[nprasan]

Originally Posted by im_srini

This scanner works with my 2-year old K10 - here's the list of parameters for the K10B engine:

Hi Srini,

I own a 2011 model Alto K10 Lxi. Can you tell me where exactly the OBD port is located on the K10?

Regards,
Nikhilesh

[im_srini]

Originally Posted by a4anurag

Does this work for the Ritz (2010 model and later ones) and the New Swift DDiS ?

Hi Anurag,
I'm not sure about the Ritz, but the IN-805 works on my 2010 Alto K10.
I haven't tested it with any of the diesel-engined Marutis I'm afraid...

Originally Posted by nprasan

Hi Srini,
I own a 2011 model Alto K10 Lxi.
Can you tell me where exactly the OBD port is located on the K10?

Hi Nikhilesh,
On the Alto K10 the OBD port is to the right of the wheel & behind the dash. Look behind the dash from beneath it & you'll find the port close to the fuse-box.
On my 13-year-old Alto Vx, the OBD port is at the bottom of the dash & mid-way between the seats (just ahead of the coin-holder / cup-holder).
Let me know if you're unable to find it & I'll post a pic…

[audioholic]

Originally Posted by im_srini

This scanner works with my 2-year old K10 - here's the list of parameters for the K10B engine:

)

Hi,
Could you check if PIDs are available for each of these parameters? It will be helpful in cracking the Maruti protocol for older vehicles. Each parameter that is displayed will have a Hexadecimal PID so if you have access to that please share it with us. I am in need of them.

Also, many parameters in the list you have given are not relevant to the K10B engine at all, such as
15. VVT Gap (deg)
24. Throttle Motor (V)

what is the value displayed for these parameters?

[ravigop]

Can some one who own Autosnap IN 805 / 815 lend me for a week (or sell me for a nominal price) ? i need this to fix some issues in my 2005 swift Zxi.