Team-BHP (https://www.team-bhp.com/forum/)

-   Modifications & Accessories (https://www.team-bhp.com/forum/modifications-accessories/)

-   -   Modding an Alto (https://www.team-bhp.com/forum/modifications-accessories/37446-modding-alto-4.html)

Plati, HR, League, Eagle, ST, Neo are the ones you will find common.

I would say if you are going for alloys try to stick to 13" and 5J width but if u cant find good 5J width rims in 13" then go for 5.5J but keep the tyre size to 155/70/R13 or 155/65/R13 otherwise the tyres will scrap as rim width is more.

hey guys can you give me the official websites of plati alloys and hr alloys....i tried googling them but they didn't work...?? thanks in advance...

I dont know PLATI website but here are the following ones.

HR/HI-Join
¦X´¼¤u·~ªÑ¥÷¦³**¤½¥q

League
LEAGUE Alloy Co., Ltd

Neo Wheels
Neo Wheels India

Aura Alloy Wheels
http://www.auraalloywheels.com/

Automech FFE kit costs 4500Rs right? It was 2 years ago. Can someone update about this.

5500/- is the kit cost. with discount u can tap it around 5000 rs

hey abhibh...those websites of those alloys were very very useful mate...thanks..but i want to know the approximate cost of the alloys ?? i cant spend more than 15k alloys that's reason...

@amit_mechengg
what alloys do you have pal and what is the approximate cost ?? pl give me some good suggestions with prices...??

almost all alloy makes and design for alto you will get within 15k, except OZ.
i still havent put any alloys. i am waiting for the tyres to wear out. then i will change both rims and wheels. i dont have funds right now.i spent it on ICE.
but i would suggest you plati. HR are also good. but people have suggested me go for 13" and 5j instead of 5.5 J as they scrap with full load in alto.
if u are planning for the tyres change too like i am planning then i think you should hunt for low profile tyres on 13" alloys so that they dont scrap. also they look good.

thanks a lot amit_mechengg...and i also want to know which part of the exhaust system determines the sound of the gases leaving the vehicle ?? thanks in advance..

i think its mostly the muffler and the end can.

Hey guys,

I want some info on changing the air filter in my car. I am not sure how to go about it...do i go for stock replacement or something else?? and what about the difference in the air intake? will the ECU have to be set up accordingly?

And the FFE, will it be loud that it might be disturbing on long continuous drives??

I'm not happy with the power of Alto-(800cc)when the AC is on.I always try to manage to switch-off the AC and use but @ time i can't resist to ON,is there any alternative for this....

hey guys performance mods aside..i'm now looking for a good steering wheel other than the stock one in chennai..do you guys know where i can get one ??

Hi Ramsagar,
You are right. It’s very difficult to drive Alto with A/C especially in city traffic. From dealers I came to know that Alto has the powerful A/C in the segment [no idea about the exact specification], so it sucks more powers then the other.
Recently I replaced stock air filter with K & N air filter. It is comparatively better now.

hey guys please help me gonna do it urgently !

I have the VXI version 1.1 Alto that has VIPER FFE installed along with conical filter. You can try to source through our own team bhpian viper (jignesh) if you want to consider FFE options other than automech. so are you planning for 3x1 headers or the popular 4x2x1?