Team-BHP - The Home Appliance thread
Team-BHP

Team-BHP (https://www.team-bhp.com/forum/)
-   Gadgets, Computers & Software (https://www.team-bhp.com/forum/gadgets-computers-software/)
-   -   The Home Appliance thread (https://www.team-bhp.com/forum/gadgets-computers-software/23174-home-appliance-thread-717.html)

Quote:

Originally Posted by 1.2GT3GT (Post 5974177)
Thank you, I will start by checking the heat retardant ratings.

Here are some links that may interest you

https://www.habia.com/en/knowledge-h...he-difference/

https://www.finolex.com/ProductPage/SubCat/House-Wires

https://www.plazacables.com/product-...php?product=24

Quote:

Originally Posted by srini1785 (Post 5974164)
In addition to what has already been mentioned by many BHPans, i Just want to add that US generally uses a 110V , 60HZ system while we use a 230V , 50HZ system. While a transformer can step down volts, it can not change the Frequency. So there will be some kind of humming noise when you use it with a transformer.


Transformers are prone to humming on their own (even without load) due to magnetostriction and other reasons. I am puzzled: how does frequency difference cause hum ?!

Frequency difference can, of course, affect clock and motor speeds and such. The 60 Hz appliance the OP is planning to use, would run slower at 50 Hz if it has a motor. Whether that would still be within acceptable limits, only he can decide.
.

Quote:

Originally Posted by meerkat (Post 5974415)
Transformers are prone to humming on their own (even without load) due to magnetostriction and other reasons. I am puzzled: how does frequency difference cause hum ?!

Frequency difference can, of course, affect clock and motor speeds and such. The 60 Hz appliance the OP is planning to use, would run slower at 50 Hz if it has a motor. Whether that would still be within acceptable limits, only he can decide.
.

The transformer will work fine. It is the device that might be affected. The capacitive and inductive resistance (or reactance) are related to the frequency.

Capacitive resistance = 1/ C*2*Pi*f, Inductive resistance = L*2*Pi*f (f is frequency)

So if this device (of which i am not aware fully) runs on AC then the internal device resistances are affected. The increased hum will be from the device.

Quote:

Originally Posted by Prowler (Post 5973462)
I used to source Shaw transformers for US made microwave ovens a long time ago.

Quote:

Originally Posted by rajesh1868 (Post 5973528)
Any recommendation for a good BLDC ceiling fan? Had seen some earlier posts on issues with Atomberg. Is it still good? anything to watch out for?

We have 11 Atomberg ceiling / wall fans with a mix of IoT and remote controlled ones, and they are pretty reliable and classy too. Only thing to note is that the 1200mm blades don’t have a great throw. The 1400s are better.
Quote:

Originally Posted by ads11 (Post 5973540)
Turns out it's a bit of a mixed bag..
Still, well done you for even thinking of composting. If that is what you're doing, composting food waste?

Food only but ditched the plan now.
Quote:

Originally Posted by meerkat (Post 5973623)
You should be able to source one easily in Bangalore
.

Quote:

Originally Posted by Aroy (Post 5973758)
I suggest that you get the second type. Just be sure that there are two coils and not the run of the mill auto transformer type.

Quote:

Originally Posted by srini1785 (Post 5974164)
While a transformer can step down volts, it can not change the Frequency. So there will be some kind of humming noise when you use it with a transformer.

Quote:

Originally Posted by meerkat (Post 5974415)
Whether that would still be within acceptable limits, only he can decide.
.

Quote:

Originally Posted by srini1785 (Post 5974431)
The increased hum will be from the device.

Chickened out of the plan for now. Many many thanks to all of you for the tremendous input though!

Quote:

Originally Posted by itwasntme (Post 5974462)

Food only but ditched the plan now.
Chickened out of the plan for now. Many many thanks to all of you for the tremendous input though!

Was gonna say, if it's food waste only you want to deal with and want minimal hassle there might be a solution.

Do you have access to an outdoor garden? We've gone for a low effort solar solution. A green cone:https://greatgreensystems.com/produc...5s-y49FpJbMS9R. Bit of a pain needing to dig a deep enough pit to get the basket bit sufficiently low enough that it becomes harder for vermin to get at it. It's great in that it can pretty much take all food waste, including fish and meat bones. I'm sure there must be similar solutions available in India. If not, it's really simple as a contraption. ABS plastic basket that uses some washers to connect to the above ground plastic cone, it too made of plastic, and then that's it. Got a little twist locking latch for the lid.


All times are GMT +5.5. The time now is 07:20.