Team-BHP
(
https://www.team-bhp.com/forum/)
Hi all,
After a lot of research and ofc 100% TBHP inspiration and help, I started my first ICE DIY. Today I have replaced the fake damn power cables of my Blau PA275 amp which is powering my Blau GTb1200 sub box. The result is amazing.
The sub is performing as if it has got a new life. Exactly like someone was strangling it's neck till now and released it. I had to change some setting of my HU to make the sub calm down :). I think I have now to play with gain control too (decrease a little bit and set it properly). For those who are using fake cable (boss,.. etc) please burn that stuff and go for a good real cable.
Items used - Finolex 16 sqmm (8ga) wire, 3m for power, 0.75 m for grnd. Copper leg and connectors. Plier and hammer for leg fixing. Time took was 2hrs and 30 mins. Grnd is connected to seatbelt bolt. Some pics of cables tools here. See the "8 Guage Power Cable" written on that and compare it with the real 8 ga cable :Shockked:.
Waiting for other components to come to start remaining work.
Whoa nice congrats :D
when will the damping be in town ?
Quote:
Originally Posted by greenhorn
(Post 832574)
when will the damping be in town ? |
Expecting it with in 2 days. Intitially it is only 20 sqf, for front doors. Will sure call you when I start working on it.
Great work RedFire!
And what a difference between the two 8G power cable! Man, that crazy!!!
All the best and do keep us posted.
Finolex aur DIY zindaabaaaD!
Good stuff redfire!!
Nice pics Jay. Where in TVM are you? I would like to see your work :D
Hey nice work.. But which car you working on? :)
Great stuff! :thumbs up Next you may like to do the Big3 upgrade.
Quote:
Originally Posted by srijit
(Post 832642)
Nice pics Jay. Where in TVM are you? I would like to see your work |
See my work?!! hehe. Its not a great work, but first DIY. But not bad too :). I am at Golf Links, Kowdiar. PM me, or arrange a Tvm meet. I think it's been long time.
Quote:
Originally Posted by gunbir
(Post 832698)
Great stuff! :thumbs up Next you may like to do the Big3 upgrade. |
Thanks Gunbir, and thanks all. Yeah planning the Big3 too. But the very next thing is my second amp which is powering comps. Let me see if I can complete that tomorrow.
Today morning I completed power cabling of amp # 2, JBL GT5-A402, which is powering my JBL GTO607C comps. Like yesterday, today also I got blessed with a good result and neat, powerful output. I had to adjust the gain a little lower to match my rear co-axs (driven by HU) to sound as fillers. With initial setting, at first front sounded very high. That proves with adequate cable, amp get more juice and need little effort to push its power. Items used are exactly same, finolex 8ga cable - 3m for power and .5m for grnd.
One funny thing happened which made me panic for a while. The front comps wer not playing just after the install and powered on the system. I checkd the amp, light was glowing, protection was switching to power LED in 2-3 seconds as normal and all other cables (RCA, speaker out) were fine. Then my finger accidently touched the HPF-FlatLPF selector and everything was back. The selector switch was stuck somewhere between two settings and output was cut. Here are some pics.
Cable with insulation removed
Attach the leg
First 'plier' it and then a little bit of 'hammer'
cable is ready
My co-installer. Had a very hard time controlling this installer from running around the car and 'installing' various things:)

Excellent work . clap:
Ill be starting the same DIY today and this thread was just what i needed!!
One question though : Is 16 sq mm = 8 AWG ? I thought it was 10 sq mm.
Quote:
Originally Posted by adityamunshi
(Post 833089)
One question though : Is 16 sq mm = 8 AWG ? I thought it was 10 sq mm. |
You are right. 16 mm sq is actually 6 AWG and 10 mm sq is 8 AWG. Thanks for pointing this. But I think local electricians and electrical shop guys refer it their own :). Whatever it is I planned for 16 sq mm wires and did it (never bothered the AWG as mm sq is what matters here in India). I think for the comp amp even 8 AWG (10 mm sq) will work too. Plan accordingly to your amp power / capacity etc. LBM and Sam has given a detailed explanation on this in another thread which i referred a lot (
http://www.team-bhp.com/forum/diy-do...ick-wires.html).
clap:Fantastic job, Jay! We can almost hear the improvement by your description. Keep up the good work, it is inspirational / instructional for many.
BTW, is "leg" related to "lug" the same way as "Gelf" is related to "Gulf"? (Apologies, please don't be offended, I'm just pulling your "lug")
It can also be called Hole Type Thimble.
Quote:
Originally Posted by DerAlte
(Post 833129)
clap:Fantastic job, Jay! We can almost hear the improvement by your description. Keep up the good work, it is inspirational / instructional for many. |
Thanks DerAlte and all. I got inspired and instructed from Tbhp only (many thanks to you Gurus) and thought would share the same in return.
Quote:
Originally Posted by DerAlte
(Post 833129)
BTW, is "leg" related to "lug" the same way as "Gelf" is related to "Gulf"? (Apologies, please don't be offended, I'm just pulling your "lug") |
Hahaha :uncontrol. Thaks for correcting me. Yes what I meant is lug wonleeee
Now I really feel the need of damping. Waiting for my kit to arrive (RCAs, speaker wires and damping for front doors). Next DIY will start soon, keep watching guys.
All times are GMT +5.5. The time now is 22:42. | |