[Laks]

Originally Posted by ashesh

Finally! got the delivery of Thar ROXX. Mahindra delivered on the day as promised

Congratulations!! The mud flaps are poor in quality - both fit and finish. I have retained the front ones as without it, the mud / slush splatter on to the front door is too much. The rear ones I fitted and then immediately got it removed as it looks bad. Overall, the look is better without the mud flaps.

[Laks]

Update: For those with lower variants and keen to install Mahindra genuine LED fog lights, please note Mahindra will be releasing a kit comprising of LED fog lights and the wiring harness. I am told this is currently under testing and likely to be released sometime in Jan'25. Until then, it is highly recommended that you don't go the aftermarket route and void the warranty.

[mrkireeti]

Has anyone who booked Mocha interiors variants got indicative delivery timelines?

[iskandariya]

Originally Posted by mrkireeti

Has anyone who booked Mocha interiors variants got indicative delivery timelines?

Nope, I too am waiting for updates.

-----
Separately this is by far the best mod I found on Social media Link By Carobar ludhiana

[lk_gunner]

Originally Posted by Laks

Thanks for sharing. Did you not try to put the "Beauty Hub Cap" like the ones available in the higher variants? I saw on YouTube its only INR 74.

Can you please share the link. I want to put that hub cap.

[peddagunda]

Originally Posted by mrkireeti

Has anyone who booked Mocha interiors variants got indicative delivery timelines?

I have booked AX7L D AT 4X4 with Mocha Interiors and have got email for tentative delivery in March. Again I got an email from the dealer for tentative invoice date as Feb-end. My SA said that I may get it at Feb end. Need to see what happens.

[a023624a]

Friends, when is the 1st service due ? At 1000kms or 2000 kms ? Booklet received with car says 2000, but service center says 1000.
Thanks in advance.

[MyGoRa]

Originally Posted by a023624a

Friends, when is the 1st service due ? At 1000kms or 2000 kms ? Booklet received with car says 2000, but service center says 1000.
Thanks in advance.

I was told it would be at 2k, but it seems more like a post-delivery inspection.

[a023624a]

Originally Posted by MyGoRa

I was told it would be at 2k, but it seems more like a post-delivery inspection.

Yes, first one is mere inspection. But important to be on records for warranty continuation.
Confusion is whether this inspection should be done at 1K or 2K kms

[CU23]

Originally Posted by mrkireeti

Has anyone who booked Mocha interiors variants got indicative delivery timelines?

No communication yet, no mail from M&M as well..!

Originally Posted by peddagunda

I have booked AX7L D AT 4X4 with Mocha Interiors and have got email for tentative delivery in March. Again I got an email from the dealer for tentative invoice date as Feb-end. My SA said that I may get it at Feb end. Need to see what happens.

Which dealer have you booked with?
I have also booked the same in Tango Red. Which colour did you go for?

[peddagunda]

Which dealer have you booked with?
I have also booked the same in Tango Red. Which colour did you go for?

Anant Cars Mysore Road. That's the nearest to my place

[LowRpmHighTorq]

Originally Posted by lk_gunner

Can you please share the link. I want to put that hub cap.

To all the lower variant owners(MX3, MX5 etc), here is the permanent Mahindra's solution for protruding rear camera installation with new spare wheel alloy.

https://www.youtube.com/watch?v=YNp4WhJfgUs

[vellatechie]

Is there a specific model number for the rear door metal rack and the wheel hub cap?

Edit: Is there any update from Mahindra regarding Carplay sw update in MX3?

[peddagunda]

Originally Posted by CU23

Which dealer have you booked with?
I have also booked the same in Tango Red. Which colour did you go for?

Anant Cars Mysore Road. Thats the nearest dealer for me. I booked Battleship Grey with Mocha

[lk_gunner]

Originally Posted by LowRpmHighTorq

To all the lower variant owners(MX3, MX5 etc), here is the permanent Mahindra's solution for protruding rear camera installation with new spare wheel alloy.


https://www.Youtube.com/watch?v=YNp4WhJfgUs

Yes this indeed is the best way out for majority of people. The cutting-welding work that I did may not be most feasible for all. Though it is the most cost effective and doesn't need any additional material procurement.