[Veels n Rhodes]

My Hyundai Creta Base 1.4 Modified with Plati Alloys PY-1006 Full machined Dull black, They are 28000 for set of 4. Retained Stock 16 inch Good Year tyres. Roof rails added for Enhanced look.

[Kams_cars]

Originally Posted by sandeep_vgl

Safari Storme with GTR alloys (8J) and stock Duelers

@Sandeep_vgl,

I loved the alloys.

I have a few queries to wheel upgrade for my storme (Astern Black)

* Can we upgrade existing stock to a high "inch alloys ?

* I do not want a full blown out balloon look. Something what you did here is fine by me. So, will this require additional cutting/machine work on alloys to overcome the rubbing affect?

* Are there any trusted portals where we can go through the alloy list?

Thanks.

[dinyaar]

Hi Guys
My 2008 Honda Civic with Momo Quantum in 15 " with Pirelli P7s in stock size 195/65/r 15.

[Altocumulus]

My Ritz with DIY painted alloys and red calipers/drums/tow hook.

[Darth Sid]

Originally Posted by Altocumulus

My Ritz with DIY painted alloys and red calipers/drums/tow hook.

Attachment 1528035

MGA wheels generally look very plain jane but by painting them black you have made them look sporty. They look good now.

[Altocumulus]

Originally Posted by Darth Sid

MGA wheels generally look very plain jane but by painting them black you have made them look sporty. They look good now.

Thanks much, I had used red lips as well however removed them when I painted the calipers and drums red.

[Darth Sid]

Originally Posted by Altocumulus

Thanks much, I had used red lips as well however removed them when I painted the calipers and drums red.

Attachment 1528444

OK, that red lip definitely complements the black rims but yes, it is probably better to have either that or red calipers/drums.

[Rajesh Rawal]

Plati py 259 -14 inches

Tyres-185/65/14 Michelin xm 2

[RevJ]

"A good set of wheels makes any car look good"

Plati PY-1022 16' 7 J
Kenda Kaiser 205/50 R16

[Traveler]

Originally Posted by Unavowed_X9

Attachment 1417787

Attachment 1417788

Attachment 1417789

265/70R15 Apollo Apterra on 15x7JJ CBU Enkei Wheels on my Gangsta. Hub caps had to be replace with Infinity Off-road hubcaps after I lost one of the original caps in an Off-road trail.

How are your Apterra's holding. I had a bad experience with Hawkz on my Pajero, but that was 3 years back. They has a constant vibration and could not be balanced and went out of balance within a few hundred kilometeres.

Would love to know your experience with these Apterra's.

[sooraj.naik]

Stock 20 Inch Alloys.

[aks2010]

Upgraded my Swift VDi to 15 inch alloys shod with Bridgesotne Potenza 195/60/R15 tyres.

[aks2010]

Stock alloys on my Hyundai Sonata shod with Hankook Kinergy GT 205/65 R16 tires.

[bharatsomany]

VEHICLE:
2016 Maruti Ciaz ZDi+ RS (Pearl Snow White)


WHEELS:
Plati PY-196 FMDB - Dull (Matt) Black with Fully Machined Face
17x8.0 4x100 ET35 Reverse Mounting
₹8,000 x 4 = ₹32,000 (BK Tyres, Lajpat Nagar)


TYRES:
Giti GitiControl 280
245/45ZR17 99W (Treadwear: 280; Traction: AA; Temperature:A)
₹6,500 x 4 = ₹26,000 (BK Tyres, Lajpat Nagar)

Giti 205/60R16 as stepney @ ₹3,500 (Mounted on OEM 16x6 ET35 Alloy)


NOTES:

• RoadForce Balancing & Nitrogen @ ₹2,000 per set (of 5) at Haryana Car Care, Faridabad. Sale of OEM Wheels @ ₹3,000 each (3x 16" Alloys; 1x Alloy kept as stepney), OEM Tyres @ ₹4,000 each (4x Apollo Alnac 4G 195/55R16) & OEM Stepney @ ₹4,000 (Steel Wheel with MRF 185/65R15). TOTAL COST = 32,000 + 26,000 + 3,500 +2,000 - 9,000 - 16,000 - 4,000 = ₹34,500.
• +15.4mm Ground Clearence (652.3mm dia vs stock dia of 621.5mm).
• Ideal Wheel Offset is +38mm (Wheels shifted 3mm inside as compared to +35mm setup shown).
• No suspension / body mods.
• No Rubbing Whatsoever.
• Stepnee fits in the boot albeit lifts the carpet a tad bit due to the height of the jacking kit (not the wheel/tyre).
• Speedometer now accurate compared to GPS logger.
• Tyre Pressures: 27psi Front & 22psi Rear for normal-load; 27psi Front & 24.5 psi Rear for full-load/high-speed.

FRONT PERSPECTIVE:


TUCK LINE:


SIDE (FRONT):


TYRE DETAIL:


45° ANGLED VALVE STEM:


SAME SETUP WITH MATT BRONZE WHEELS (METALLIC SILKY SILVER CAR):

[equinox22]

Wheels from my BMW 335i.