Team-BHP (https://www.team-bhp.com/forum/)

-   Gadgets, Computers & Software (https://www.team-bhp.com/forum/gadgets-computers-software/)

-   -   The Home Theater thread (https://www.team-bhp.com/forum/gadgets-computers-software/8056-home-theater-thread-178.html)

hmm...well actually no. In both systems my wife and the "interior experts" she hired made a mess and I then had to fine tune the systems to make the best of a bad situation. The other choices were to either buy another apartment (too expensive given Mumbai's real estate prices) and live separately or ask my wife to leave (even more expensive and I cant boil an egg leave alone cook so I need her around). LOL.

In the bedroom I actually had to dummy one woofer and pad the pass port. I had way too much bass. Fortunately the crossover network I designed was able to accommodate these changes.

In the living room system I had to redesign the center channel. Don't even ask. Yes those are Excel drivers (slightly customized by SEAS for me) and Fountek's Neo 3.0 ribbons.

I am not very active in audio now. My most active years were around 77-95. Most of my audio friends are dead or not in good health.

Right now, only the Polk 440T.

ProFX was suggesting the 'Denon AVR-X520BT'. Is that a good match for my 440s?

You are crazy, man...absolutely crazy (in a good way).

It looks like this is Denon's entry level unit, and makes about 70Wx5, but doesn't say if the rating is driving 2 channels or all 5 at once, so may end up being under powered if you really like cranking the volume. An under powered amp will almost guarantee a blown tweeter with the volume turned up.

I would ask them to setup it up in their showroom with a demo pair of T440's and reasonably power hungry center and surrounds they have. Hear them at a normal volume and also at the max level that you are comfortable with, and judge if you are happy with the sound quality at both levels. You really don't want to be stuck with an amp that works best with your speakers at ear shattering levels and does nothing for you at a moderate volume.

Next, I would then ask them to connect something with a higher power rating and do the same experiment until you come to a point where you are happy with the quality and quantity of the sound. It really comes down to a method of elimination if you think about it.

The other variable that comes into play is the brand. Denon, Yamaha, Onkyo, Pioneer, Sony would probably be considered on par, and the Marantz and NAD would be higher up the chain which going by reputation should be better + more expensive.

Lastly I would ask them for a demo at home with the amps + speakers that you have shortlisted.

Always listen to music or DVD tracks that you are familiar with and use the same tracks when you are doing your comparisons.

Cheers, and good luck.

The rated power for the X520BT is only 70W and for two channels only.
I wouldnt recommend this or anything in this range at all.

Amplifiers should be FAT. - No Substitute for Displacement - Likewise - No Substitute for Power.

And the X520BT is like very small.
Also - it doesnt have Pre Outs - to take the speaker signal out and feed it to an Amplifier.

My suggestion for you would be to buy an AVR either 5.1 or 7.2 with whatever features you need. This should have a FULL SET of Pre Amp Outs.
Usually When you do this, chances are you can at least power your main speakers through them.

Would recommend a minimum of 150 - 200 Watts / Channel - at least for 2 channels. - This is not available in the regular brands which market AVRs.

AND then buy ONE good Stereo Amplifier - This will work out cheap and also give you power.

So the front and center channels are driven by the AVR and the rear channels are driven by the stereo amplifier.

After reading so much here. I am also buying Polk speaker. I am planning to order it from ebay seller cart2india, he is selling it for 32k.

http://www.ebay.in/itm/Polk-Audio-TS...IAAOSw6n5XvTVe

In ebay it is mentioned "All electronic/electrical items sold by us are originally meant for use in the USA (110 volt AC input). For usage in India, a step down converter should be used in order to bring down the voltage from 220/240V to 110V. We will not be liable for any electrical damages, failures, loss of performance of such products and/or their accessories. Laptops, Mobile phones, Tablet PC (iPad, Kindle etc) come with a universal 110v-220v charger that can be used worldwide."

GTO, Navin - The one you guys bought also had 110v USA adaptor ?

Is there any warranty given by seller on the speakers which you bought ?

My 2 paisa to complete your 5.1:

• Receiver/Processor: Denon AVR-X2200W

• Power Amp: - Postpone for now.

Get the basic rig up and running. Get a feel of the sound signature and then decide whether you really need the power.

• Center: Polk TSX250C

• Rear Surrounds: Polk OWM5 (On a budget) OR Polk TSX110B

(No point putting in too much money on rear speakers. They are mainly for the wooshes and hooshes)

• Sub: Polk DSW PRO 550

(If not in a rush, delay this one too. Get a feel of the kind of Bass your 440 are producing, then decide on the Sub to compliment them. You would want to have nice tight deep bass and not a constant boom in the room over powering everything else)

You should be able to get all these from Pro Fx with a neat 15% min discount on the list price.

Other brands to consider
Receiver: Marantz
Speakers: Dali Z1/Z3, KEF Q300, Q Acoustics 3020/Concept 20 and
SUB SVS

Also to consider the acoustics in the room. They do help with cleaning up the sound waves. ProFx should be able to advice you on that. Do avail of their Home Demo facility to audition.

:thumbs up
MaSh

Thanks!

Thanks!

Don't want to over complicate the setup. My Civic had multiple amps and all, and I didn't enjoy the resultant work / tuning / things going wrong.

Would like to have just one AVR.

That's more expensive than ProFX. Note that the price quoted on that page is for ONE speaker :).

Thanks! Will check these out.

Think of your audio system as your amp is the engine, the speakers are the chassis. You can't use a 800 engine to efficiently drive a Honda City can you?

I would recommend something like the Denon 1520 if you are looking at 2.1 without all the Video processing, HDMI, Dolby digital stuff or Denon 2200/2300 in you want all the Dolby digital, HDMI, video processing stuff. Think 100W rms ( less than 1% THD, 20-20k at least 2 channels driven).



This is exactly what I have done.

Perfect.

GTO you are stuck with getting a Polk 250C for the center.
Surrounds you can still chose something cheaper or different.

Receiver options: Denon, Marantz, NAD, Yamaha, Onkyo - I wont name models because everyone has a AVR in this price (competing with the Denon 2200/2300).
Subwoofer options: I would look at REL, SVS, Velodyne, etc. I think Klipsch, Polk, and a few others also make subwoofers but they are not in the same league as Rhythmic, REL, SVS, Velodyne etc.
http://avenuesound.in/home-theater-a...dio-lv12r.html
http://www.amazon.in/REL-Rel-T-Zero-.../dp/B00OA9GQWI
http://htstore.in/index.php?route=pr...product_id=332
http://htstore.in/index.php?route=pr...product_id=340
Recently (about 3 months ago) bought the REL T7i which has an MRP of 97k for a friend. Can find out the current pricing.

The route mashmash has suggested makes the most sense.

The one thing I would add is, keep a small budget for a nice servo stabilizer if you want to keep all your equipment safe and sound.

Hi, Need your help. Please let me know from which showroom you bought speakers. I want to cut bargaining by giving your reference :D and buy it at 36k.

Also compromising on Amp and for now buying Yamaha HTR 3067. My initial budget was 25k for 5.1, but when I googled, google took me to team-bhp. And many thanks for pointing out ebay deal, 32k was only for single speaker.

My 2 cents. Please always buy an AVR with pre-out so power amplifier can be added at a later stage. Also spend most of the money on centre speaker and sub-woofer as they convey most (~80%) of the sound information. For sub woofer, a non ported design would be nice for small rooms.

As with cars, home theatre can be addictive. So urge to upgrade can happen. Please audition multiple brands for sound signature before finalizing. An entry level Dynaudio (even used) could also be a good option.

Anyone here tried the front presence speaker setup. Is this better than adding rear surround?

I have the 5.1 set up done and have ordered for two additional mountable book shelf speakers that I can use in three different ways

1. Add as rear surround to make it a 7.1
2. Add as front presence to make use of ProLogic front height effect
3. Add as front ATMOS speakers

I would hold the #3 as the media availability for ATMOS is still sparse.

Between the #1 and #2, I am confused when when to go with.

My receiver is Yamaha RX-A2050 and projecting with Sony VPL-HW40ES.

A lot of this depends on the room shape and size and where the listeners are.

For example if you have a long room with the front speakers along one of the short walls (this is what I have) having 2 extra rear speakers helps distribute the sound better. If on the other hand your speakers are along the long wall then maybe adding height makes more sense. (I have never used this so am just using an educated guess).

Also it depends a bit on the type of rear speakers you are using. Monopole, Bipole or Dipole. Bigger rooms work better with monopole surrounds (my room is 12' x 30' and I use monopoles). Bipole speakers make smaller rooms feel larger acoustically. And Dipole diffuses the sound even more (as the drivers are out of phase) and unless you have a specific need for Dipoles my advice is stay away. In this day when you have 5-7 discrete channels of sound there is not a huge need for dipoles.

Hope this helps.

Had a talk with friend who is having knowledge about HiFi systems. He explained me a lot and clearly mentioned if the inputs are not good, I will not get the sound out of any speakers. Also he mentioned that there are compatibility when it comes to selection of Amp and CD player. Few AMP/CD Player works well with few combination of Speakers. So before selecting any Amp/CD Player, I need to lookout for what is the best matching for PolkAudio 440T. So if anyone suggest budget 2.1 channel amp and budget CD player, which will match the 440T speakers, will be helpful.

The smallest amp that I know of that has pre-outs and can drive the 440 is the Denon 720. (remember I said "that I know of").

PS. I am not part of this industry and models change every 2 years or so. There is no way I can keep track of current all models and prices.

Also the 720 has full range pre out so your subwoofer will have to be active and have a crossover and plate amplifier. Don't worry, most do. The 440 will receive full range sound but you can turn the bass control (on the 720 or which ever 2 channel amp you buy) back a notch since you will have a subwoofer augmenting the bass.