bullet 2 chopper

xtreme power · 27th August 2006, 19:56

hey guys..
need some help here...
my cousins brother's 21st birthday is just around the corner..
hes a guy who loves modded bullets..
was planning to gift him a bullet..
but i wanna buy a second hand one and get some descent modification work on it....
basically want 2 covert it into a chopper..
one problem was i read that some of mumbai chopper bikes had ome problems because of chassis modifications etc..
i want no such problem cause he wont be able to handle it.....
so here goes..i want to know gaages or mechanics who would help me in such a transformation......
dont really wanna go to expensive..and yes how much would a descent second hand bullet cost me...
thanks will be in town soon so would appreciate early replies...
Thanks a ton

ALLAN ALMEIDA

condor · 27th August 2006, 20:03

XP, a search before posting often helps. Here's a recent thread: http://www.team-bhp.com/forum/indian...hlight=chopper

xtreme power · 27th August 2006, 20:19

Quote:

Originally Posted by condor

XP, a search before posting often helps. Here's a recent thread: http://www.team-bhp.com/forum/indian...hlight=chopper

dude very frankly...that topic is really offtopic considering what im lookin for..

all i said was i wanted some info on modifiers...just never wanted to get into such s**t....
so guys can i please have some suggestions .....

condor · 27th August 2006, 20:26

XP, I know that that particular thread doesnt have much details about modifiers. It was more to point to choppers not being street-legal.

manson · 27th August 2006, 21:13

Long long back V12 had posted picks of a really well modified bullet, done by someone in versova. leave him a pm, i'm sure he could get you the contact details.

manson.

2fast4u · 28th August 2006, 13:09

if u need a contact in Pune then theres Aatish off Karve Road near to Abhinav Vidyalaya and he does the bike just too good.
hes done a recent mod using the unicorn suspension and the bike looks awesome. he can get u twin exhausts with the dummy pipe looking perfectly connected to the block. no cheapo stuff.
nice neat fenders,
hes done a springer too.

but he needs time atleast 3 weeks for 1 bike to get customised from full strip. the mods depend on ur budget and ur taste.

i can give u his exact location but i dont have a contact number with me now.

also he will tune it for u and rebuild complete engine, if u need engine mods like clutch, cams, oil pump he will get it done.

cal · 18th September 2006, 23:49

like said by 2fast mods will depend on your $$$ simple. A decent used bike 15 - 20G. Moddin to get the chopper would mean putting a small Enticer 16" or so tire in the back, give or take about 7G for that, add a good paint job about 4K for a nice 2K paint an Chroming another 1G, Custom Handlebars for the chopper look about 1G or so I think...give or take ya know...I wouldn't mess with the suspension..Unicorn is a light bike...Enfield is heavy...rather get the Air Shocks which are about 1200 or so....just to give you a rough idea to get it started ya know...

a4_attitude · 8th January 2007, 19:57

Guys please post some info on Delhi modifiers who are doing bullet to chopper...
ps I also want to learn abt the problems associated with modifying bullet to chopper.
Cheers
Wadhwa Ajay

hemi · 10th January 2007, 22:58

check this site Vardenchi it you want custom made chopper.

desigNation · 11th January 2007, 09:58

hemi,jus checked out the vardenchi site, at last some 1 who does good job for bullets which is different & unique but tastefuly done too....

ron_9191 · 28th October 2009, 12:48

I suggest a cafe racer than a chopper. Contact Gordon.

lancer&shogun · 28th October 2009, 14:49

@ ron: you have opened a 3yr old thread.

@XP: Have you started this project or dropped?

Cheers,
L&S

khaleelda1 · 28th October 2009, 18:59

Quote:

Originally Posted by hemi

check this site Vardenchi it you want custom made chopper.

saw the vardenchi stuff for the first time...
really impressed, looks very professional.

any idea how much do they charge?
(a rough estimate)

Rude7 · 29th October 2009, 09:12

www.bulleteercustoms.com

orkut -

Hope this helps !

ron_9191 · 29th October 2009, 12:45

The reason I suggest a Cafe Racer is because

1. Most of the cafe racers that I have seen here (i haven't seen a lot) has "Zero" modifications done to the frame or wheelbase. Which is very good because you are keeping your bike close to stock with a few upgrades to the body work.

2. you can always revert back to stock at any point of time.

3. It is a lot cheaper than converting it into a chopper.

My simple opinion is to keep it looking stock or else do something like this

Classic White Custom 2008

I am sure it will turn heads more than a chopper.

27th August 2006, 19:56	#1
xtreme power BHPian Join Date: Jul 2005 Location: mumbai Posts: 732 Thanked: 76 Times View My Garage	bullet 2 chopper hey guys.. need some help here... my cousins brother's 21st birthday is just around the corner.. hes a guy who loves modded bullets.. was planning to gift him a bullet.. but i wanna buy a second hand one and get some descent modification work on it.... basically want 2 covert it into a chopper.. one problem was i read that some of mumbai chopper bikes had ome problems because of chassis modifications etc.. i want no such problem cause he wont be able to handle it..... so here goes..i want to know gaages or mechanics who would help me in such a transformation...... dont really wanna go to expensive..and yes how much would a descent second hand bullet cost me... thanks will be in town soon so would appreciate early replies... Thanks a ton ALLAN ALMEIDA
	() Thanks

27th August 2006, 20:03	#2
condor Distinguished - BHPian Join Date: Jun 2006 Location: Speed-brkr City Posts: 16,242 Thanked: 16,902 Times View My Garage	XP, a search before posting often helps. Here's a recent thread: http://www.team-bhp.com/forum/indian...hlight=chopper
	() Thanks

27th August 2006, 20:26	#4
condor Distinguished - BHPian Join Date: Jun 2006 Location: Speed-brkr City Posts: 16,242 Thanked: 16,902 Times View My Garage	XP, I know that that particular thread doesnt have much details about modifiers. It was more to point to choppers not being street-legal.
	() Thanks

27th August 2006, 21:13	#5
manson Distinguished - BHPian Join Date: Oct 2004 Location: Bombay Posts: 3,934 Thanked: 4,291 Times View My Garage	Long long back V12 had posted picks of a really well modified bullet, done by someone in versova. leave him a pm, i'm sure he could get you the contact details. manson.
	() Thanks

28th August 2006, 13:09	#6
2fast4u BHPian Join Date: Mar 2005 Location: pune / Bahrain Posts: 488 Thanked: 7 Times View My Garage	if u need a contact in Pune then theres Aatish off Karve Road near to Abhinav Vidyalaya and he does the bike just too good. hes done a recent mod using the unicorn suspension and the bike looks awesome. he can get u twin exhausts with the dummy pipe looking perfectly connected to the block. no cheapo stuff. nice neat fenders, hes done a springer too. but he needs time atleast 3 weeks for 1 bike to get customised from full strip. the mods depend on ur budget and ur taste. i can give u his exact location but i dont have a contact number with me now. also he will tune it for u and rebuild complete engine, if u need engine mods like clutch, cams, oil pump he will get it done. Last edited by 2fast4u : 28th August 2006 at 13:13.
	() Thanks

18th September 2006, 23:49	#7
cal Newbie Join Date: May 2006 Location: Manipal Posts: 4 Thanked: 0 Times	like said by 2fast mods will depend on your $$$ simple. A decent used bike 15 - 20G. Moddin to get the chopper would mean putting a small Enticer 16" or so tire in the back, give or take about 7G for that, add a good paint job about 4K for a nice 2K paint an Chroming another 1G, Custom Handlebars for the chopper look about 1G or so I think...give or take ya know...I wouldn't mess with the suspension..Unicorn is a light bike...Enfield is heavy...rather get the Air Shocks which are about 1200 or so....just to give you a rough idea to get it started ya know...
	() Thanks

8th January 2007, 19:57	#8
a4_attitude BHPian Join Date: Sep 2005 Location: New Delhi Posts: 508 Thanked: 101 Times View My Garage	Guys please post some info on Delhi modifiers who are doing bullet to chopper... ps I also want to learn abt the problems associated with modifying bullet to chopper. Cheers Wadhwa Ajay
	() Thanks

10th January 2007, 22:58	#9
hemi BHPian Join Date: Dec 2006 Location: Mysore Posts: 62 Thanked: 0 Times	check this site Vardenchi it you want custom made chopper.
	() Thanks

11th January 2007, 09:58	#10
desigNation BHPian Join Date: Dec 2006 Location: calicut Posts: 661 Thanked: 52 Times View My Garage	hemi,jus checked out the vardenchi site, at last some 1 who does good job for bullets which is different & unique but tastefuly done too....
	() Thanks

28th October 2009, 12:48	#11
ron_9191 BHPian Join Date: Aug 2007 Location: Toronto Posts: 390 Thanked: 302 Times	I suggest a cafe racer than a chopper. Contact Gordon.
	() Thanks

28th October 2009, 14:49	#12
lancer&shogun BHPian Join Date: May 2008 Location: Back in Chennai Posts: 148 Thanked: 2 Times	@ ron: you have opened a 3yr old thread. @XP: Have you started this project or dropped? Cheers, L&S
	() Thanks

29th October 2009, 09:12	#14
Rude7 BHPian Join Date: May 2009 Location: Vijayawada Posts: 110 Thanked: Once View My Garage	www.bulleteercustoms.com orkut - Hope this helps !
	() Thanks

29th October 2009, 12:45	#15
ron_9191 BHPian Join Date: Aug 2007 Location: Toronto Posts: 390 Thanked: 302 Times	The reason I suggest a Cafe Racer is because 1. Most of the cafe racers that I have seen here (i haven't seen a lot) has "Zero" modifications done to the frame or wheelbase. Which is very good because you are keeping your bike close to stock with a few upgrades to the body work. 2. you can always revert back to stock at any point of time. 3. It is a lot cheaper than converting it into a chopper. My simple opinion is to keep it looking stock or else do something like this Classic White Custom 2008 I am sure it will turn heads more than a chopper.
	() Thanks