Team-BHP
(
https://www.team-bhp.com/forum/)
New boots alert!! 
Fitted MOMO Massimo wheels on my Duster AWD.
Size: 16" (stock height)
Width: 7.5J (stock +1)
ET/Offset: 28 (+/- ??, Dont know original measurements)
Tyres (carried over): Maxxis Bravo 771 (235/60R16).
Now looking for rally spec mudflaps to contain the spray on sides and back.
Respected members of team bhp,
Here are a few more shots of modified kia sonet htk+ sitting on 235/40/R18 continental tyres fitted on 18 inch hyper silver alloy wheels
Have a great day folks. Cheers.
I have just got these GTR Pro 15" rims for my Contessa.
Momo Massimo on Kia Seltos. Love the looks
I'm trying to find some wheels for my Altroz, 16 inch 108 PCD. Can't seem to find too many good designs apart from one Momo and one Uno Minda one. Any online dealers or ones in Bangalore who may have more designs?
Quote:
Originally Posted by nomad47
(Post 5441906)
Momo Massimo on Kia Seltos. Love the looks
|
Same pinch. clap:
What size are you running?
Quote:
Originally Posted by 88_TANK_88
(Post 5449642)
Same pinch. clap:
What size are you running?
|
16". I did not upsize to avoid speedometer error
Quote:
Originally Posted by nomad47
(Post 5449649)
16". I did not upsize to avoid speedometer error
|
I needed wider wheels for the 235 section tyre I am running. My stock wheel was 6.5J and the tyres felt always pinched and looked underinflated. Now the tyres fit well and are not stressed.
Quote:
Originally Posted by 88_TANK_88
(Post 5449670)
I needed wider wheels for the 235 section tyre I am running. My stock wheel was 6.5J and the tyres felt always pinched and looked underinflated. Now the tyres fit well and are not stressed.
|
I went with the stock configuration. My OEM wheels were 6J, and these are 7J. The tyres look like bulging out giving a pseudo wider section looks even if they are not
Neo 16inch wheels installed in Kia seltos
Upgraded the Alloy wheels on my 2020 VW Ameo Highline Plus DSG. Retained the same tyre (195/55 R16).
Tell me how it looks!
I would call this pic:
volkSWAGen:)
Quote:
Originally Posted by SavoyWalrus
(Post 5449488)
I'm trying to find some wheels for my Altroz, 16 inch 108 PCD. Can't seem to find too many good designs apart from one Momo and one Uno Minda one. Any online dealers or ones in Bangalore who may have more designs?
|
Try the below link:
https://www.alloywheelsindia.com
Their shop is located in Malleshwaram and they can source and fit the wheels that you see online at their store here:
https://goo.gl/maps/277XuYDQHzjzUQFL9.
I bought the wheels for Laura many years ago from here and they're pretty good.
I had these on my Honda City 5th gen. I got them by swapping the stock alloys and tyres (mrf to Continental) that came with my car because stock tyres and alloys that car came with initially were horrendous. I have been lucky with my Polo TSI and Harrier as they came with decent alloys factory fitted so they are doable till I perform a tyre upgrade.
Replaced the stock wheels on my Altroz iTurbo with the Momo Revenge matt black ones at Hercules Tyres in Bangalore. Hercules bought back the stock Tata wheels and gave me a good deal :)
Quote:
Originally Posted by SavoyWalrus
(Post 5467740)
Replaced the stock wheels on my Altroz iTurbo with the Momo Revenge matt black ones at Hercules Tyres in Bangalore. Hercules bought back the stock Tata wheels and gave me a good deal :)
|
Congratulations! I see you went to Hercules. Coincidentally, I had the same Momo Revenge wrapped in Michelin P3ST in 17", on my Laura TSI that I'd mentioned in my previous post. I personally like this design and think black Revenge wheels look great on white cars.
| All times are GMT +5.5. The time now is 08:50. | |
