Team-BHP > Motorbikes


Reply
  Search this Thread
2,365 views
Old 12th November 2024, 18:39   #1
Newbie
 
Join Date: Dec 2022
Location: Coimbatore
Posts: 12
Thanked: 12 Times
Concerned about the idling sound from my scooter engine

I own an Access 125 bs6, which is ~ 2.5 months old and has been driven for around 3000 kms. [I will post a separate thread for the ownership review if anyone is interested]. Now, I request someone who has first hand experience with engines (or has owned an access 125 bs6 for a long time) to help me out here :



Is this idling sound normal for an access 125? Isn't there a noise indicating improper valve clearances?(The ticking noise)
The noise will start only when the engine is in the "hot" condition, after driving it for around 15-20 kms.

In the owner's manual suzuki has specified inspection of valve clearances for both the first and second services(At 750~1000 kms and ~3500 kms), but the authorized service centre is not interested in inspecting the valve clearances. The attendants there just informed me that this noise is normal and clearly no one there seems to want to inspect the valve clearances as specified in the manual.(The engine oil is brand new too, changed just now to suzuki ecstar 10w30 semi synthetic)

About the maintenance:
I followed the break in process (not running the engine at the same speed during the 1st 1600 kms, not using more than half throttle for 800kms and 3/4th till 1600kms, but I did use the accelerator within the limits and not completely baby the engine until 1600 kms) I never rev the engine hard unless the engine has reached the normal operating temperature(It has an engine temperature gauge).

Now will this noise go away if the valve clearances are inspected (and corrected if out of spec) and are there any long term implications of not attending to this? Or should I just leave it at this and use the vehicle as usual, and this noise is normal and will not have any long term implications ?

The performance and fuel efficiency has been good for an 125cc scooter, with fuel efficiencies upto 67km/l when driven sanely(Calculated with Fuelio) and It has gone upto 102km/h, the pull is really good after 60km/h.

Edit: Now I am able to hear the noise at all times, not only when the engine is warm

Last edited by libranof1987 : 12th November 2024 at 21:17. Reason: Merging posts
Suryaa is offline   (5) Thanks
Old 12th November 2024, 21:12   #2
Senior - BHPian
 
shancz's Avatar
 
Join Date: Oct 2020
Location: Ranchi
Posts: 1,975
Thanked: 5,475 Times
re: Concerned about the idling sound from my scooter engine

Haven't experienced the BS6 so can't comment much on the noise but I have had a disappointing experience with the Ecstar R5000/7000 oils in all aspects.
I would suggest to move to fully synthetics once you're out of warranty.

As for your situation, visit another ASC.
shancz is offline   (1) Thanks
Old 13th November 2024, 06:02   #3
BHPian
 
Sensible_Speed's Avatar
 
Join Date: Jun 2023
Location: Bengaluru
Posts: 205
Thanked: 523 Times
re: Concerned about the idling sound from my scooter engine

Valves rubbing against the piston is catastrophic. Your scooter would've seized very quickly if that were the case. While it is true that most ASS mechanics don't bother to check the valves as it's too much labour, I wouldn't jump to a conclusion. Start with your exhaust first to ensure there isn't any leak. Then proceed to the engine itself. Remove the seat and under-seat storage to have a look at the engine. It should be fairly straightforward with a few screws. Run it to see if there's any odd rattling in the mounts. That could pinpoint you to the problem. If you are pensive about doing it yourself, take it to a different mechanic; one that you trust to do a fair job.
Sensible_Speed is offline   (1) Thanks
Old 13th November 2024, 08:40   #4
BHPian
 
Shonith's Avatar
 
Join Date: Mar 2021
Location: Mangalore
Posts: 129
Thanked: 369 Times
re: Concerned about the idling sound from my scooter engine

Quote:
Originally Posted by Suryaa View Post

Is this idling sound normal for an access 125? Isn't there a noise indicating improper valve clearances?(The ticking noise)
The noise will start only when the engine is in the "hot" condition, after driving it for around 15-20 kms.
I don’t have experience with scooters but bikes and large marine engines, yes.
If valve clearance is off then it will produce a faint ticking sound when the engine gets warm, this will progress with time gradually.
Engine will also take time to start after its warm (it will take more cranks to start).

Valve clearance on scooters should be fairly simple since they have screw type arrangement as opposed to shims used on some bikes.

You should probably get it inspected by a local mechanic who works on scooters. The problem could be something simple.

Quote:
Now will this noise go away if the valve clearances are inspected (and corrected if out of spec) and are there any long term implications of not attending to this? Or should I just leave it at this and use the vehicle as usual, and this noise is normal and will not have any long term implications
If the valve clearance is off and you dont attend to it then you are looking at a head rebuild. The valves will cause blow past and the exhaust will eat away at the valve and the seat.
Shonith is offline   (1) Thanks
Old 13th November 2024, 12:20   #5
Newbie
 
Join Date: Dec 2022
Location: Coimbatore
Posts: 12
Thanked: 12 Times
re: Concerned about the idling sound from my scooter engine

Quote:
Originally Posted by shancz View Post
Haven't experienced the BS6 so can't comment much on the noise but I have had a disappointing experience with the Ecstar R5000/7000 oils in all aspects.
I would suggest to move to fully synthetics once you're out of warranty.

As for your situation, visit another ASC.
I will try a synthetic oil next time for sure, my scooter had noticeable vibrations after around 2200 kms after changing the oil and doesn't hold up well during long rides .On the ASC situation all the ASC's here seem to have the same problem, whichever one I check there are a ton of poor reviews "The advisors are not knowleadgable and will not attend to your problem, please find another proper mechanic"

Quote:
Originally Posted by Sensible_Speed View Post
Valves rubbing against the piston is catastrophic. Your scooter would've seized very quickly if that were the case. While it is true that most ASS mechanics don't bother to check the valves as it's too much labour, I wouldn't jump to a conclusion. Start with your exhaust first to ensure there isn't any leak. Then proceed to the engine itself. Remove the seat and under-seat storage to have a look at the engine. It should be fairly straightforward with a few screws. Run it to see if there's any odd rattling in the mounts. That could pinpoint you to the problem. If you are pensive about doing it yourself, take it to a different mechanic; one that you trust to do a fair job.
Alright I'll first confirm that this is the issue and then inspect the clearances if necessary. Thanks

Quote:
Originally Posted by Shonith View Post
I don’t have experience with scooters but bikes and large marine engines, yes.
If valve clearance is off then it will produce a faint ticking sound when the engine gets warm, this will progress with time gradually.
Engine will also take time to start after its warm (it will take more cranks to start).

Valve clearance on scooters should be fairly simple since they have screw type arrangement as opposed to shims used on some bikes.

You should probably get it inspected by a local mechanic who works on scooters. The problem could be something simple.



If the valve clearance is off and you dont attend to it then you are looking at a head rebuild. The valves will cause blow past and the exhaust will eat away at the valve and the seat.
I will pinpoint the source of the issue first, and if it seems to point to improper valve clearances I'll inspect them definitely, Thank you

The clearances as per the suzuki service manual are 0.04-0.08 mm for the intake valve and 0.12-0.16 mm for the exhaust valve. The procedure is fairly straightforward, bring the piston to tdc by rotating the fan and aligning it with the mark provided, open the head cover and adjust to required clearances using a set of feeler gauges and then replace the gasket while closing it. I will make sure to not reduce the clearance too much. Thank you guys and please do point out any other things I might have missed.

Here are some pictures:
Attached Thumbnails
Concerned about the idling sound from my scooter engine-screenshot_20241113121725433.png  

Concerned about the idling sound from my scooter engine-pxl_20241019_1530193212.jpg  

Concerned about the idling sound from my scooter engine-pxl_20241023_1853076622.jpg  

Suryaa is offline   (3) Thanks
Old 13th November 2024, 13:06   #6
BHPian
 
b16h22's Avatar
 
Join Date: Feb 2015
Location: Thrissur
Posts: 639
Thanked: 1,653 Times
re: Concerned about the idling sound from my scooter engine

Quote:
Originally Posted by Suryaa View Post
I own an Access 125 bs6, which is ~ 2.5 months old and has been driven for around 3000 kms. [I will post a separate thread for the ownership review if anyone is interested]. Now, I request someone who has first hand experience with engines (or has owned an access 125 bs6 for a long time) to help me out here :

Edit: Now I am able to hear the noise at all times, not only when the engine is warm
If the noise sounds like a rattling noise, and it is coming from the CVT area, there is a good chance it is coming from the variator and rollers. The scooter is relatively new to have worn rollers or something but there is always a chance. My old access makes a bit of a racket from the variator area but it is 8 years old. Most old scooters do as well. It's worth pointing this out to the service center technicians. Very little chances of valve clearances being out of spec on this engine. I recently checked and adjusted the valves at 34k and they were just a bit on the tighter side of the clearance, after all that running.
b16h22 is online now   (1) Thanks
Old 15th November 2024, 11:09   #7
BHPian
 
rkv_2401's Avatar
 
Join Date: Mar 2020
Location: Sydney
Posts: 187
Thanked: 713 Times
Re: Concerned about the idling sound from my scooter engine

I've owned a Swish 125 for many years, and your scooter sounds fine to me. Maybe you could post a higher quality audio recording closer to the source of noise showcasing the problem if you're concerned.
rkv_2401 is offline   (1) Thanks
Old 15th November 2024, 13:42   #8
Newbie
 
Join Date: May 2024
Location: Pune
Posts: 8
Thanked: 20 Times
Re: Concerned about the idling sound from my scooter engine

Surprisingly this problem is not common to just the Access125 few Jupiters have also had this problem. My friend faced faced a similar issue but for him it was a bad rpm sensor which resulted in rpm fluctuations, Suzuki officials covered the expenses for him but as far as I know the original Hideling sensor that comes in the access is defective, earlier burgmans also had this issue but it was fixed later.
veyron_music is offline  
Old 20th November 2024, 20:02   #9
BHPian
 
Crankpin's Avatar
 
Join Date: Apr 2006
Location: Pune
Posts: 315
Thanked: 216 Times
Re: Concerned about the idling sound from my scooter engine

My Access 125(2018) had multiple issues with the timing chain and was noisy. Get the timing chain inspected and adjusted if for some reason it's loose. Another area which needs to be looked is the CVT. If you do service the CVT, it's best never to use any grease on the rollers or anywhere near the roller/ assembly.
Crankpin is offline  
Reply

Most Viewed
Thread Tools Search this Thread
Search this Thread:

Advanced Search

Copyright ©2000 - 2024, Team-BHP.com
Proudly powered by E2E Networks