Team-BHP
(
https://www.team-bhp.com/forum/)
- -
silencer got a crack
(
https://www.team-bhp.com/forum/modifications-accessories/23362-silencer-got-crack.html)
hi guys, i have an OHC and recently on a journey i happened to get down the road when a mad lorry driver was coming straight towards me without getting down the road a bit, as it was a single lane road, and in this there was some collision under body which i could hear. and i stoped and saw underbody, the pipe from the engine and some where near the rear door was bent down and had developed a crack and the car now sounds wierd.so wat do u suggest? shud i need to change the complete set up from the engine or just will be fine if welding is done.
waiting for replies.bye
i dont think welding is recommened its better u change it.......
You should get it checked from the silencer repair shop, they will be able to tell you if a repair will suffice, else you go ahead and change the pipe.
get it inspected, if its a small dent and tear weld it or better get it replaced. while inspecting the pipe ask the workshop to just ensure rest is all well down there
thanks guys , i will get it checked, and if at all its a small one then repair else it will be replacement right.
Quote:
Originally Posted by sankeerthreddy
(Post 419338)
thanks guys , i will get it checked, and if at all its a small one then repair else it will be replacement right. |
That is correct, if you repair a rather bigger gash then chances are that it will open up again sooner or later, which is not cool.
by the way guys , how much do the free flow cost? does it include the set up from engine to tail.
Quote:
Originally Posted by sankeerthreddy
(Post 419368)
by the way guys , how much do the free flow cost? does it include the set up from engine to tail. |
I am to waiting for ma silencer to give up
a freeflow will cost 9k without the headers that the price in chandigarh
closer to 12 with headers-custom made
hey guys , i just got checked the underbody of the car, evrything is fine except the centre muffler and its pipe got a hole or let me say it got torn, so had to replace it, it costed me 2000rs for the centre part of the exhaust system.
All times are GMT +5.5. The time now is 09:39. | |