[Mr.Boss]

Originally Posted by Williams_f1

A quick update, an opportunity has come to pick up a very less used I-2 block, running on the standard size piston without requiring any boring, just bolt on. I saw the block myself and was as described, the other option is to pick up G1 block which will be bored to .5 and then fitted.

Cost wise, I- 2 is turning out to be 1k more expensive than the G1, that is I-2 is 4.5k and G1 is 3.5k.

Just an information for fellow RX fans and owners.
OE Cylinder kits won't be supplied any further. Have a look at the official announcement from Yamaha India.


So when you find any old stock, be it G or I or ABCD what ever the series it may be, stock it.

[Mr.Boss]

Restored a couple of days back



Details here

[svpatra]

Originally Posted by Mr.Boss

Restored a couple of days back


Details here

Mr Boss ji,

One word awesome,

For some reason, the stance of the bike has changed. The possible reason could be height of rear shock absorbers and position of the handlebar OR could be the angle of the camera. Please clear my confusion.

One more suggestion, please decrease the distance between the headlight and speedmeter console.

[Mr.Boss]

Originally Posted by svpatra

Mr Boss ji,

One word awesome

Thank you

Originally Posted by svpatra

For some reason, the stance of the bike has changed. The possible reason could be height of rear shock absorbers and position of the handlebar OR could be the angle of the camera. Please clear my confusion.

It's the rear shocks height (taller by an inch) and the camera angle making the stance a bit awkward. Let me post a clear snap by this evening.

Originally Posted by svpatra

One more suggestion, please decrease the distance between the headlight and speedmeter console.

You mean the height? Since I'm using center lock from RXZ, speedo bracket needs some modification to lower the position.

[SunnyBoi]

Went out for some bank work, took a long detour through a hill back home Awesome weather today!

[Starscream1188]

Got a Few things done on the bike:
New Bore .5mm, New chamber exhaust and a few cosmetics additions like a new headlamp assy, centre lock etc.,

[ScorpWarp]

Here is mine, except the odo everything else is just fine even after 20 years, including the original chrome

[Horizon]

Originally Posted by Raccoon

Are you sure its manufactured in 2007 and not just imported in 2007?

Its not at all easy to make out if its working just fine! If the oil starts breaking down, it will provide poorer lubrication which may not be immediately apparent, but can reduce engine life... and may also cause other problems. Generally, shelf life is said to be 4 years max... so better to be on the safer side.

Hello @raccoon. I was looking for some help regarding my modified yamaha rx 100 and somehow i landed here. Please forgive me if this is not the appropriate way to seek help, but i am somehow not able to send private messages.
Well, I need some help regarding carb tuning and oil leak issues that i have tried and failed to sort after numerous attempts. I am in Pune and would like to talk to you about this. Please revert if you can help me here. Im Kshitij Bongale and you may also reach me at kshitijsmail at gmail.

[pramodkumar]

Originally Posted by Horizon

Hello @raccoon. I was looking for some help regarding my modified yamaha rx 100 and somehow i landed here. Please forgive me if this is not the appropriate way to seek help, but i am somehow not able to send private messages.
Well, I need some help regarding carb tuning and oil leak issues that i have tried and failed to sort after numerous attempts. I am in Pune and would like to talk to you about this. Please revert if you can help me here. Im Kshitij Bongale and you may also reach me at kshitijsmail at gmail.

Most of the things are covered in the Thread Here (Yamaha RX Series Bikes : DIY Video Tutorials)

You can also see them in the youtube link in my signature.

Pramod

[Horizon]

Originally Posted by pramodkumar

Most of the things are covered in the Thread Here (Yamaha RX Series Bikes : DIY Video Tutorials)

You can also see them in the Youtube link in my signature.

Pramod

Thank you Pramod ji. I liked the videos, but still need personal help in Pune. Would be greatfull if anybody could help me out in seeking contact details for @raccoon. Or anybody with sound knowledge about 2 strokes.

[Mr.Boss]

Recent snap

[jomson13]

Originally Posted by Horizon

Thank you Pramod ji. I liked the videos, but still need personal help in Pune. Would be greatfull if anybody could help me out in seeking contact details for @raccoon. Or anybody with sound knowledge about 2 strokes.

Hi there,

I am based in pune. Lets connect and take this forward.
I have a good mechanic who has been maintaining my RX for the last 10 years - hopefully he should be able to help you out.
Drop me a DM with your contact details and I will get back to you.
Cheers.

[Horizon]

Originally Posted by jomson13

Hi there,

I am based in pune. Lets connect and take this forward.
I have a good mechanic who has been maintaining my RX for the last 10 years - hopefully he should be able to help you out.
Drop me a DM with your contact details and I will get back to you.
Cheers.

Hi,
Thank you for the concern. It seems I ma not yet authorized to DM.
Would be thankful if you could please ping me on whats app.
Regards,
Kshitij Bongale
7709268007
kshitijsmail@gmail.com
@you_thought_this_guy

[Mr.Boss]

Recent snap of red candy

[pramodkumar]

Looks like you really love that angle to take pics.

BTW the bike looks extreamly lick-able


I was free for an hour yesterday night and not really sleepy. so, decided to rebuild an engine





Need to get a work bench as well.

Pramod