M-800 A/C cools only above 2500 rpm

PAVAN KADAM · 25th February 2008, 14:17

Whoa,

Thanks guys for the suggestions,

Thanks again because all this was checked for.

Finally the a/c is working, there's a small amplifier for this a/c which went kaput',
Replaced that unit today morning.

Now the a/c is fine and working,

Still, cooling.....?, not great.

Any place where i can get a better gas filled.

PAVAN KADAM · 25th February 2008, 14:18

Thanks Jyobeb for scaring me, the compressor is kicking fine .

PAVAN KADAM · 25th February 2008, 14:20

Humyum,

Thanks,

Yes the idling without a/c now is 750 rpm
and the idling with the a/c on is 900 rpm

PAVAN KADAM · 25th February 2008, 14:21

Moderator great i have received so many inputs from guys out there, looks like now i know where to find the basic solution for any further problems arising.

My problem is solved, I think you can have this thread closed.

25th February 2008, 14:17	#16
PAVAN KADAM BANNED Join Date: Jan 2007 Location: NAMMA BENGALURU Posts: 5,602 Thanked: 2,549 Times	Whoa, Thanks guys for the suggestions, Thanks again because all this was checked for. Finally the a/c is working, there's a small amplifier for this a/c which went kaput', Replaced that unit today morning. Now the a/c is fine and working, Still, cooling.....?, not great. Any place where i can get a better gas filled.
	() Thanks

25th February 2008, 14:18	#17
PAVAN KADAM BANNED Join Date: Jan 2007 Location: NAMMA BENGALURU Posts: 5,602 Thanked: 2,549 Times	Thanks Jyobeb for scaring me, the compressor is kicking fine .
	() Thanks

25th February 2008, 14:20	#18
PAVAN KADAM BANNED Join Date: Jan 2007 Location: NAMMA BENGALURU Posts: 5,602 Thanked: 2,549 Times	Humyum, Thanks, Yes the idling without a/c now is 750 rpm and the idling with the a/c on is 900 rpm
	() Thanks

25th February 2008, 14:21	#19
PAVAN KADAM BANNED Join Date: Jan 2007 Location: NAMMA BENGALURU Posts: 5,602 Thanked: 2,549 Times	Moderator great i have received so many inputs from guys out there, looks like now i know where to find the basic solution for any further problems arising. My problem is solved, I think you can have this thread closed.
	() Thanks