Team-BHP
(
https://www.team-bhp.com/forum/)
v4.0
The v4.0 Team-BHP Hoodies & Collared Jackets are an evolution of the comfortable and durable jackets from previous years.
What's new for this generation:
• Two different front print options.
Choose between a large vertical print...
Or a smaller more conservative design:
If you prefer an even more minimal look, you can leave the personalized text blank:
• Choose between 3 rear print options, each of which is a dual-colour design (or keep the rear blank if you prefer).
The 3 print options shown on Anthracite Grey:
On Navy Blue:
And on Red:
• A new sleeveless option is available in both, a collared and a hooded version:
• International Shipping is available! If you don't see your country listed,
write to us and we'll add it.
• And "Bug fixes & performance improvements" :D
PERSONALIZATION - Add any text of your choice:
As always, you can add absolutely any text to the front of the garment, making it truly yours.
THE FINER DETAILS
The tape that lines the inside of the zipper has a TEAM-BHP design with the 'Live To Drive' tagline custom-woven onto it:
It wraps around the hood too:
The clean look on the front of the jackets are maintained by concealing the heavy-duty 8mm zipper entirely (the fabric folds over it):
The pockets are hidden away in a welt-pocket style, and they're secured by solid 5mm zippers as well. This is absolutely essential for keeping your belongings safe, especially if you're a biker or active wearer:
Extra cold? Use the drawstring on the hood to tighten it up:
Popular Team-BHP touches remain common across all our Official Gear, like our
under-the-hood labels (I4, V6, V8, V10, V12, W16):
And here's what the waist label looks like on each colour:

The Garment• These hoodies & jackets are made from a 280-300 GSM 90/10 poly-cotton blend fabric, similar to the previous years.
• There's fluffy super-soft fleece on the inside to keep you warm and the pockets are lined with the same material.
• A heat-fused lining inside the collar lets you wear it with your collar up or down, as per your preference.
• The cuffs and waistband have a small serving of Lycra to keep them elastic and well fitted.
• The 8mm wide front zipper is super heavy-duty; it's the 335/45R18 of zippers. A gunmetal puller runs up and down its tracks.
• The front zipper makes these jackets more versatile in a wider range of temperatures and aids ingress & egress.
• The pockets get similar 5mm zippers to keep your valuables safe.
Prints & Personalization• All the text is heat-pressed on to the fabric, and has the sharpest edges you'll ever see on a print. It won't crack or fade over time either.
• The personalized text can be a maximum of 20 characters in length. Numbers and special characters are allowed.
• The text will always be printed in ALL CAPS, regardless of how it is entered.
• If you do not want any personalized text printed on the front, you can leave the field blank.
• Do check the store listing for expected printing time, before your hoodie ships out...
Sizing
•
** IMPORTANT** : Order the
same size as the Team-BHP Tees (or v3 Hoodies) you wear. Simple.
• If you've never worn a Team-BHP Tee, then use the chart below. Ideally, compare the measurements with a garment that fits you well:

NOTE:
• The same letter-size (eg. "XL") has slightly different measurements between the Tees & Hoodies. The Hoodies/Jackets are slightly larger to take into account that they are outer-wear.
• If comparing to the v2 hoodies (with the red zippers), the M, L, 2XL & 3XL sizes have gotten noticeably larger in the v3 & v4 generations.
Thanks for the update.Pockets for shoulder and elbow Armour would have been icing on the cake, but given the sheer variety and size of these armors, it would have be a design nightmare!!!
Beautiful attention to detail. I'm sure this will last as long as the vehicles we own! Until when are these available? Is it limited stock?
Quote:
Originally Posted by Rehaan
(Post 4728632)
The tape that lines the inside of the zipper has a TEAM-BHP design with the 'Live To Drive' tagline custom-woven onto it. |
Hi Rehaan, thank you for your efforts bringing out this well-crafted product!
I have a minor bone to pick - Can we place an order in which the custom tagline is replaced by something generic? I am that minimalist guy who just wears clothes (polos, shirts, sweatshirts) in solid shades with just the brand logo on the left side.
I actually want the full-sleeve Hoodie variant in Navy Blue and the loud-for-my-liking Custom lining (especially around the hood) is preventing me from currently going ahead.
I'll totally get it if you're unable to alter/introduce a new design.
Cheers!
Quote:
Originally Posted by Neo18
(Post 4728679)
Thanks for the update.Pockets for shoulder and elbow Armour would have been icing on the cake, but given the sheer variety and size of these armors, it would have be a design nightmare!!! |
+1, Makes good sense if there were pockets for shoulder and elbow armors. Would have been a very good city ride safety kit for daily use.
Should not have been an issue considering that armors are generally standard sized.
Quote:
Originally Posted by sharktale
(Post 4728806)
the loud-for-my-liking Custom lining (especially around the hood) is preventing me from currently going ahead.
|
I have this concern as well.. the lining around hood prevents me from buying it. Rest is a good design according to me.
Just got the message that my Anthracite jacket is ready to be shipped. Unlike the last few times, this time I am an early adopter for the Version 4 jacket. Can't wait for the package to land up, just in time for the last few days of winter season clap: I had got the hoodie from the last version, so this time it is the non hooded jacket.
Just got my red and Anthracite jackets, I will list a couple of issues :
1) Elasticity in the waist liner is non existent cause of which atleast for me the fit becomes from great to a meh.
2) I switched from Hoodie to a jacket without realizing that the material is the same, so as a jacket it's not for Delhi winters but more so for October and March winter. But that's not a failure of the Jackets but my reading comprehension.
3) Collar lining is again not good and doesnt work well for collar up
The Hoodies look great. I liked the T-shirts too. I was actually wondering how many would like to order the Hoodie from the US. That way we can place a collective order and save on shipping cost. If that makes sense.
I am in Pittsburgh, PA.
Mods : Is any of the Mods based out of the US who orders it for members in this part of the globe ?
Just ordered my sleeveless collared jacket. Eagerly waiting for the delivery as the winter is not going to last long. Thanks for adding the sleeveless option.:thumbs up
I just received my Anthracite Gray Jacket. It fits me perfectly, and I had ordered size M by keeping in mind the reference of the same size t-shirt. :)
I'm loving the pockets provided on the inside! They surely come in handy for keeping gloves/scarves! clap:
Quote:
Originally Posted by Neo18
(Post 4728679)
Pockets for shoulder and elbow Armour would have been icing on the cake |
Interesting idea! I've added it as a possibility to the v5 Hoodies. However, I have to say that I am very hesitant to create any "safety" related products unless they are 100% successful at doing their job. There would be a lot more R&D involved in having this implemented in a way that would actually work perfectly, rather than just be for the name of it.
Quote:
Originally Posted by Arjun Bharadwaj
(Post 4728803)
Until when are these available? Is it limited stock? |
Being seasonal, it is limited stock. Can't say how long they'll be available, but usually certain popular combinations go out of stock first.
Quote:
Originally Posted by sharktale
(Post 4728806)
Can we place an order in which the custom tagline is replaced by something generic? |
If you're talking about the chest print, you can leave that field blank, and only "TEAM-BHP" will be printed on the chest.
If you mean the woven tape, that isn't changeable as it's a structural part of the jackets.
Quote:
Originally Posted by amods
(Post 4728843)
I have this concern as well.. |
Have noted sharktale & your (+ a few other members') preferences on this...
Quote:
Originally Posted by sandhyab
(Post 4729361)
Just got my red and Anthracite jackets |
Thanks for your feedback! Hope that aside from the points you mentioned, everything else was to your liking.
Quote:
Originally Posted by nikhilarni
(Post 4729488)
I was actually wondering how many would like to order the Hoodie from the US. |
From what I've seen, International shipping on this scale is entirely weight based, so you would not really get too much of an advantage from adding more items to the order.
Quote:
Originally Posted by RnK
(Post 4729913)
It fits me perfectly, and I had ordered size M by keeping in mind the reference of the same size t-shirt. |
Glad to hear that :thumbs up
Quote:
Originally Posted by RnK
(Post 4729913)
I'm loving the pockets provided on the inside! They surely come in handy for keeping gloves/scarves! |
Please note that if you're referring to accessing the pockets from inside of the jacket, they are not intended to be pockets, but rather just the structure of the actual zippered pockets. Don't use these as storage for small items , as there are gaps where they can fall though!
Just got mine in red color and though I liked it a lot it seem a size bigger than the last years "L" size. I just wish if the rear can have custom text instead of predefined ones.
All times are GMT +5.5. The time now is 11:46. | |