[SVS1806]

Originally Posted by Veels n Rhodes

My Hyundai Creta Base 1.4 Modified with Plati Alloys PY-1006 Full machined Dull black, They are 28000 for set of 4. Retained Stock 16 inch Good Year tyres. Roof rails added for Enhanced look.

I'm also planning to buy Creta E+ diesel. I wish to add roof rails and boot parcel tray. Did you get the stock roof rails installed? How is it done, what's the cost and did you face any problem due to the installation?

[akshay4587]

Acquired an Alfa Romeo 159 2.2 JTS recently.
Switched from stock 17s" to 19s" from a wrecked 159 Ti.

[Dry Ice]

Originally Posted by Somashekar.B

I upgraded my 2009 innova from stock alloys to new one.

Here are few pics

Looks good, what's that on the bonnet in the last pic?

[SHAHBAAZ]

Hi all.
Its been a long time that I am planning to replace stock wheels to 15 inch alloys on my 2009 Black Innova. Somehow, I am not able to figure out which one will go well on it.
As I live in Pune, there are many shops where I have visited. The ones that I finalized, were either out of stock or not being manufactured or too expensive for my pocket.

Somehow while looking out for various patterns, I came across an ad on olx. Can any one of you tell me which brand are these and where can I get new ones. Though I have tried to contact the person, but with no response.
Here is the link of the ad.
https://www.olx.in/item/innova-alloy...tml#381a50e1b6





I hope to get good ones on to my Black beast.



My choice is for machined look or one can say hyper silver with machined lips. They will look beautiful on black. Many of my petrohead friends suggested to go for black which may look good. But my preference is for a machined look. If any of you have good thoughts over the pattern, then kindly share or pm pics or link.

[SVNY]

Upgraded from stock Rims to Lenso Conquista 8

[venom_op]

Originally Posted by vvb8530

Had been itching to do this since even before i bought the car but stopped myself considering warranty issues since the general feel around about Skoda is that they can void warranty for even applying a sticker on the car ...

The stance has completely changed and the wider stance with the darker shade of the rims on the black colour of the car is making it look totally Ganstaa which is the look that i wanted for it.

Regards,
VVB

These look sick!! How much did they set you back by?

Mod's note: Entire quoted post trimmed in the best interests of readability.

[vvb8530]

Originally Posted by venom_op

These look sick!! How much did they set you back by?

Mod's note: Entire quoted post trimmed in the best interests of readability.

Thanks buddy!!

The rims set me back by about 1L.

Regards,
VVB

[SwapnilNalavade]

My Gypsy King shod with Off Road Rims & Michelin Latitude Cross 215/75/R15 Tyres.

[GT145]

Oz Ultraleggera 16" Rims and Michelin PS4 ST 205/50/R16 Tyres.

[RevJ]

Upgraded from 16 inch to 17 inch GTR Wheels.
17" 8.5J running on Michelin Pilot Preceda 225/45 R17

[gururajrv]

Brezza ZDI+ running on stock alloys wrapped around in Apollo Almac rubber 215/60 R16. Just that I've changed the alloy color to matte black.

Alloy, Rubber and Color:


Overall stance:

[CarMaster]

Originally Posted by RevJ

Upgraded from 16 inch to 17 inch GTR Wheels.
17" 8.5J running on Michelin Pilot Preceda 225/45 R17

Wow. The car looks super cool with the new alloys. Brilliant selection there. I believe the OEM alloys are clubber alloys. I you wish to sell it please PM me. Thanks

[ashutoshb]

Here is a Momo copy from Plati on a Datsun Go Plus. These are 15 inch rims, in a Gun Metal finish. The tyres are 185/65 R15 JK Vectras.

The car is my company car, about to be sold to an individual, hence the upgrade.

The four wheel set costed my ₹19,500.

[pramodkumar]

Originally Posted by RevJ

Upgraded from 16 inch to 17 inch GTR Wheels.
17" 8.5J running on Michelin Pilot Preceda 225/45 R17

Sweet alloys, kindly let me know how much you paid for the alloys and where did you buy them from?

I hope they have the same design in 114.3 PCD as well. Looking for a set for my cruze

Pramod

[bharatsomany]

VEHICLE:
2017 Skoda Octavia RS 2.0 TSI (169kW/230PS; Petrol; 1535mm/1544mm F/R Track) - Candy White

WHEELS:
ATS Temperament 5 - Blizzard Grey with Polished Lip
9.0x19 5x112 ET60 CB66.6 900Kg-Load (with 57.1mm Hub Centric Rings)
₹ 19,000 x 4 = ₹ 76,000 (PerformanceAlloys.com , UK)

TYRES:
Michelin Pilot Sport PS2
265/35ZR19 (94Y) N2 (Porsche)
Treadwear 220; Traction AA; Temperature A
₹ 25,000 x 4 = ₹ 1,00,000 (BK Tyres, Lajpat Nagar, New Delhi, INDIA)

NOTES:

• H&R DR-System 16mm (8mm each) 5x112 57.1 Spacers in the front with custom machined Hub Centric Rings (Effective Offset of 52mm in the front).
• +16.9mm Ground Clearence (668.1mm dia vs stock dia of 634.3mm). Unladen GC now ~157mm vs 155mm of the regular Octavia (without the lowered suspension).
• No suspension mods.
• Requires Rear Fenders to be rolled and the front right fender liner to be pressed in slightly to ensure clearance while turned full-lock-left (No contact when turned full-lock-right as the left side has more space).
• Stepnee: T 125/70R19 100M (657.6mm dia) on 4x19 ET29 wheel (sourced from a magnanimous owner of an Audi A4). Fits in the boot with space to spare.
• Speedometer accurately matches GPS logger as checked at 30, 50, 70, 80 & 100 Km/h.
• OEM Setup was 225/45R17 on 7.0x17 ET49. The effective track is therefore altered from 1535mm to 1529mm in the front and from 1544mm to 1522mm in the rear.

ATS TEMPERAMENT 5:


SIDE VIEW:


FRONT TYRE:


TUCK LINE:


FRONT VIEW:


STEPNEE:


FRONT SUSPENSION CLEARANCE (WHEEL ONLY):


FRONT SUSPENSION CLEARANCE:


REAR SUSPENSION CLEARANCE (UNLADEN):


REAR SUSPENSION CLEARANCE (JACKED UP, WHEELS IN THE AIR):


REAR CALIPER CARRIER CLEARANCE:


FRONT RIGHT FENDER LINER RUBBING MARKS: