[War4Car]

Hello All,

Its been a year since I have been working on my project car. I have been restoring the subjected from about a year due to limited spares and workshops that can handle TATA Indigo Dicor.

I am almost at the end of this project and I have a query on Thermostat Valve for Tata Indigo DICOR. Please help here.

Does TATA Indigo DICOR have a conventional thermostat valve or is it completly running on Sensors? I am thoroughly confused with the spare part available on boodmo and the videos that I have seen on Thermostat valves. Please advise.

The one that you see in the picture is that a Thermostat valve or a Thermostat housing unit for Indigo DICOR? I just want to get this right.

Looking forward for your valuable advises.

Thank you.

[Rehaan]

Originally Posted by War4Car

Does TATA Indigo DICOR have a conventional thermostat valve or is it completly running on Sensors?

I don't know for sure - but I am willing to bet it would be a conventional mechanical thermostat.

Originally Posted by War4Car

The one that you see in the picture is that a Thermostat valve or a Thermostat housing unit for Indigo DICOR?

What you've shown is the full housing.

The actual thermostat valve looks like this:


And it would sit in the housing (that you've shared a picture of) like this:

[condor]

Originally Posted by War4Car

Does TATA Indigo DICOR have a conventional thermostat valve or is it completly running on Sensors? I am thoroughly confused with the spare part available on boodmo and the videos that I have seen on Thermostat valves. Please advise.

Havent you opened the thermostat yet ? Sharing a pic of the one that is in the car can help get you better responses.

Suggest to pull it out, and order one from Boodmo. You can compare the one you have vs the one you get, and if not compatible, use the return period to send back the incompatible part.

[War4Car]

Originally Posted by Rehaan

I don't know for sure - but I am willing to bet it would be a conventional mechanical thermostat.

What you've shown is the full housing.

The actual thermostat valve looks like this:
Attachment 2383744

And it would sit in the housing (that you've shared a picture of) like this:
Attachment 2383746

Thank you for sharing this information. Yes, this is a conventional Thermostat. What I understood was for few cars Thermostat is found in the front of the engine and for few cars like Indigo DICOR, Thermostat is placed in the back of the engine. This was little peculiar though as most cars these days have Thermostat somewhere close to the front of the engine. I got the thermostat replaced at last with the one stated in this thread. Thanks for all the help.

[War4Car]

Originally Posted by condor

Suggest to pull it out, and order one from Boodmo. You can compare the one you have vs the one you get, and if not compatible, use the return period to send back the incompatible part.

Thank you. I ordered the part and replaced the same. It is compatible. Thank you for your help.