[regnex]

Originally Posted by vaseem

Guys,

what is the PCD for SX4 ZXI & does any other share the same rim in pressed steel?

TIA

Vaseem

I believe SX4 is 114.3 PCD with 5 holes and offset ET40
same as Accord which is 114.3 PCD 5 holes and offset ET40

cheers

[kpzen]

Vaseem
SX4 PCD is 114.3
Most of the cars with 16" wheels come with alloys. Why do you want pressed steel ?

Innova - Civic - Accord have same PCD

[vaseem]

Originally Posted by kpzen

Vaseem
SX4 PCD is 114.3
Most of the cars with 16" wheels come with alloys. Why do you want pressed steel ?

Innova - Civic - Accord have same PCD

Hi kpzen,

I have an extra set of tyres with good tread on them, so wondering if i could lay my hands on the pressed steel rims

regards

Vaseem

[regnex]

Hi,

I have upgraded my fiesta alloys from 14" to 16" with tyres 205/45R16 .

I also choose the alloys with offset ET25.

The car looks cool, as the tyres have come out a bit from the body line.

I've been driving it with no problem and have not experienced any rubbing under the wheel arch area or while turning.

As i know that the recommended offset is from 38-40, would it harm my suspension or any other aspects of the car?

[ch.nathan]

I checked my Palio's rims' inner sides, out of curiousity. But not able to find where it's mentioned as 98 PCD.

Rather, this is what I found:

07 06 WILP 5.00B X 13H2 LP 1124 A

Anyone can deocde this?

[BANDHAV]

All I can tell you is that your rim is 5" wide and of 13" diameter.

[e-katz]

Originally Posted by kpzen

I think, its 100 PCD 40 offset.
Will check and confirm by evening.

Originally Posted by gkoneti

Polo alloy specs are 6J 15H2 ET40. This is what is mentioned on the sapres software of VW. I have noted it. PCD is 100 and 5 holes.

so which is the correct one among these for the polo? Can anyone share alloys available for the polo in indian market?

[BANDHAV]

Both the posts quoted by you have right information. The offset of Polo wheel is 40 and its 5 bolt 100 PCD. In case you are looking for 15" rims then you will have wider choice as Octavia has same specification but in case you are looking for 14" rim there is not much choice. I have seem the advertisement of onxy wheels in one of the auto magazine and there was a model for Polo in 14".

[ariendj]

what is the PCD of the Astar??

[BANDHAV]

^^The PCD of Astar like most Maruti Suzuki Small cars is 100.

[bharatbs]

What is the PCD for Honda City 2011 (ANHC)?

Can I use the Lenso alloys of my Maruti Swift (195/60 R15) on the Honda City?

Alloy Details:
Lenso SC01
Size 1565
8H PCD 100-114.3
ET +38

[khoj]

Originally Posted by bharatbs

What is the PCD for Honda City 2011 (ANHC)?

Can I use the Lenso alloys of my Maruti Swift (195/60 R15) on the Honda City?

PCD for the New City is 100 same as that of the Swift. The Lensos can be mounted on w/o any problem.

[avasekeh]

Can i mount the steel RIMS of a figo to a vista quadrajet? Both have the same PCD of 108 so it should be possible?

[avasekeh]

Originally Posted by avasekeh

Can i mount the steel RIMS of a figo to a vista quadrajet? Both have the same PCD of 108 so it should be possible?

Answering my own question. No, it is not possible. i am not sure about the exact technical specs apart from the PCD that prevent it from working but the ridges inside the figo discs are not deep enough and the brake pads scrape against them.

[FyreMasq]

Can anyone tell the Offset of mahindra Xylo?