Pioneer X324

jkdas · 30th March 2006, 14:03

HOw much can I expect from a used Pioneer GM-X324. I am thinking of getting a JBL CS series amp or an Alpine amp by next month end.

Specifications

Continuous Power (20Hz-20kHz, 0.08% THD)
- 4 ch: (4 Ohm) 30Wx4
- 4 ch: (2 Ohm) 35Wx4
- 2 ch: (4 Ohm) 70Wx2
Maximum Power (EIAJ)
- 4 ch: (4 Ohm) 60Wx4
- 2 ch: (4 Ohm) 140Wx2
Frequency Response: 10Hz - 50kHz (0,-1dB)
Total Harmonic Distortion: 0.008% (1kHz, 4 Ohm)
Signal-to-Noise Ratio: 108dB (IHF-A Weighted, at 1kHz)
Dimensions: 8-1/8" x 2" x 10-5/8"

Features

Bridgeable 2/3/4 Channel Capability
High-Current 2 Ohm Operation
PWM MOSFET Power Supply
Balanced Isolator Input Circuit
Screw-Type Power/Ground Terminals
Screw-Type Speaker Terminals
RCA Inputs (x2)
Hi-Volt Input Level Control (400mV-4V)
Selectable Crossover: 80Hz, -18dB/oct. LPF (A Ch.), 80Hz, -12dB/oct. HPF (A,B Ch.)
Bass Boost (60Hz, 0 to +12dB)

jkdas · 1st April 2006, 14:01

bump;

................

zzzehar · 5th April 2006, 02:09

for how much will you see this Amp? I am looking for a good 2nd hand amp.

jkdas · 5th April 2006, 09:19

6k; I am still using it and not sitting at home. Pix on the thread below

panky12345 · 20th April 2006, 02:36

blaupunkt or soundstream?

jkdas · 20th April 2006, 08:54

I exchanged my amp locally for a Pioneer GM6000F.

Mods can you close this thread.

jkdas · 20th April 2006, 10:53

For future reference for Pioneer GM 6000F

Maximum Power Output 100 Watts x 4 or 240 Watts x 2 or 100 Watts x 2 + 240 Watts x 1
Continuous Power Output - Watts RMS @ 14.4V(20 ~ 20kHz into 4 ohms) 50W x 4 (0.08%)
(20 ~ 20kHz into 2 ohms) 60W x 4 (0.8%)
(Bridged into 4 ohms) 120W x 2 @ 12.0V (20 ~ 20kHz into 4 ohms) 50W x 4 (0.08%)
(20 ~ 20kHz into 2 ohms) 60W x 4 (0.8%)
(Bridged into 4 ohms) 120W x 2

Amplifier Dimensions 300 x 61 x 324mm
Mass 5.2kg
Specifications & Features RCA Input (400mV - 6.5Volt) Full Range RCA Output LPF (Low Pass Filter) 40-120Hz, -12dB/oct. for A and B ch.
HPF (High Pass Filter) 40-120Hz, -12dB/oct. for A and B ch.
Frequency Response 10 ~ 50,000 Hz (+0db, -1dB)
Total Harmonic Distortion (THD) < 0.008% (10W / 1kHz)
Signal to Noise (S/N) Ratio > 100dB
Load Impedance per channel 2 ohms ~ 8 ohms
PWM Regulated Power Supply with MOSFET switching
Screw-type power / ground / speaker terminals Gold Plated RCA terminals
High performance balanced isolator circuit
Amplifier Fuse 2 x 20 Amps

navin · 20th April 2006, 12:22

I have locked this thread as the Amp is not sold. Those looking for Speedzak's Blaupunkt amp please look here.

http://www.team-bhp.com/forum/market...mp-4-sale.html

30th March 2006, 14:03	#1
jkdas Senior - BHPian Join Date: Sep 2005 Location: Thiruvananthapu Posts: 9,687 Thanked: 1,492 Times View My Garage	Pioneer X324 HOw much can I expect from a used Pioneer GM-X324. I am thinking of getting a JBL CS series amp or an Alpine amp by next month end. Specifications Continuous Power (20Hz-20kHz, 0.08% THD) 4 ch: (4 Ohm) 30Wx4 4 ch: (2 Ohm) 35Wx4 2 ch: (4 Ohm) 70Wx2 Maximum Power (EIAJ) 4 ch: (4 Ohm) 60Wx4 2 ch: (4 Ohm) 140Wx2 Frequency Response: 10Hz - 50kHz (0,-1dB) Total Harmonic Distortion: 0.008% (1kHz, 4 Ohm) Signal-to-Noise Ratio: 108dB (IHF-A Weighted, at 1kHz) Dimensions: 8-1/8" x 2" x 10-5/8" Features Bridgeable 2/3/4 Channel Capability High-Current 2 Ohm Operation PWM MOSFET Power Supply Balanced Isolator Input Circuit Screw-Type Power/Ground Terminals Screw-Type Speaker Terminals RCA Inputs (x2) Hi-Volt Input Level Control (400mV-4V) Selectable Crossover: 80Hz, -18dB/oct. LPF (A Ch.), 80Hz, -12dB/oct. HPF (A,B Ch.) Bass Boost (60Hz, 0 to +12dB)
	() Thanks

1st April 2006, 14:01	#2
jkdas Senior - BHPian Join Date: Sep 2005 Location: Thiruvananthapu Posts: 9,687 Thanked: 1,492 Times View My Garage	bump; ................
	() Thanks

5th April 2006, 02:09	#3
zzzehar BHPian Join Date: Aug 2005 Location: Gurugram Posts: 277 Thanked: 73 Times	for how much will you see this Amp? I am looking for a good 2nd hand amp.
	() Thanks

5th April 2006, 09:19	#4
jkdas Senior - BHPian Join Date: Sep 2005 Location: Thiruvananthapu Posts: 9,687 Thanked: 1,492 Times View My Garage	6k; I am still using it and not sitting at home. Pix on the thread below
	() Thanks

20th April 2006, 02:36	#5
panky12345 Senior - BHPian Join Date: Mar 2006 Location: New Delhi Posts: 2,697 Thanked: 171 Times	blaupunkt or soundstream?
	() Thanks

20th April 2006, 08:54	#6
jkdas Senior - BHPian Join Date: Sep 2005 Location: Thiruvananthapu Posts: 9,687 Thanked: 1,492 Times View My Garage	I exchanged my amp locally for a Pioneer GM6000F. Mods can you close this thread.
	() Thanks

20th April 2006, 10:53	#7
jkdas Senior - BHPian Join Date: Sep 2005 Location: Thiruvananthapu Posts: 9,687 Thanked: 1,492 Times View My Garage	For future reference for Pioneer GM 6000F Maximum Power Output 100 Watts x 4 or 240 Watts x 2 or 100 Watts x 2 + 240 Watts x 1 Continuous Power Output - Watts RMS @ 14.4V(20 ~ 20kHz into 4 ohms) 50W x 4 (0.08%) (20 ~ 20kHz into 2 ohms) 60W x 4 (0.8%) (Bridged into 4 ohms) 120W x 2 @ 12.0V (20 ~ 20kHz into 4 ohms) 50W x 4 (0.08%) (20 ~ 20kHz into 2 ohms) 60W x 4 (0.8%) (Bridged into 4 ohms) 120W x 2 Amplifier Dimensions 300 x 61 x 324mm Mass 5.2kg Specifications & Features RCA Input (400mV - 6.5Volt) Full Range RCA Output LPF (Low Pass Filter) 40-120Hz, -12dB/oct. for A and B ch. HPF (High Pass Filter) 40-120Hz, -12dB/oct. for A and B ch. Frequency Response 10 ~ 50,000 Hz (+0db, -1dB) Total Harmonic Distortion (THD) < 0.008% (10W / 1kHz) Signal to Noise (S/N) Ratio > 100dB Load Impedance per channel 2 ohms ~ 8 ohms PWM Regulated Power Supply with MOSFET switching Screw-type power / ground / speaker terminals Gold Plated RCA terminals High performance balanced isolator circuit Amplifier Fuse 2 x 20 Amps Last edited by jkdas : 20th April 2006 at 11:03.
	() Thanks

20th April 2006, 12:22	#8
navin Team-BHP Support Join Date: Mar 2004 Location: Mumbai Posts: 25,176 Thanked: 9,264 Times	I have locked this thread as the Amp is not sold. Those looking for Speedzak's Blaupunkt amp please look here. http://www.team-bhp.com/forum/market...mp-4-sale.html
	() Thanks