[TusharK]

Royal Enfield is said to be developing a new model based on the J-platform. A document detailing the brand’s future products lists a 350cc Bobber.



According to media reports, the new 350cc Bobber will be based on the Classic 350. The silhouette shown in the document suggests that the bike will feature a round headlamp with raised handlebars, a teardrop-shaped fuel tank and a single seat.

The upcoming Bobber is likely to be powered by a 349cc, single-cylinder engine. In the Classic 350, this engine develops 20 BHP and 27 Nm and is paired with a 5-speed gearbox.

It has been reported that Royal Enfield is working on a 650cc Himalayan. Reports suggest that the brand’s first EV would also be an ADV.

Source: Bikewale

Link to Team-BHP News

[TusharK]

Royal Enfield Classic 350 Bobber with white wall tyres spied

It seems Royal Enfield is looking to raise the retro quotient of the upcoming Classic 350 Bobber. The latest spy image reveals several details that point towards this.



The Classic 350 Bobber test mule was seen sporting white wall tyres over wire-spoke rims. The bike also had a single seat with raised handlebars, a single-pod tail lamp and a low-slung exhaust.

The Classic 350 Bobber is expected to be based on the J-platform. It could be powered by the familiar 349cc, single-cylinder engine as the Classic 350. This engine develops 20 BHP and 27 Nm and is paired with a 5-speed gearbox.

The test bike was equipped with a conventional suspension setup with a telescopic fork at the front and dual shock absorbers at the rear. The bike also had disc brakes at both ends and is likely to get dual-channel ABS.

Source: Rushlane

Link to Team-BHP News

[aviator1101]

Some new pics of the RE Bobber 350 test mules have been shared by Motorbeam







Also, a video of the same has been posted on YouTube.

https://youtu.be/hPuFv7QhA_k

[TusharK]

Royal Enfield Goan Classic 350 name trademarked

Royal Enfield has filed a trademark application for the ‘Goan Classic 350’ nametag.



The Goan Classic 350 name could be used for its upcoming Classic 350 Bobber. Test mules of the bike have already been spotted testing.

The 350cc Bobber is expected to be based on the J-platform. Spy images have revealed a classic bobber design offering a relaxed riding position and wire-spoke wheels shod with white wall tyres.

It could be powered by the familiar 349cc single-cylinder engine as the Classic 350. This engine develops 20 BHP and 27 Nm and is paired with a 5-speed gearbox.

The test bike was equipped with a conventional suspension setup with a telescopic fork at the front and dual shock absorbers at the rear. The bike also had disc brakes at both ends and is likely to get dual-channel ABS.

Source: Rushlane

Link to Team-BHP News