OBD (On-board diagnostics) for Indian Cars

archat68 · 4th June 2011, 20:55

Quote:

Originally Posted by mtnrajdeep

Thanks archat. I will try to check this.

When I took delivery of the swift in 2008, I noticed stickers on the ECU mentioning Magnetti Marelli. Since it is a FIAT developed engine, only FIAT's component suppliers should be supplying the parts, I guess.

waiting for your update

mayankk · 6th June 2011, 17:41

anybody tried PCMscan software?
its given me the best connectivity so far.
Plus its also got a dyno-test, and DRag thingy as well.
these to require a good long-ish run, and a partner in crime to work the laptop.
I clicked ok for the dyno thing, put the car 1st, 2nd, hit 50, and stopped.
i got a power(HP) reading of 17000 HP!!!
I shall be putting that up soon here!!

apparently you need to calibrate the car to the gear you'll do a 500-600m run in, then run the car upto 50-70 in that gear for a similar length.anything else messes up the readings, to the point that they return junk!
but still, hey, bragging rights!!

dhanushs · 6th June 2011, 19:00

Quote:

Originally Posted by mayankk

... I clicked ok for the dyno thing, put the car 1st, 2nd, hit 50, and stopped.
i got a power(HP) reading of 17000 HP!!! ...

.... apparently you need to calibrate the car to the gear you'll do a 500-600m run in, then run the car upto 50-70 in that gear for a similar length.anything else messes up the readings, to the point that they return junk!
but still, hey, bragging rights!!

OBD power and torque figures are just crap. Caliberate the car and engine size, and you get slightly better crap.

AFAIK, the values are based upon calculations, and not sensors.

flipsyde · 6th June 2011, 21:46

@Kannan - Since you are in Chennai I was wondering if I could check if my 2003 Toyota Corolla accepts a ELM 327 Scanner. I was looking to buy a bluetooth model and hook it up to my android phone. PM me if you think we can meet up and check out if it works with my car. Thanks!

srishiva · 17th June 2011, 12:13

Does anyone know where the OBDII port is situation on a Vento TDI? Have the bluetooth model ready to see if it works.

archat68 · 17th June 2011, 15:55

Connected Scangauge E with my Swift VDi 2008 and tried every tricks - but didn't connect. I was confident after reading the service manual that Swift uses ISO that I bought the SG E from Amazon paying 108$ :( . Lying unused with me (if anybody wants PM me).

Kimified · 23rd June 2011, 20:34

I always wanted to get a OBD Bluetooth scanner. Great to see this thread. If i remember correctly, Another Bhpian JayD had a bluetooth OBD scanner with an Android phone. I think his figo thread still has details on how to connect and get HUD working with the Torque application.

I did a quick Ebay search and found this.

ELM327 BLUETOOTH OBDII OBD2 DIAGNOSTIC SCANNER VAG-COM | eBay

Should work with all OBD2 cars.

My Questions for People who have used it here already.
1. Is paying 3k for this product worth it ? Considering its listed for 50 dollars, The ideal price should be around 2k.

2. Can we get it from Dubai ? One of my cousin is going there next month. If its available for a cheaper price there, maybe ill ask him to get some from there

Kimified · 23rd June 2011, 20:43

I am really sorry for posting the above comment in this thread. I was supposed to post it here.

http://www.team-bhp.com/forum/modifi...ml#post2395215

Mods, Please delete the above post. Thanks and sorry again.

mayankk · 23rd June 2011, 21:12

why do you want to spend 2k or 3k on something thats available for 1300 bucks? get it from DX. $26.03 - OBDII Bluetooth Car Diagnostic Cable - Black + Blue + Orange (DC 12V) - OBD/OBD2 Car Diag. Tools

archat68 · 23rd June 2011, 22:52

Get it from here cheaper -
Ebay.com item no. 300511375540. approx. 18$ with shipping. I paid extra 3$ for shipping through registered airmail. So that comes to 21$ shipped through registered airmail.

Quote:

Originally Posted by mayankk

why do you want to spend 2k or 3k on something thats available for 1300 bucks? get it from DX. $26.03 - OBDII Bluetooth Car Diagnostic Cable - Black + Blue + Orange (DC 12V) - OBD/OBD2 Car Diag. Tools

BlackRaven · 27th June 2011, 10:47

Does anyone know where the OBDII socket is in Mahindra vehicles, especially the Thar? I tried locating but could not.

SPIKE ARRESTOR · 28th June 2011, 08:35

^^ It is located on the RHS above the driver side foot well. It is mounted with the wiper motor mounting bracket using 2 M6 x 1.0 size nuts.

Spike

BlackRaven · 28th June 2011, 10:23

Quote:

Originally Posted by SPIKE ARRESTOR

^^ It is located on the RHS above the driver side foot well. It is mounted with the wiper motor mounting bracket using 2 M6 x 1.0 size nuts.

Spike

Thanks Spike, will try it today.

SPIKE ARRESTOR · 28th June 2011, 11:51

Did not read above posts earlier. Thar does not have OBD-II, it and most other M&M vehicles come with OBD-I.

Attached more useful info on OBD's

Name: 1.jpg
Views: 2527
Size: 206.3 KB

Spike

BlackRaven · 29th June 2011, 09:55

Quote:

Originally Posted by SPIKE ARRESTOR

Did not read above posts earlier. Thar does not have OBD-II, it and most other M&M vehicles come with OBD-I.

Spike

Oh Ok. I was looking for the socket in the driver well for about 15 minutes and thought I was missing something. This explains it. Thanks Spike.

So is the ECU that defines whether the vehicle gets OBD 1 or OBD II or something else?

What does the Scorpio carry OBD I or OBD II?

6th June 2011, 17:41	#272
mayankk Distinguished - BHPian Join Date: Apr 2010 Location: New Delhi Posts: 4,678 Thanked: 5,437 Times View My Garage	re: OBD (On-board diagnostics) for Indian Cars anybody tried PCMscan software? its given me the best connectivity so far. Plus its also got a dyno-test, and DRag thingy as well. these to require a good long-ish run, and a partner in crime to work the laptop. I clicked ok for the dyno thing, put the car 1st, 2nd, hit 50, and stopped. i got a power(HP) reading of 17000 HP!!! I shall be putting that up soon here!! apparently you need to calibrate the car to the gear you'll do a 500-600m run in, then run the car upto 50-70 in that gear for a similar length.anything else messes up the readings, to the point that they return junk! but still, hey, bragging rights!!
	() Thanks

6th June 2011, 21:46	#274
flipsyde BHPian Join Date: Nov 2006 Location: Chennai Posts: 642 Thanked: 73 Times	re: OBD (On-board diagnostics) for Indian Cars @Kannan - Since you are in Chennai I was wondering if I could check if my 2003 Toyota Corolla accepts a ELM 327 Scanner. I was looking to buy a bluetooth model and hook it up to my android phone. PM me if you think we can meet up and check out if it works with my car. Thanks!
	() Thanks

17th June 2011, 12:13	#275
srishiva Senior - BHPian Join Date: Nov 2006 Location: Bengaluru Posts: 4,317 Thanked: 2,069 Times	re: OBD (On-board diagnostics) for Indian Cars Does anyone know where the OBDII port is situation on a Vento TDI? Have the bluetooth model ready to see if it works.
	() Thanks

17th June 2011, 15:55	#276
archat68 BHPian Join Date: Dec 2006 Location: Kolkata Posts: 817 Thanked: 422 Times	re: OBD (On-board diagnostics) for Indian Cars Connected Scangauge E with my Swift VDi 2008 and tried every tricks - but didn't connect. I was confident after reading the service manual that Swift uses ISO that I bought the SG E from Amazon paying 108$ :( . Lying unused with me (if anybody wants PM me).
	() Thanks

23rd June 2011, 20:34	#277
Kimified BHPian Join Date: Mar 2011 Location: Bangalore Posts: 242 Thanked: 80 Times	re: OBD (On-board diagnostics) for Indian Cars I always wanted to get a OBD Bluetooth scanner. Great to see this thread. If i remember correctly, Another Bhpian JayD had a bluetooth OBD scanner with an Android phone. I think his figo thread still has details on how to connect and get HUD working with the Torque application. I did a quick Ebay search and found this. ELM327 BLUETOOTH OBDII OBD2 DIAGNOSTIC SCANNER VAG-COM \| eBay Should work with all OBD2 cars. My Questions for People who have used it here already. 1. Is paying 3k for this product worth it ? Considering its listed for 50 dollars, The ideal price should be around 2k. 2. Can we get it from Dubai ? One of my cousin is going there next month. If its available for a cheaper price there, maybe ill ask him to get some from there
	() Thanks

23rd June 2011, 20:43	#278
Kimified BHPian Join Date: Mar 2011 Location: Bangalore Posts: 242 Thanked: 80 Times	re: OBD (On-board diagnostics) for Indian Cars I am really sorry for posting the above comment in this thread. I was supposed to post it here. http://www.team-bhp.com/forum/modifi...ml#post2395215 Mods, Please delete the above post. Thanks and sorry again.
	() Thanks

23rd June 2011, 21:12	#279
mayankk Distinguished - BHPian Join Date: Apr 2010 Location: New Delhi Posts: 4,678 Thanked: 5,437 Times View My Garage	re: OBD (On-board diagnostics) for Indian Cars why do you want to spend 2k or 3k on something thats available for 1300 bucks? get it from DX. $26.03 - OBDII Bluetooth Car Diagnostic Cable - Black + Blue + Orange (DC 12V) - OBD/OBD2 Car Diag. Tools Last edited by mayankk : 23rd June 2011 at 21:14.
	(1) Thanks

27th June 2011, 10:47	#281
BlackRaven BHPian Join Date: Mar 2008 Location: Bangalore Posts: 186 Thanked: 46 Times	Re: GReddy Informeter Does anyone know where the OBDII socket is in Mahindra vehicles, especially the Thar? I tried locating but could not. Last edited by Rehaan : 30th June 2011 at 13:35. Reason: Splitting post between 2 threads.
	() Thanks

28th June 2011, 08:35	#282
SPIKE ARRESTOR Senior - BHPian Join Date: Nov 2009 Location: Germany Posts: 2,779 Thanked: 1,138 Times	Re: GReddy Informeter ^^ It is located on the RHS above the driver side foot well. It is mounted with the wiper motor mounting bracket using 2 M6 x 1.0 size nuts. Spike
	(2) Thanks

28th June 2011, 11:51	#284
SPIKE ARRESTOR Senior - BHPian Join Date: Nov 2009 Location: Germany Posts: 2,779 Thanked: 1,138 Times	Re: GReddy Informeter Did not read above posts earlier. Thar does not have OBD-II, it and most other M&M vehicles come with OBD-I. Attached more useful info on OBD's Spike Last edited by Rehaan : 30th June 2011 at 13:38. Reason: Splitting post between 2 threads.
	() Thanks

Thread Tools	Search this Thread
	Search this Thread: Advanced Search