Team-BHP > Under the Hood > Technical Stuff

Thread Tools Search this Thread
Old 7th February 2008, 19:14   #1
Join Date: Apr 2007
Location: Bangalore
Posts: 373
Thanked: 40 Times
Default Vibrations in lower gears.

Recently I put a K&N stock replacement filter on my Baleno.
I did feel a change bcos of this mainly
1) The pick ups seems to be more
2) the power drop when the AC is turned on has reduced a bit. i could feel the power drop before.

but when i put it to 1st gear and start moving or i hold the clutch a little bit more mainly in the traffic signals, i get a vibration from the bonet area. i never experienced this with the normal filter. otherwise i do not see any running issues. in fact i feel there is also a slight change in the FE( i dont know if it bcos of this or semi-synthetic oil change)

do i show it some service guys or is it normal ?

pls advice.

madhukar_n is offline   Reply With Quote
Old 7th February 2008, 20:37   #2
Senior - BHPian
Join Date: Jun 2007
Location: Kochi
Posts: 2,275
Thanked: 245 Times

I think this is in the wrong section?
BaCkSeAtDrIVeR is online now   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Similar Threads
Thread Thread Starter Forum Replies Last Post
Solution for vibrations after installing alloy wheels sAP Tyre & Alloy wheel Section 189 11th December 2016 12:47
Gear-shift lever vibrations girishab Technical Stuff 12 10th June 2008 13:48
Wheel vibrations on the Mumbai-Pune expressway? RX135 Shifting gears 30 4th February 2008 16:35
Vibrations under hard braking RJK Technical Stuff 15 21st July 2005 13:42
vibrations in zen 97 carb. heavy_foot Technical Stuff 11 30th May 2005 11:01

All times are GMT +5.5. The time now is 08:25.

Copyright 2000 - 2019,
Proudly powered by E2E Networks