Castrol Bikezone Centers in Bangalore

zulfikar · 3rd January 2007, 01:21

gr8guzzler thanks a lot...

will go and check today...

nosfreak · 4th January 2007, 01:16

k& n Air Filter RC 1060. cost is bout 2100/- ( not really sure) but its near 2100. and castrol will do the fitting and jetting job for you.

Try laying ur hands on a uni filter instead.

zulfikar · 4th January 2007, 15:54

nosfreak,
thanks for the info...
how much is the UNI filter for...
i am coming to Hyd tomorrow...
can you tell me were i can get one in HYD...

and whats the difference between K&N and UNI filter is it just the Brand name or something else too...

18th March 2006, 22:53	#1
luv_bikelover BHPian Join Date: Feb 2006 Location: MUMBAI Posts: 45 Thanked: 0 Times	Kawasaki Eliminator i own an eliminator and i wanna modify it its a cruiser ,so tell me what mods i should go for, tell me performance mods also ,and tell me which kinda helmet i should buy,tell the name n helmet type,r and is it that to get eliminator parts nowadays in the showrooms is a big long deal comments needed to make my eliminator live its a purple colour one!!!!!!!what effect has avenger done on the owners of eliminator . does it really matters be it an avenger or the eliminator
	() Thanks

18th March 2006, 23:11	#2
v12 Distinguished - BHPian Join Date: Feb 2004 Location: Mumbai Posts: 6,739 Thanked: 7,213 Times View My Garage	The introduction of the Avenger at a lower price has definitely affected the resale value of the Eliminator. And of course it does matter whether its an Eliminator or an Avenger. The Eliminator had a Kawasaki engine whereas the Avenger has a Pulsar engine. The Eliminator has much better quality than the Avenger. Regarding modifications to make it look like an actual cruiser, you could try saddlebags, windshield, a wider handlebar (RD handlebar), front fork-bags.
	() Thanks

4th May 2006, 13:07	#3
jakesride BHPian Join Date: Apr 2006 Location: Hyderabad Posts: 50 Thanked: 0 Times	hey guys , dont see any posts about avengers or eliminators anymore . . . or im a looking in the wrong place . . someone guide me through please . . anyways . . .hope everybody is doing good . . . im plannin to do a " little" moddin to my ride . . with the no of avengers gettin road space these days , wanna stay ahead ! was gonna do a lil body stickering , wanna put in a windshield , get a higher handlebar and stuff like that . . any of you got any good ideas, let me know please . . will post later jake
	() Thanks

5th May 2006, 14:40	#4
zulfikar BHPian Join Date: Feb 2005 Location: Hyderabad Posts: 532 Thanked: 18 Times View My Garage	just wanted to know after Avenger is been interduced in the markit... whats the resail value for Eliminators... i am thinking of selling my RX135 and buy one eleminator...
	() Thanks

5th May 2006, 21:51	#5
nosfreak BHPian Join Date: Mar 2006 Location: Hyd Posts: 265 Thanked: 28 Times View My Garage	Eliminator, i still perfer this rather than Avenger, U can try puttin some saddle bags, a smaller handle bar , whtever costemics u wanna do. For performance Fit a K&N air Filter, Jet up the bike, drop a teeth ot two in the rear sprocket for top end. Try Porting it, in means shaving the head, nigger valves.... A perfromance exhaust, most probaly a proton should do. BRW :- how old is ur bike?
	() Thanks

31st December 2006, 21:54	#6
zulfikar BHPian Join Date: Feb 2005 Location: Hyderabad Posts: 532 Thanked: 18 Times View My Garage	Bought myself A Eliminator Hi Guys, i Bought a Eliminator last evening. its a 2002 Model done 20K in Black Colour...with Fancy Number... i am happy with it... wanted to get it serviced.... I live in Bangalore (BTM)... wanted to know were i can get it serviced... should i take it to Bajaj Service Center or some other place... Please let me know were to take it... planning to give it on Wed or thursday coming week... PS: Also Please let me know if K&N is avelable for Eliminator. if yes were i can get it and howmuch will it bee... Last edited by zulfikar : 31st December 2006 at 21:56.
	() Thanks

31st December 2006, 22:45	#8
jkdas Senior - BHPian Join Date: Sep 2005 Location: Thiruvananthapu Posts: 9,687 Thanked: 1,492 Times View My Garage	zulfikar; congrats on your buy. we ought to meet one day. there's a new castrol centre near jc road
	() Thanks

1st January 2007, 01:08	#9
zulfikar BHPian Join Date: Feb 2005 Location: Hyderabad Posts: 532 Thanked: 18 Times View My Garage	thanks guys, any one near BTM like Kormangalla or jaya nagar...
	() Thanks

1st January 2007, 01:11	#10
zulfikar BHPian Join Date: Feb 2005 Location: Hyderabad Posts: 532 Thanked: 18 Times View My Garage	Jkdas we can meet when ever ur free... i work from 11 - 8PM weekdays so weekends should not be any issues...
	() Thanks

2nd January 2007, 17:05	#11
zulfikar BHPian Join Date: Feb 2005 Location: Hyderabad Posts: 532 Thanked: 18 Times View My Garage	guys any Castrol Bike Zone near BTM< Kormangala.
	() Thanks

2nd January 2007, 21:41	#12
gr8guzzler BHPian Join Date: Apr 2005 Location: Navi Mumbai Posts: 653 Thanked: 87 Times View My Garage	Zulfi...here's a list of Castrol Bikezone Centers in Bangalore
	() Thanks

3rd January 2007, 01:21	#13
zulfikar BHPian Join Date: Feb 2005 Location: Hyderabad Posts: 532 Thanked: 18 Times View My Garage	gr8guzzler thanks a lot... will go and check today...
	() Thanks

4th January 2007, 01:16	#14
nosfreak BHPian Join Date: Mar 2006 Location: Hyd Posts: 265 Thanked: 28 Times View My Garage	k& n Air Filter RC 1060. cost is bout 2100/- ( not really sure) but its near 2100. and castrol will do the fitting and jetting job for you. Try laying ur hands on a uni filter instead.
	() Thanks

4th January 2007, 15:54	#15
zulfikar BHPian Join Date: Feb 2005 Location: Hyderabad Posts: 532 Thanked: 18 Times View My Garage	nosfreak, thanks for the info... how much is the UNI filter for... i am coming to Hyd tomorrow... can you tell me were i can get one in HYD... and whats the difference between K&N and UNI filter is it just the Brand name or something else too...
	() Thanks