[kpzen]

Originally Posted by pedrolourenco

Does it mean that the Chevrolet Spark also came with 114.3 PCD Wheels?

Yes, both Matiz and Spark wheel specs are same.

Reference to confirm - Nikhil's post
http://www.team-bhp.com/forum/tyre-a...ml#post1715125

[topedgemonk]

Sorry to bump an old thread.
I was trying to find silver alloys for R14 rims on my figo in Cochin. Finding 14 inch alloys is hard, finding silver ones is harder. Finally, I hit jackpot and found a set of Plati wheels I liked.
Now, Ford uses 4 bolts (108 PCD), all the wheels I saw had 8 holes. I was told you would put bolts in only 4 holes for 108 PCD and in more holes for using the same wheels on a 100PCD vehicle.


The guy pulled the 14inch wheels I liked off the display and on it was a little handwritten sticker with the number 114.3. A lot of others had 100/108 written on them.


That was it, no new wheels. I then looked online and found some online sites advertising the same rim as 5x114.3 , 8x100,108


It's been such a nightmare to find R14 wheels that my heart wants it to be a stickering mistake and the same rim to fit 108 PCD as well without the 'wobbly bolts'.


Does anyone in the gang know if the Plati rims for 5x114.3 will fit 8x100 and 4x108?

[ZinFluent]

A quick question, will the new Baleno 15 inch steel wheels be a direct fit for 3rd gen 2013 Honda City? The PCD for both is 4 X 100 and the wheel size too is 15 inch. Can anyone please guide with this?

[Mr. Nobody]

Are 5j x 14 ET41 (i10) compatible with 5j x 14 ET45 (new swift). Both also are 4 x 100 pcd. Thing is someone is selling his new swift steel rims and i was looking to change mine due to bents as well. The info i got for their specs was from wheel-size.com.

[PSM_360]

Originally Posted by ZinFluent

A quick question, will the new Baleno 15 inch steel wheels be a direct fit for 3rd gen 2013 Honda City? The PCD for both is 4 X 100 and the wheel size too is 15 inch. Can anyone please guide with this?

No. Hub bore diameter of these Maruti cars is 54.1 which will not fit 56.1 hub bore diameter of a Honda City (Vice-versa was possible though not recommended without hub centric rings). Not sure about offset for baleno but city's offset is +46. Otherwise PCD of both cars is same.

[a4anurag]

Hyundai Creta

Center Bore: 67.1 mm

Tyre size - 205/65 R16 95H
Rim - 6Jx16 ET43
PCD - 5 x 114.3

Tyre size - 215/60 R17 96H
Rim - 6.5Jx17 ET49
PCD - 5x114.3

SOURCE

[albertprince]

Hello Guys,

I have a Honda BRV S variant. I came across a Duster OE 16 inch alloy wheel online. A friend of mine who works in automotive industry told me to make sure that the Caliper is having sufficient clearance with the alloy.
Attaching the specs of alloys for both the cars. Have anyone come across the caliper clearance factor while searching for alloys? Can I go forward and purchase the rims?Please note that I do not have an option to go to the seller and check the fit.

[viXit]

Good evening,

In a bit of a situation here family was out on a trip and the tyre has burst and the Stepney is gone too.

Family is in a Honda amaze. Old one the initial model.
We have a grand i10 which has matching size wheels only the wheel width is different.
The bolt pattern according to a website is same.
And the PCD is also same.
Only the center bore is different

If someone is seeing this. Could you pls help.
Because if possible we will take the Stepney from the grand i10 and fit it to amaze and bring it home.
The 2015 grand i10 has Hyundai oem alloy wheels (2015 grand i10 AT)
And the Honda amaze has the steel wheels from factory.
Attaching picture from a website which is the source of my knowledge.

[kpzen]

Originally Posted by viXit

Good evening,

In a bit of a situation here family was out on a trip and the tyre has burst and the Stepney is gone too.

Family is in a Honda amaze. Old one the initial model.
We have a grand i10 which has matching size wheels only the wheel width is different.
The bolt pattern according to a website is same.
And the PCD is also same.
Only the center bore is different

If someone is seeing this. Could you pls help.
Because if possible we will take the Stepney from the grand i10 and fit it to amaze and bring it home.
The 2015 grand i10 has Hyundai oem alloy wheels (2015 grand i10 AT)
And the Honda amaze has the steel wheels from factory.
Attaching picture from a website which is the source of my knowledge.

It will work you can swap the wheels.

[viXit]

Originally Posted by kpzen

It will work you can swap the wheels.

Thank you so much for the help.

I didn’t realise how many people come here for advice like this haha.
You seem to be quite the saviour for many.
Thank you once again

[sagwal]

T Roc 1.5 TSI Evo

PCD 112 mm
5 Lug Bolts
Center Bore 57.1 mm
Thread Size M14x1.5
Tyre Size - Rim Size

215/55/R17 94V -7J x 17 ET45

[ManneAtWheelz]

Saw this site very recently and it has quite a collection of alloys and tyre size suggestions too, felt fellow BHPians will be benefitted so sharing this information here.Tyre Size & Alloys

[mr_tallguy]

Hey guys, wanted to know the PCD of the Nissan Magnite.
TIA

[Sajimu]

Originally Posted by diven_b

corolla....4 bolt 100pcd

Do u have any idea about the CB?

[Sajimu]

Originally Posted by tyrestore

i am a tyre dealer in chennai, i do have the entire list of PCD's for diffrent cars, let me know if you require any of then in specific

I need the pcd and cb for Toyota corolla 2005 9th gen