Team-BHP (https://www.team-bhp.com/forum/)

-   Official New Car Reviews (https://www.team-bhp.com/forum/official-new-car-reviews/)

-   -   4th-gen Honda City : Official Review (https://www.team-bhp.com/forum/official-new-car-reviews/145656-4th-gen-honda-city-official-review-78.html)

Very true there was a period in the middle where I had a driver. In that situation the backseat really counts and the City is had to beat. If that were still true the new City would have easily trounced the Vento for me.

That actually is a major issue. I was told the Vento TSI has to be brought in for service every 15,000 kms and that is a relief for someone who stuck to Honda's service schedule. There was a time my car was doing a lot of kms and it went for service 3-4 times a year.

Tell me about it! I got the shock of my life yesterday when I decided to top up the TSI and was presented with a bill for 3,400 bucks! With the City, the max it ever took was 2,800. And that version had a 45 liter tank.

I guess the tank size is a trade off made in favor of the diesel engine.
40L x 12 kmpl = 480 kms [Range for Petrol City/City Driving]
40L x 16 kmpl = 640 kms [Range for Diesel City/City Driving]

So for the Diesel the Range extremely good.

Good point. I don't think anyone would mind much if they have to go to the petrol pump after every 500km. For most people that will be once a week which is quite acceptable considering the easy access to petrol pumps around us.

Agree to your point. However, the 500 kms discussion holds true if it were near to empty. I for one, am in a habit to fill up every time the needle is slightly below the quarter tank level. Which means, I have to fill up each time around 400 +- kms. For my driving which is around 20 kms a day, the full tank up to the quarter level or slightly less, lasts for around little less than 2 weeks. With this, I have to fill up about twice a month or if weekend drives are longer, then thrice a month. This I feel is too often :), although some may disagree. I just feel that if the Honda City had a 50+ liter tank capacity like the VW Vento, there would be fewer gas station trips.

I understand that a big bill of INR 3.4K is lot when compared to INR 2.8K, but look at the positive side, you have to make fewer trips to the gas station, which I think is a big plus.

Sumit, the standard wheel size in the specification is 15x5.5J. Since I bought the new alloys from Honda, i think, it should also follow the same.

I know, that really looks bad. But, I am anyway going for underbody rust protection from 3M car care.:)

I guess its a fair statement for Petrol City buyers, my calculation should have discounted the 5 liters or so that comes under Reserve which would reduce the range further by another 60km (for Petrol)

How much does the underbody rust protection from 3M cost for the City?

Its around 3800 including taxes!

I am also going for the 3m floor mats which are far better than 3d mats and the price quoted is 220/- persft, for Honda City, the cost would be around 6k.

Thanks, I'm going to test drive a Vento TSI with my family seated in the back. If the rear seat is ok for my family, i might well go for Vento only.
But there is no test drive TSI model available. Can only check the space in back and the service costs from the dealer. Sadly no CVT from honda also not available for test drive.

I'm pretty much happy with the back seat of City. But the front seat, during test drive didn't look that comfortable for me (I am just under 6 feet tall). Probably I didnt adjust the seat correctly.

Really confusing. If I'd a higher budget should have gone for the Hyundai Elantra Diesel Automatic.

I booked my Honda City petrol vx last month and expecting delivery around 23rd March.

At the time of booking I too had a confusion between the City, Verna and the Vento. For me the back seat comfort is very important as it would be chauffeur driven with a 60:40 ratio in favor of chauffeur.

The Verna was immediately ruled out due to pathetic back seat comfort. There was a confusion between the city and the Vento. However I chose the city for the following reasons:

• Better back seat comfort in City. I felt the Vento seating to be slightly lower compared to the city and therefore getting in and out was more comfortable in the City.
• Another very important criteria was the A.S.S. This was of utmost importance as I need a car that would be hassle free to maintain. It is not the cost of service that was a bother, it was the availability of parts during emergencies and the honesty of service. For both the points VW did not inspire much confidence as I know a few in my family and friends circle who far not that impressed with the quality of A.S.S. by both VW and Skoda. And with the hectic work schedule did not want to waste too much time behind any of this.
• Also, I believe the Vento comes only with the automatic and there not very successful time with quite a few automatics is well known in India.
• Another important criteria for me was the sunroof which isn't available with the Vento lol:

All the best for your decision!

Need some inputs on Honda Official Reverse Parking Sensor.

I have booked White SV CVT. Honda earlier used to provide body coloured sensors. The person managing the accessory division however mentioned that Honda used to get complaints and so now they are only giving in Black colour reverse sensors. It is prices for about 6.5K.

Having 4 black sensors on white car is something I'm not too keen on. He however mentioned that if I wanted, they could colour the sensors white to match the body colour. However, this would void the warranty as per Honda terms. He mentioned that painting them would not affect the sensitivity of sensors and they should just work fine. Not sure if I should trust his words.

I've been really happy with the sensitivity of Honda official reverse sensors on my brother's earlier generation Honda City but not getting them in body coloured is a bummer

I have 2 options:
- Paint them white and have it installed and hope they continue to work as expected
- Buy after market good sensors. I'm somehow not sure about the quality of after market sensors or which brand to go for here. Also, I believe, holes need to be drilled on bumper to install them and this is something I'm not too sure how the quality of the finish would be after market.

I'm planning to hold off on boot spoiler ( 9.5K ) for now. Can have it installed later as well.

Illuminated scuff plates are tempting. They are exorbitantly priced as noted earlier ( 5.5K )

Check with the accessory guy which brand sensors Honda is providing you. Then you can check its price outside and also get them painted yourself. Also, it sounds absolutely absurd that warranty will be void if they are painted. The honda accessory guy here specifically told me the sensors which they are providing are body colored ones. I saw them installed on a couple of cars in showroom itself which dealer was selling with accessories from him.
Do not go for black only sensors as i have seen them on a white previous generation City and they spoil the back look of the car.

Spoiler can be arranged easily from outside for 4k max. And there is no risk of any warranty void with them as well so i will say get it from outside which is exactly i am going to do with my SV city. Its also White in color.

As for LED scuff plates here dealer is giving them for 5k. However, they can be easily sourced from sites like snapdeal, ebay etc for around 1500. Ftiting can be done DIY or from any accessory shop.

Congratulations on your new Honda City booking. If the new City is giving you a stock reverse camera, do you really need reverse parking sensors? In my opinion it would be good to have but may not be really required in addition to a reverse camera.

Illuminated scuff plates look good. I got them fitted from Honda, when I rolled out my new City around 1.5 years ago. 5.5K including showroom labor, is a expensive I agree, but I think Honda technicians do a good job fitting them, as that's what they do everyday on cars that they are familiar with. If you fit it from outside, make sure the technician is really good & knows what he is doing on a 10L+ car.

Maybe I'm missing something here. How would the under body rust protection take care of the fender wells? I was more thinking in lines of whether it can be painted black or have it covered by some plastic cladding.

Under body rust protection is definable good and something I'm also planning to get it done from 3M.


I've never explored 3M mats or the 3D mats. Is it advisable to not go for the Honda provided mats (Rs 1800) and instead go for 3D or the ones from 3M? The one Honda provides are light beige and though they look nice, I'm sure they'll get dirty pretty soon. I do however like the clip lock they have for driver side mat so it stays in place.

Also, do you have picture of 3M mats? Is it the one posted here: http://www.team-bhp.com/forum/modifi...ct-review.html
They do not look that appealing

If possible, can you check the brand that your dealer is giving and if they are part of Honda official accessory list? I'll try to call my dealer and check on this. Even the Honda City accessory page shows body colored bumpers so was kind of surprised when my dealer told me that it comes only in black.

I'll hold off on the spoiler. For scuff plates, I'm not sure if third party manufacturers have started making for the new City.

Mine is SV CVT variant which does not come with reverse camera installed. I'm not too fond of camera as such and so am planning to go just for sensors.

I think I'll probably go for the scuff plates from the dealer itself. I wish they had illuminated ones for rear panels as well.

Yes, the sensors are part of Honda accessory list. Price is 5400. I will get them from dealer itself as getting them from outside has a huge risk of voiding the warranty.
For LED scuff plates I really want to know if the previous generation City and this one has same dimensions in that area. If it is then the same can be fitted easily. Plus point in getting them from outside is that all 4 doors will get illuminated ones where Honda is giving LED for only front doors. Fitting is easy through the dome light and any good accessory guy can do it.

Spoiler I will wait and try to find a local accessory shop, otherwise I will procure it from the importer and get them fitted here.

Mine is also SV model so do keep me posted whatever modifications you do which will be quite helpful to me and others.
Delivery of my car is in April so near that I will do a complete survey of all accessory shops in Karolbagh and will post my findings here.