Modifying my Alto VXI 1.1 Alloy Rims and Tires

VJ_MAVRICK · 5th July 2007, 15:54

Nay "styles" talked to viper actually a couple of days back as well on this but still contemplating ...and since 8:30AM ...still in office dude...maybe you had seen some one else cos my baby is taking a nap while am working

Akshay1234 · 5th July 2007, 20:03

Quote:

Originally Posted by VJ_MAVRICK

Hey Knighty...hope ffe does not change the overall dynamics and affect the engine right? i dont want or for that matter anyone .....the negine to be affected...your thoughts and inputs on this..

believe me. there is a noticeable increase in power and peppiness of the engine.

nikhilv12 · 5th July 2007, 20:09

Quote:

Originally Posted by Sankar

Dont bother Xinome's exhaust is for the 3 cyl Alto it will not fit the 1.1.

Xinome's exhaust is actually made for a 4cly engine, it was being used on a swift earlier.

Knight Rider · 5th July 2007, 20:29

Quote:

Originally Posted by VJ_MAVRICK

Hey Knighty...hope ffe does not change the overall dynamics and affect the engine right? i dont want or for that matter anyone .....the negine to be affected...your thoughts and inputs on this..

Dynamics, I am not sure?? Nothing will happen to the engine, However the warrant would be void if you put FFE..

I am sure viper would be able to customise the FFE as per your needs, Have a chat with him and he will be able to help you, He is one of the best in the industry....

VJ_MAVRICK · 5th July 2007, 21:44

hey fellas ....as am still contemplating how about "Automech's FFE" heard that it too suits well for small cars like mine (alto vxi 1.1 ..4 cylinds)...Any comments?

Akshay1234 · 5th July 2007, 21:46

Quote:

Originally Posted by VJ_MAVRICK

hey fellas ....as am still contemplating how about "Automech's FFE" heard that it too suits well for small cars like mine (alto vxi 1.1 ..4 cylinds)...Any comments?

heard about bad finish from them.. but their ffe are supposed to be good.

VJ_MAVRICK · 5th July 2007, 23:31

Quote:

Originally Posted by akshay1234

heard about bad finish from them.. but their ffe are supposed to be good.

Bad finish .....did not get you dude ...overall is it fine for installation or not...and it would be under the body too anyway...

Akshay1234 · 6th July 2007, 12:21

Quote:

Originally Posted by VJ_MAVRICK

Bad finish .....did not get you dude ...overall is it fine for installation or not...and it would be under the body too anyway...

i have read on this forum that their installation is not good.

Knight Rider · 6th July 2007, 12:31

VJ, You will hear both good and bad reviews from this community because of the sheer size of the people involved

As far as possible, try to get reviews from people who have actualy tried the products from the respective vendors, This will help you to make an informed decision.

Also please read my post - Your warranty would be void after fitting the FFE...

rjstyles69 · 6th July 2007, 13:11

Get in touch with vikram_d .PM him, he should be able to guide you. He has used it for quite a while now and should be able to give you details.

Till yesterday the man was using an Automech FFE on his Swift

.

n_aditya · 6th July 2007, 13:30

Quote:

Originally Posted by rjstyles69

Till yesterday the man was using an Automech FFE on his Swift.

What's he running now? Back to stock or better set of headers?

I hope its the latter.

rjstyles69 · 6th July 2007, 13:36

Went in for a complete make-over from " you know who"

.

Mavrick I think the only place in town from whom you can source Automech FFE is from Pro-Drive.

Dig around there is a thread about Automech FFE dealers in bangalore.

VJ_MAVRICK · 6th July 2007, 14:19

Quote:

Originally Posted by rjstyles69

Went in for a complete make-over from " you know who"

.

Mavrick I think the only place in town from whom you can source Automech FFE is from Pro-Drive.

Dig around there is a thread about Automech FFE dealers in bangalore.

@ styles........yea sure styles..i will dig a bit and moreover am planning for the meet anyways...so anyways u guys would be around and that would be a great interaction.....

@Knighty......yea knighty..i agree that every one has their own set of experiences...and definitely will exhaust myself a bit on this and then plan...just on the other day i did it for my footwear...the geeko i am...would get up one morning and will get it done some time

..so u joining us knighty for meet....

rjstyles69 · 30th September 2007, 14:48

*** bump***

Did she get pimped ? Any updates on the FFE part ?

desigNation · 30th September 2007, 19:18

mavrick-any new changes on the looks part?

5th July 2007, 15:54	#46
VJ_MAVRICK Senior - BHPian Join Date: Jun 2007 Location: Sydney Posts: 1,239 Thanked: 34 Times View My Garage	Nay "styles" talked to viper actually a couple of days back as well on this but still contemplating ...and since 8:30AM ...still in office dude...maybe you had seen some one else cos my baby is taking a nap while am working
	() Thanks

5th July 2007, 21:44	#50
VJ_MAVRICK Senior - BHPian Join Date: Jun 2007 Location: Sydney Posts: 1,239 Thanked: 34 Times View My Garage	hey fellas ....as am still contemplating how about "Automech's FFE" heard that it too suits well for small cars like mine (alto vxi 1.1 ..4 cylinds)...Any comments?
	() Thanks

6th July 2007, 12:31	#54
Knight Rider BHPian Join Date: Oct 2005 Location: Bangalore Posts: 282 Thanked: 28 Times	VJ, You will hear both good and bad reviews from this community because of the sheer size of the people involved As far as possible, try to get reviews from people who have actualy tried the products from the respective vendors, This will help you to make an informed decision. Also please read my post - Your warranty would be void after fitting the FFE...
	() Thanks

6th July 2007, 13:11	#55
rjstyles69 Senior - BHPian Join Date: Sep 2006 Location: Bengalooru.. Posts: 4,343 Thanked: 842 Times View My Garage	Get in touch with vikram_d .PM him, he should be able to guide you. He has used it for quite a while now and should be able to give you details. Till yesterday the man was using an Automech FFE on his Swift .
	() Thanks

6th July 2007, 13:36	#57
rjstyles69 Senior - BHPian Join Date: Sep 2006 Location: Bengalooru.. Posts: 4,343 Thanked: 842 Times View My Garage	Went in for a complete make-over from " you know who" . Mavrick I think the only place in town from whom you can source Automech FFE is from Pro-Drive. Dig around there is a thread about Automech FFE dealers in bangalore.
	() Thanks

30th September 2007, 14:48	#59
rjstyles69 Senior - BHPian Join Date: Sep 2006 Location: Bengalooru.. Posts: 4,343 Thanked: 842 Times View My Garage	* bump* Did she get pimped ? Any updates on the FFE part ?
	() Thanks

30th September 2007, 19:18	#60
desigNation BHPian Join Date: Dec 2006 Location: calicut Posts: 661 Thanked: 51 Times View My Garage	mavrick-any new changes on the looks part?
	() Thanks