OBD (On-board diagnostics) for Indian Cars

vinaydas · 29th January 2009, 00:38

does mahindra vehicles support this (particularly scorpio)

gigy · 28th February 2009, 10:06

Will this work in baleno using Centerfuse 2.0
DealExtreme: $54.67 ELM327 Bluetooth OBD-II Wireless Transceiver Dongle

sdh · 13th March 2009, 08:36

Can some one help me with Swift and ELM Scan 5 (elm 327 chip, 1.3a version firmware).

If I connect it to DLC connector, using the scan terminal, I find that is detects the protocol as ISO 14230. It does not read any sensors, but issuing AT MA dumps data constantly and the vaues change if you press throttle, so I assume some data is coming out of engine. Now question is how to make sense out of it.

dilipkumar7278 · 13th March 2009, 13:51

Hi
I have a scanguage with me which I bought from babishek our fellow team-bhp member.Originally it was meant for lancer but the thing was not compatible with it. I now have a swift diesel, thought this will work but was not meant to be.

.So which all cars does SG work?
Cheers
Dilip

ask77 · 13th March 2009, 23:20

Quote:

Originally Posted by sdh

Can some one help me with Swift and ELM Scan 5 (elm 327 chip, 1.3a version firmware).

If I connect it to DLC connector, using the scan terminal, I find that is detects the protocol as ISO 14230. It does not read any sensors, but issuing AT MA dumps data constantly and the vaues change if you press throttle, so I assume some data is coming out of engine. Now question is how to make sense out of it.

What software are you using to interpret the output of ELM 327 ?

16v100bhp · 14th March 2009, 06:22

I am using these clicky on my audi which I got for 10$ before.

The compatible ross tech software is free for all basic stuff like reading and erasing error codes on all modules. You have to spend a 100 more to go advanced.

sdh · 14th March 2009, 06:53

Quote:

Originally Posted by ask77

What software are you using to interpret the output of ELM 327 ?

scantool.net that came with the elm. Also tried using terminal to communicate with elm to manually send commands.

hrishig · 14th March 2009, 07:34

Anybody have idea about NHC idsi? Is it there ? if yes where it is located.

ask77 · 14th March 2009, 13:06

Try using digimoto . sometime another software can interpret and display the data more accurately so try other softwares there are lots available on the net.

leadf00t · 16th March 2009, 10:51

Does anyone know of a budget scanner for the Mitsubishi MUT3 protocol. From what i read of MUT3 or MUT-III, it is a variation of the ICAN protocol.

Does anyone have any prior experience of using this scanner.

All links on the net points to a 1.5L + scanner with a laptop. sounds useless to me .
Maybe something in the range of max 15k 20K would be better. maybe a cable+software combo that can be loaded to any laptop.

abhi182 · 9th April 2009, 17:36

Am about to order a ELM 327 scanner for my Corsa
Has anyone had any success with OBD II on a corsa? and if yes, which protocol
I guess it is ISO 9141-2, from the pin-outs on the OBD II connector in the fusebox area, but would love to hear from anyone who has actually tried it out

ramkris · 19th April 2009, 12:00

I was curious about this thread and after going through the thread I am of the impression there was no tool for Suzuki vehicles other than the Tech II tool which is used in service centres. So is there any tool that was identified for use with suzuki vehicles?

I came across this interesting thread which talks about a tool call blitz r vit which is specific to JDM specific vehicles.

Suzuki Club Singapore - View topic - ScanGauge II & ElmScan 5 OBD-II Diagnostic Scantool

But it appears quite expensive around 400+ USD.

ajith · 3rd May 2009, 19:25

Does anybody have any experience to report using an OBD II reader with Verna CRDi? Am interested in monitoring RPM and reading any engine check codes.

rohitrk · 4th May 2009, 15:33

So far both my Hyundai cars Getz, Sonata Embera are OBDII compliant. So you can use any off the shelf OBDII scanner. I have scanguage make by linear logic that works well with both the cars. Even custom programming xgauge works well too.

SamtheLeo · 4th May 2009, 16:14

Guys,

Please advise if Mahindra (Scorpio 2006 SLX) would be OBD II compliant & if yes where to look for the port.

29th January 2009, 00:38	#151
vinaydas Senior - BHPian Join Date: Apr 2007 Location: Bengaluru Posts: 1,399 Thanked: 148 Times	does mahindra vehicles support this (particularly scorpio)
	() Thanks

28th February 2009, 10:06	#152
gigy Senior - BHPian Join Date: Jul 2006 Location: mumbai Posts: 1,321 Thanked: 47 Times	Will this work in baleno using Centerfuse 2.0 DealExtreme: $54.67 ELM327 Bluetooth OBD-II Wireless Transceiver Dongle Attached Images
	() Thanks

13th March 2009, 08:36	#153
sdh BHPian Join Date: Jun 2007 Location: Bangalore Posts: 143 Thanked: 4 Times	Can some one help me with Swift and ELM Scan 5 (elm 327 chip, 1.3a version firmware). If I connect it to DLC connector, using the scan terminal, I find that is detects the protocol as ISO 14230. It does not read any sensors, but issuing AT MA dumps data constantly and the vaues change if you press throttle, so I assume some data is coming out of engine. Now question is how to make sense out of it. Last edited by sdh : 13th March 2009 at 08:44. Reason: typos
	() Thanks

13th March 2009, 13:51	#154
dilipkumar7278 BANNED Join Date: Mar 2006 Location: COCHIN Posts: 441 Thanked: 109 Times View My Garage	ScanGuage Hi I have a scanguage with me which I bought from babishek our fellow team-bhp member.Originally it was meant for lancer but the thing was not compatible with it. I now have a swift diesel, thought this will work but was not meant to be..So which all cars does SG work? Cheers Dilip
	() Thanks

14th March 2009, 06:22	#156
16v100bhp BHPian Join Date: Sep 2005 Location: Middletown CT USA Posts: 329 Thanked: 11 Times View My Garage	I am using these clicky on my audi which I got for 10$ before. The compatible ross tech software is free for all basic stuff like reading and erasing error codes on all modules. You have to spend a 100 more to go advanced. Attached Thumbnails
	() Thanks

14th March 2009, 07:34	#158
hrishig BHPian Join Date: Apr 2007 Location: Pune Posts: 466 Thanked: 180 Times	Anybody have idea about NHC idsi? Is it there ? if yes where it is located.
	() Thanks

14th March 2009, 13:06	#159
ask77 BHPian Join Date: Nov 2008 Location: Agra Posts: 147 Thanked: 23 Times	Try using digimoto . sometime another software can interpret and display the data more accurately so try other softwares there are lots available on the net.
	() Thanks

16th March 2009, 10:51	#160
leadf00t BHPian Join Date: Oct 2007 Location: MH04 Posts: 439 Thanked: 15 Times View My Garage	Does anyone know of a budget scanner for the Mitsubishi MUT3 protocol. From what i read of MUT3 or MUT-III, it is a variation of the ICAN protocol. Does anyone have any prior experience of using this scanner. All links on the net points to a 1.5L + scanner with a laptop. sounds useless to me . Maybe something in the range of max 15k 20K would be better. maybe a cable+software combo that can be loaded to any laptop.
	() Thanks

9th April 2009, 17:36	#161
abhi182 BHPian Join Date: Apr 2005 Location: Pune Posts: 370 Thanked: 531 Times View My Garage	Am about to order a ELM 327 scanner for my Corsa Has anyone had any success with OBD II on a corsa? and if yes, which protocol I guess it is ISO 9141-2, from the pin-outs on the OBD II connector in the fusebox area, but would love to hear from anyone who has actually tried it out
	() Thanks

19th April 2009, 12:00	#162
ramkris BHPian Join Date: Oct 2007 Location: Bangalore Posts: 122 Thanked: 20 Times	scantools for jdm vehicles ala suzuki I was curious about this thread and after going through the thread I am of the impression there was no tool for Suzuki vehicles other than the Tech II tool which is used in service centres. So is there any tool that was identified for use with suzuki vehicles? I came across this interesting thread which talks about a tool call blitz r vit which is specific to JDM specific vehicles. Suzuki Club Singapore - View topic - ScanGauge II & ElmScan 5 OBD-II Diagnostic Scantool But it appears quite expensive around 400+ USD.
	() Thanks

3rd May 2009, 19:25	#163
ajith BHPian Join Date: May 2004 Location: Bangalore, Karnataka, India Posts: 29 Thanked: 3 Times	Does anybody have any experience to report using an OBD II reader with Verna CRDi? Am interested in monitoring RPM and reading any engine check codes.
	() Thanks

4th May 2009, 15:33	#164
rohitrk BHPian Join Date: Jan 2005 Location: pune Posts: 92 Thanked: 14 Times	Hyundai are OBDII compliant So far both my Hyundai cars Getz, Sonata Embera are OBDII compliant. So you can use any off the shelf OBDII scanner. I have scanguage make by linear logic that works well with both the cars. Even custom programming xgauge works well too.
	() Thanks

4th May 2009, 16:14	#165
SamtheLeo BHPian Join Date: Apr 2009 Location: Melbourne Posts: 451 Thanked: 26 Times	Guys, Please advise if Mahindra (Scorpio 2006 SLX) would be OBD II compliant & if yes where to look for the port.
	() Thanks