[subhash vatyani]

hello sir
i am software engineer and developed Automatic vehicle tracking system using GPS technology, to integrate it with your Autocop XS security system i require the wiring diagram /or manual of autocop XS since it is not available with us , it will help us in installation with autocop XS unit in proper way.
regard
subhash vatyani

[drkumarmp]

Here is the wiring Diagram & Remote Control Operations for Autocop XS 6000/6050.

[Ayson]

Originally Posted by drkumarmp

Here is the wiring Diagram & Remote Control Operations for Autocop XS 6000/6050.

Is there any information about how to enter programing mode
mentioned under "Condition" for Sr. No. 13. How do I initiate key learning / key matching? Thanks.

[k2max6]

Originally Posted by Ayson

Is there any information about how to enter programing mode
mentioned under "Condition" for Sr. No. 13. How do I initiate key learning / key matching? Thanks.

If you have an autocop remote that has a green led then you can follow this procedure for key matching -

Unlock the Driver Door
Ignition on
Driver door is open
5 times press door switch slowly - system will make a beep
2 times press remote's lock button ( the one to be paired) - beep again
Done

[Ayson]

Originally Posted by k2max6

If you have an autocop remote that has a green led then you can follow this procedure for key matching -

Unlock the Driver Door
Ignition on
Driver door is open
5 times press door switch slowly - system will make a beep
2 times press remote's lock button ( the one to be paired) - beep again
Done

Sorry, i didn't mention any details. I have a Ford Ikon Flair, which comes with a 3 button remote: Lock, Unlock and *. I don't think my system has any way to beep like you mentioned.

It's a very basic system, ie.: lock, unlock, and alarm goes off if any door is opened when locked. No motion sensor, impact sensor, power window control, proximity sensor, etc....

Anyway, I will try what you mentioned, but a doubt, by 'ignition on' do you mean engine started or just the last position of the key? Thanks.

[k2max6]

Originally Posted by Ayson

Sorry, i didn't mention any details. I have a Ford Ikon Flair, which comes with a 3 button remote: Lock, Unlock and *. I don't think my system has any way to beep like you mentioned.

It's a very basic system, ie.: lock, unlock, and alarm goes off if any door is opened when locked. No motion sensor, impact sensor, power window control, proximity sensor, etc....

Anyway, I will try what you mentioned, but a doubt, by 'ignition on' do you mean engine started or just the last position of the key? Thanks.

Last position of the key.
This should work as long as you have an autocop remote that has a green led. Won't work for red ones.

[Ayson]

Originally Posted by k2max6

Last position of the key.
This should work as long as you have an autocop remote that has a green led. Won't work for red ones.

Mine's red. You wouldn't happen to know the procedure for that one would you?

[searchingheaven]

There is a set of switches on the Autocop XS PCB for controlling different functions like alarm, horns, etc. The legend for these switches is is placed/stuck on the inside of the small cover placed above the switch. In my unit, the legend somehow got soiled. And I need it to switch off the alarm and rev horn off. If somebody would be kind enough to post a image or just the data, I would be grateful..