Team-BHP (https://www.team-bhp.com/forum/)

-   Motorbikes (https://www.team-bhp.com/forum/motorbikes/)

-   -   Super charged Fiero (https://www.team-bhp.com/forum/motorbikes/35049-super-charged-fiero.html)

Did a raw run on fiero and expectedly has carburettion issues.Presently it is mounted on the magnet cover and is a roots type.Once other issues are sorted ,will check the boost.This was made to bench mark so as to get a relation between swept volume and the engine size to the boost pressure.Once done the later ones will be screw type and will be mounted in place of the air box.
cheers
enginehacker

did you really try this??? I had a ride on a RX 135 long time back [ I think it was 95-96] with some thing like this...... my friend had done it after reading in a Mag.... it was one awesome bike... pics please......

Superb Venu , its complete ? . Wow ,can only imagine how much work and sweat has gone into it .Need a test ride like last time on V twin .
Will drop in some time , is the fiero at your place ?

Hello venu sir it's nice to see you here on this forum. well i would like to visit your place and check it out. pm"ed you reply back

Cool Venu.. Nice to hear that its running now.. So finally sorted out the gear issues! :) I will drop in this evening or tomorrow!

Cheers!

Doing on behalf of EngineHacker!

it looks good... you should get it dynoed... so planning to to use a belt drive now for relocating the system? Be careful this type of setup tend to create imbalance no the crank at least it on the yamaha, I don't about fiero...keep up the good work, and keep us posted, would like to do something like this to a pulsar when I get time...

Venu Gopal at his best.. First the twin cylinder and now this. clap:

It will be hydraulically driven ,so no issues.
cheers
EH

Congrats on the new set-up mate! btw, u bored out the engine?? 197cc??

It was bored out 2 years ago.
cheers
EH

Superb Job Venu. Got some questions for you.

• Why not leave the carb in its original position and feed the supercharged air into it. In your setup you are running fuel into the supercharger !!!
• What boost did you plan for and what are you achieving.
• Is that a flex pipe from car exhaust you are using.
• Dosent Hydraulic drive system have a lot of losses. Can it handle 7000 rpm?

I was discussing options of supercharging a 600cc and everyone just turned down the idea.
This is good news,venugopal.Thumbs up.
But, one thing, can u dyno this and post the map here?

Hey Venu, Congrats buddy you made it. sort out the issues soon, I'll see you some time next week, remember me gautam, I've visited your place a couple of times. ALL THE BEST.clap:

CHEERS,
G D