[nikibusa]

Thanks for all your appreciation guys.Was just reading it on google & found it really innovative..But yes not an easy thing to do huh. & Ramie bhai..you better keep us posted on this..He He.

Niki.

[manveet]

There is one small hitch before all of us rush to the Hardware shop to buy Acryclic Rods .. you first need to buy appropriate Projector HL's for your ride ..

And those are where the real kharcha is involved .. DIY wagehra to baad ki baat hai

[ramie2400]

manveet bro you are absolutely right...the main things are the Projectors HL..which involves deep pockets..rest doing the DIY thing is affordable..one can make it easily but installing it inside is where it pins me down.
I am still figure out how to open my ford ikons HL..the best option i can try on my Pulsar bike first(adding 2 verticle rings..lolz
Guys the time i start it..i'll keep you updated.
Ramie

[binz]

Are these acrylic rods the same things that we use in Glue guns .. coz i have two 2 foot rods and they look awfully similar.

[Vid6639]

Originally Posted by binz

Are these acrylic rods the same things that we use in Glue guns .. coz i have two 2 foot rods and they look awfully similar.

lol!!! no dude if you use the glue gun sticks they will melt when you put them in the headlamp. a very sticky situation dude.

[a4_attitude]

notorious are you locating acrylic tube, its avaialble @40 a inch min length is i guess 1 metre my friend recently bring it to me for a DIYproject similar to angel eyes but not meant for cars.
thickness of that tube 6 mm approx

[NOTORIOUS]

Originally Posted by a4_attitude

notorious are you locating acrylic tube, its avaialble @40 a inch min length is i guess 1 metre my friend recently bring it to me for a DIYproject similar to angel eyes but not meant for cars.
thickness of that tube 6 mm approx

From where did your friend got it.

[a4_attitude]

I just called him up , he said he bought it from a contractor who is working in his office and he is working in a call centre.

[binz]

Got them,Bent them,Grooved half of 1.Looks sexy!!

Will be a perfect fit for a baleno..if anyone wants, ill give em for a nominal amount after they are completed.

[Godfather]

Originally Posted by binz

Will be a perfect fit for a baleno..if anyone wants, ill give em for a nominal amount after they are completed.

Make some for the Safari and you have 2 buyers for Sure..

Godfather

[binz]

Dont crib about quality,it was a DIY job and a really crude one at that.Now if only some rich guy or NRI could sponsor a Dremel.Godfather??

Nonetheless,..it looks super hot from one foot away and is seriously bright.

Placed it on a 100pcd aura rim so you could relate to its size.

OT:Im selling those rims for reall cheap.Please look at the marketplace:-);-)




[img=http://img406.imageshack.us/img406/4240/abcd0002ps9.th.jpg]

DAyyyyam..imagshack is slow ..

[Godfather]

Make for the Dicor.. Please..
Tell me what all u need..

Godfather

[binz]

Originally Posted by Godfather

Make for the Dicor.. Please..
Tell me what all u need..

Godfather

Find this:

http://www.dremel.com/en-us/tools/to...=66204&I=69808
for me and ill do it for free.Im serious.Using a knife is a big pain.

After tomorrow ill know if i can or cannot.(board results )

[Godfather]

Originally Posted by binz

Find this:

http://www.dremel.com/en-us/tools/to...=66204&I=69808
for me and ill do it for free.Im serious.Using a knife is a big pain.

Just ordered it through Amazon.. WIll have it with me by Monday.. Take it from me later on.
Dont worry about the results da..

Godfather

[pawan]

real nice binz any ways what material glass rod did you use.