My Rxz 5 Speed

malcolm · 21st August 2005, 23:29

guyz i have a yamaha rxz5speed its modded it even does a 140KPh but i need to make it even faster so pls suggest any moddes that can be done pls post

mclaren1885 · 22nd August 2005, 00:22

get a k&n performance air filter fitted to ur bike dude...will give u a better growl and the pickup will increase..even ur fe might go up slightly(not that it matters looking at ur bike)...could u pls elaborate on the exhaust u have..

adya33 · 22nd August 2005, 00:48

first of all get proper safety gear atleast the helmet

BTW welcoem to team BHP

Mpower · 22nd August 2005, 05:56

List out what mods you have. If its not ported, thats the first thing you need..then U can open up the bore.

dragger · 22nd August 2005, 06:39

hey the exhaust that he has is common sight on all rx's...its a proton also called the booster and many other common names..well it does make a bit of a difference...the manifold remaining stock the pipe is changed till the tail end...its a ready made after market upgrade...very very common...must say the bike is very well mainted...i had a close look...you still dont even have a power box...and as fellow tbhpian's said head porting..piston polishing...would help a lot...since its a 5 speed already you cant upgrade the gear system...well the k&n filter would also make a noticable difference...use a good spark plug and ignition wire...tried and tested...that's all that comes to my mind with this bike...anyways nice ride...!!..cheers...!!

ananthkamath · 22nd August 2005, 10:27

Quote:

Originally Posted by dragger

you still dont even have a power box...and as fellow tbhpian's said head porting..piston polishing...would help a lot...since its a 5 speed already you cant upgrade the gear system...well the k&n filter would also make a noticable difference...use a good spark plug and ignition wire...tried and tested..

He does have a powerbox..that thick pipe you see leading upwards from the manifold with the steel sheath around it leads to the powerbox...it came as stock on all the 135s...Head porting and piston polishing will never give any significant gains on a 2-stroke. Because you can't 'port' a 2-stroke head: the ports are in the cylinder block.

If you are really touching 140 kph then it would be tough to improve on that. Thats already very good. I am guessing your bike is already ported. How many revs are you pulling in top gear at that speed?

The Proton is a generic pipe (otherwise known as expansion chamber) that's mass-produced. Whereas you would need one that's specifically suited to the porting in your bike. You need to go to a pipe specialist for this. After all the work is done you need to go for larger carbs: typically 28mm (RD350) will work very well on the RX.

Ananth

malcolm · 22nd August 2005, 16:23

Quote:

Originally Posted by mclaren1885

get a k&n performance air filter fitted to ur bike dude...will give u a better growl and the pickup will increase..even ur fe might go up slightly(not that it matters looking at ur bike)...could u pls elaborate on the exhaust u have..

well thx for the suggestion i already have bought it
have 2 fit it though
and its a proton silencer made in madras specially for rxz 5speed
ported bikes

malcolm · 22nd August 2005, 16:28

i also have ordered aluminium piston and connecting rod as well as bearings from malaysia will be here in some time
its the racing stuff they use there in the rxz 6speeds hope it rocks
caz those bikes there touch a 160+ with these as the aluminum parts dont heat up fast and if they do heat cool off fast
also i just got a monster cables which doesnt let the current leak when it travels from the coil to the spark plugs

Tom · 30th August 2005, 11:26

140kph true speed? sounds neat. hope u reach 160kph someday.
obtw..... the tvs factory shaolin drag bikes dont do more than 150kph.

ananthkamath · 31st August 2005, 10:02

Quote:

Originally Posted by Tom

obtw..... the tvs factory shaolin drag bikes dont do more than 150kph.

They dont need to, their terminal speed of 150 kph is good for an ET well into the 13s...

malcolm · 2nd September 2005, 08:53

yup they are fast will race em in the next drag hehehe

ScarySkulls · 18th September 2005, 10:38

140kmph eh...???
Wow, it should sure feel like a rush....

On second note, ever felt wut a true 140 feels like...???

Anyways, it totally beats me as to how u can touch 140 without any port reshaping or with those ultra crap dubbas that u call chambers.
Also, I couldn't see any CDI change posted by you.
If u are running the stock CDI, then it makes your 140 claim even more dubious.

ScarySkulls · 18th September 2005, 10:41

Quote:

Originally Posted by malcolm

and its a proton silencer made in madras specially for rxz 5speed
ported bikes

Looks like proton guys market their products very well.
They know how they can fool the regular public.

ScarySkulls · 18th September 2005, 10:44

Quote:

Originally Posted by malcolm

i also have ordered aluminium piston and connecting rod as well as bearings from malaysia will be here in some time
its the racing stuff they use there in the rxz 6speeds hope it rocks
caz those bikes there touch a 160+ with these as the aluminum parts dont heat up fast and if they do heat cool off fast
also i just got a monster cables which doesnt let the current leak when it travels from the coil to the spark plugs

Please keep us poor guys updated on this exciting mod.

Looks like the results willbe a real eye opener for you atleast...

devarshi84 · 18th September 2005, 23:24

I dunno y yamaha discontinued it. It was the best looking performance bike in their stable. they should have given it a better rear tyre and it had the potentiel to earn some good sales for yamaha. Half the people dont even know that such a yamaha existed.

21st August 2005, 23:29	#1
malcolm BHPian Join Date: Aug 2005 Location: m Posts: 78 Thanked: 5 Times	My Rxz 5 Speed guyz i have a yamaha rxz5speed its modded it even does a 140KPh but i need to make it even faster so pls suggest any moddes that can be done pls post
	() Thanks

22nd August 2005, 00:22	#2
mclaren1885 BANNED Join Date: Jul 2005 Location: Bangalore (the city of modded cars) !! Posts: 4,820 Thanked: 45 Times View My Garage Infractions: 0/1 (10)	get a k&n performance air filter fitted to ur bike dude...will give u a better growl and the pickup will increase..even ur fe might go up slightly(not that it matters looking at ur bike)...could u pls elaborate on the exhaust u have..
	() Thanks

22nd August 2005, 00:48	#3
adya33 Senior - BHPian Join Date: Apr 2005 Location: Pune Posts: 1,839 Thanked: 183 Times	first of all get proper safety gear atleast the helmet BTW welcoem to team BHP
	() Thanks

22nd August 2005, 05:56	#4
Mpower Senior - BHPian Join Date: Mar 2005 Location: Bangalore Posts: 10,409 Thanked: 1,730 Times View My Garage	List out what mods you have. If its not ported, thats the first thing you need..then U can open up the bore.
	() Thanks

22nd August 2005, 06:39	#5
dragger BHPian Join Date: Nov 2004 Location: India-Mumbai-Colaba Posts: 350 Thanked: 6 Times	hey the exhaust that he has is common sight on all rx's...its a proton also called the booster and many other common names..well it does make a bit of a difference...the manifold remaining stock the pipe is changed till the tail end...its a ready made after market upgrade...very very common...must say the bike is very well mainted...i had a close look...you still dont even have a power box...and as fellow tbhpian's said head porting..piston polishing...would help a lot...since its a 5 speed already you cant upgrade the gear system...well the k&n filter would also make a noticable difference...use a good spark plug and ignition wire...tried and tested...that's all that comes to my mind with this bike...anyways nice ride...!!..cheers...!! Last edited by dragger : 22nd August 2005 at 06:43. Reason: Spell Check
	() Thanks

22nd August 2005, 16:28	#8
malcolm BHPian Join Date: Aug 2005 Location: m Posts: 78 Thanked: 5 Times	thx for int i also have ordered aluminium piston and connecting rod as well as bearings from malaysia will be here in some time its the racing stuff they use there in the rxz 6speeds hope it rocks caz those bikes there touch a 160+ with these as the aluminum parts dont heat up fast and if they do heat cool off fast also i just got a monster cables which doesnt let the current leak when it travels from the coil to the spark plugs
	() Thanks

30th August 2005, 11:26	#9
Tom BHPian Join Date: May 2004 Location: Bangalore, India. Posts: 401 Thanked: 0 Times	140kph true speed? sounds neat. hope u reach 160kph someday. obtw..... the tvs factory shaolin drag bikes dont do more than 150kph.
	() Thanks

2nd September 2005, 08:53	#11
malcolm BHPian Join Date: Aug 2005 Location: m Posts: 78 Thanked: 5 Times	yup they are fast will race em in the next drag hehehe
	() Thanks

18th September 2005, 10:38	#12
ScarySkulls BHPian Join Date: Mar 2004 Location: Halifax, N.S. Posts: 623 Thanked: 34 Times	140kmph eh...??? Wow, it should sure feel like a rush.... On second note, ever felt wut a true 140 feels like...??? Anyways, it totally beats me as to how u can touch 140 without any port reshaping or with those ultra crap dubbas that u call chambers. Also, I couldn't see any CDI change posted by you. If u are running the stock CDI, then it makes your 140 claim even more dubious.
	() Thanks

18th September 2005, 23:24	#15
devarshi84 Senior - BHPian Join Date: Jun 2005 Location: Ahmedabad - Tor Posts: 4,024 Thanked: 211 Times View My Garage	I dunno y yamaha discontinued it. It was the best looking performance bike in their stable. they should have given it a better rear tyre and it had the potentiel to earn some good sales for yamaha. Half the people dont even know that such a yamaha existed.
	() Thanks