The official alloy wheel show-off thread. Lets see your rims!

Nikhilb2008 · 2nd February 2010, 12:47

I think AVA should be better than League, HR, Plati....

para_7k · 2nd February 2010, 13:55

@ikoneer,

Why don't you try Hyundai OE alloys. I got one while buying the car itself.

They cost me 16.5K for a set of 5 and size is 13 x 4.5J. Only let down is that they don't have the killer looks of the chinese alloys. No worries of fake either

When changing the tyres, I was planning to trade them off for a 5 or 5.5J alloys as the ideal rim size for 175 is 5J though minimum rim size is 4.5J.

Deepak insisted me to keep them and he also told me that they are very very durable compared to chinese brands and will last long. I was reluctant at first but then decided to keep as I can save at least 10K.

He also told me that there wouldn't be any issues with fitting 175s on 4.5J rims.

Having done 3000 kms, I can vouch for this.

ikoneer · 2nd February 2010, 15:33

@Para:

OE alloys actually look dull to me (my view, do not intend to hurt your views please) hence it is not in my consideration.

This is the first time i went for an after market alloys and it was a very good learning experience for me.

para_7k · 2nd February 2010, 16:01

Quote:

Originally Posted by ikoneer

@Para:

OE alloys actually look dull to me (my view, do not intend to hurt your views please) hence it is not in my consideration.

This is the first time i went for an after market alloys and it was a very good learning experience for me.

I very much agree with you. They look bland and that is the reason I too wanted to change them

. One of my friends even said "This wheelcap looks different and nice".

He very strongly insisted me to keep them. He also told me that some of the cheap alloys corrode over time because chennai's average humidity is high.

BTW, have you checked out apollo alloys ? There are various ones available in 13".

ikoneer · 2nd February 2010, 16:10

Are the following points enough to choose an alloy, anything else to check for a correct fitment

Rim Size - 13"
Rim Width - 5j (is it this?)
Offset - ?
PCD - 100

Quote:

Originally Posted by para_7k

BTW, have you checked out apollo alloys ? There are various ones available in 13".

No not yet. I saw pictures of Apollo Alloys in tbhp posts and it looks nice.

I am not able to view the apollo web site from office, blocked

tsk13 · 2nd February 2010, 23:33

Ikoneer, the link to the Konig alloy on i10 but unfortunately it's 14". http://www.team-bhp.com/forum/test-d...ml#post1255564

Moreover, one member Taj got 13" Konigs for his Santro which are compatible with your i10. The link: http://www.team-bhp.com/forum/tyre-a...ml#post1309661

Link to Alloys on my Xing (Design No:373 Full Machined Gun Metal Finish 13x5.5j) : http://www.team-bhp.com/forum/tyre-a...ml#post1341694

IKONEER, please retain the original Nuts as the aftermarket ones are prone to rust and other problems.

furioussphinx · 4th February 2010, 00:13

Here are a few shots of the alloys taken in motion. Panning shots.

Latheesh · 4th February 2010, 10:31

I love your Punto :-)

MurtazaGhiya · 4th February 2010, 11:20

Quote:

Originally Posted by furioussphinx

Here are a few shots of the alloys taken in motion. Panning shots.

Apart from the great looking Punto, you have great photography skills

VTEC_Rocks · 4th February 2010, 12:05

My Swift VDI ABS with 15" Lenso SHU Hypersilver with 195/50 Bridgestone G3

ishotmydog · 4th February 2010, 12:13

that is one neat punto sphinx, excellent pictures

anachronix · 4th February 2010, 16:17

That Punto looks HOT!

Nice panning shots as well.

Epic · 4th February 2010, 16:35

Quote:

Originally Posted by VTEC_Rocks

My Swift VDI ABS with 15" Lenso SHU Hypersilver with 195/50 Bridgestone G3

Hi VTEC,

Nice rims. I have always liked the Lenso SHU specifically for its multi spoke design & mirror lip & was even contemplating on getting myself a set. I however, feel a 205/55/R15 tire would look better on them. Could you share the offset of these rims?

Also, do you find it difficult to clean your rims maybe due to the close multi spoke design?

azharace · 4th February 2010, 18:07

The official alloy wheel show-off thread. Lets see your rims!-photo0240.jpg

Hey guys. I'm buying a Chevy beat Black LS and was looking out for alloys when i came across this one. I'm sorry for the poor quality because i took the pic wit my phone but can anyone verify whether this is an original momo? Because i came across on a site that this model comes wit seven spokes plus this is a 14" and i thought momo started from 15". My knowledge is pretty poor

so i'm asking you guys for help. I was quoted 21.5k for set of 4. My question is are they original? And if they aren't, are they worth it? Thanks !

SumitBahl · 4th February 2010, 18:56

MOMO CORSE does come in 14".

Check on the official website:
MOMO Italy - Official Web Site

2nd February 2010, 12:47	#2716
Nikhilb2008 Distinguished - BHPian Join Date: Jul 2006 Location: Bangalore Posts: 5,196 Thanked: 10,137 Times	I think AVA should be better than League, HR, Plati....
	() Thanks

2nd February 2010, 13:55	#2717
para_7k BHPian Join Date: Feb 2009 Location: chennai Posts: 469 Thanked: 112 Times	@ikoneer, Why don't you try Hyundai OE alloys. I got one while buying the car itself. They cost me 16.5K for a set of 5 and size is 13 x 4.5J. Only let down is that they don't have the killer looks of the chinese alloys. No worries of fake either When changing the tyres, I was planning to trade them off for a 5 or 5.5J alloys as the ideal rim size for 175 is 5J though minimum rim size is 4.5J. Deepak insisted me to keep them and he also told me that they are very very durable compared to chinese brands and will last long. I was reluctant at first but then decided to keep as I can save at least 10K. He also told me that there wouldn't be any issues with fitting 175s on 4.5J rims. Having done 3000 kms, I can vouch for this.
	() Thanks

2nd February 2010, 15:33	#2718
ikoneer BHPian Join Date: Aug 2007 Location: chennai Posts: 486 Thanked: 14 Times	@Para: OE alloys actually look dull to me (my view, do not intend to hurt your views please) hence it is not in my consideration. This is the first time i went for an after market alloys and it was a very good learning experience for me.
	() Thanks

2nd February 2010, 23:33	#2721
tsk13 Senior - BHPian Join Date: Jan 2009 Location: New Delhi Posts: 1,256 Thanked: 361 Times	Ikoneer, the link to the Konig alloy on i10 but unfortunately it's 14". http://www.team-bhp.com/forum/test-d...ml#post1255564 Moreover, one member Taj got 13" Konigs for his Santro which are compatible with your i10. The link: http://www.team-bhp.com/forum/tyre-a...ml#post1309661 Link to Alloys on my Xing (Design No:373 Full Machined Gun Metal Finish 13x5.5j) : http://www.team-bhp.com/forum/tyre-a...ml#post1341694 IKONEER, please retain the original Nuts as the aftermarket ones are prone to rust and other problems. Last edited by tsk13 : 2nd February 2010 at 23:35.
	() Thanks

4th February 2010, 00:13	#2722
furioussphinx BHPian Join Date: Feb 2006 Location: Hyderabad Posts: 536 Thanked: 2 Times View My Garage	Here are a few shots of the alloys taken in motion. Panning shots. Attached Thumbnails
	() Thanks

4th February 2010, 10:31	#2723
Latheesh Senior - BHPian Join Date: Dec 2007 Location: CNN/BLR Posts: 4,241 Thanked: 10,070 Times	I love your Punto :-)
	() Thanks

4th February 2010, 12:05	#2725
VTEC_Rocks BHPian Join Date: Jan 2010 Location: Bangalore Posts: 140 Thanked: 2 Times View My Garage	My Swift VDI ABS with 15" Lenso SHU Hypersilver with 195/50 Bridgestone G3 Attached Thumbnails
	() Thanks

4th February 2010, 12:13	#2726
ishotmydog BHPian Join Date: Jan 2008 Location: Pune Posts: 593 Thanked: 18 Times	that is one neat punto sphinx, excellent pictures
	() Thanks

4th February 2010, 16:17	#2727
anachronix Senior - BHPian Join Date: Mar 2006 Location: Madras Posts: 3,286 Thanked: 1,336 Times View My Garage	That Punto looks HOT! Nice panning shots as well.
	() Thanks

4th February 2010, 18:07	#2729
azharace Newbie Join Date: Jan 2010 Location: Chennai Posts: 22 Thanked: 0 Times	Hey guys. I'm buying a Chevy beat Black LS and was looking out for alloys when i came across this one. I'm sorry for the poor quality because i took the pic wit my phone but can anyone verify whether this is an original momo? Because i came across on a site that this model comes wit seven spokes plus this is a 14" and i thought momo started from 15". My knowledge is pretty poor so i'm asking you guys for help. I was quoted 21.5k for set of 4. My question is are they original? And if they aren't, are they worth it? Thanks !
	() Thanks

4th February 2010, 18:56	#2730
SumitBahl BHPian Join Date: May 2008 Location: Chandigarh Posts: 976 Thanked: 230 Times View My Garage	MOMO CORSE does come in 14". Check on the official website: MOMO Italy - Official Web Site
	() Thanks